690082

Winix P150UK Manual

12
Zoom out
Zoom in
Previous page
1/114
Next page
AIR CLEANER SET-UP
Set-Up Procedure
1. Remove protective film from the control
panel.
2. Remove the front panel by pulling gently on
the lower portion of the panel. Do not force,
the panel should remove easily.
3. Remove the plastic frame from the unit.
4. Remove the True HEPA Filter and remove
the plastic wrapper from the filter.
5. Install the True HEPA Filter with the arrow
showing “air flow” pointing in toward the
back of the air cleaner; the white tabs at
the top and bottom of the HEPA filter will
point out to the front of the unit.
6. Open the resealable plastic bag containing
the Carbon Pre-Filters and remove one
filter. Reseal the plastic bag to maintain
the freshness of the remaining filter.
7. Install the Carbon Pre-Filter onto the plastic
frame by pushing against all “hook and
loop” squares on the back of the frame.
(Diag. 7A)
8. Install the plastic frame by inserting tabs up
into the air cleaner and gently pushing in at
the bottom tab until the frame fits into place
snuggly.
9. Replace the front panel by hooking the
panel on the top of the unit. Swing the
panel in by pushing gently on each side of
the unit and then lock it into place.
10. Plug the power cord into a wall outlet.
11. Press and hold the POWER button until
a short “beep” sounds.
12. The air cleaner will take 3~4 minutes
to calibrate the AIR QUALITY sensor.
During this time the sensor lights will flash
on and off. Once the sensor has calibrated,
the lights will begin in AUTO mode.
13. Remove tab from remote control
(WACP300 / WACP450 only.)
Note: For best results and to maximize air flow:
• Place unit at least 2 feet away from the wall.
• Place the unit away from drafty areas, as the
sensors may not react accurately.
• Do not place near curtains, furniture, or
other items that might inhibit air flow.
• Place the unit on a stable surface.
10
7A
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Winix P150UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Winix P150UK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 26,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info