690076
129
Zoom out
Zoom in
Previous page
1/144
Next page
WINIX AIR CLEANE
R
HR1000
User Manual
x
Please read and follow all safety rules and instructions in
this manual before operating.
x
The product warranty is printed on the back of this guide,
so please keep it in a safe place for future use.
Model
Use & Care
Guide
2
English
HR 1000
CONTENTS
Set Up
Where to use 5
Installing the filters 6
Safety Instructions
Safety and Cautions 8
Operation
Initial Operation 9
Modes of Operation 10
Features and Settings 11
WINIX SMART Set Up 13
Care and Maintenance
Filter Care 14
Smart Sensor Care 18
Cleaning Care 19
Troubleshooting
Frequently Asked Questions 20
Unit Specifications 22
Product Warranty 24
5-Stage Air Purification 3
Controls 4
This product is suitable for 220 ~ 240V only.
French 25
Spanish 49
German 73
Italian 97
Nederlands 121
3
English
HR 1000
PlasmaWave®
4 Anti-microbial coated
3 True HEPA filter
2 (CD) Coated Deodorization
Carbon filter
1 Pre-filter
5-STAGE AIR PURIFICATION
non-removable
replaceable
washable
replaceable
5
6
PACKAGE CONTENTS
WINIX AIR CLEANER
Model
Use & Care
Guide
HR950, HR951
Please read and follow all safety rules and instructions in
this manual before operating.
The product warranty is printed on the back of this guide,
so please keep it in a safe place for future use.
This product is manufactured for use only in USA.
Product
Pre-filter/CD Carbon Filter/
Anti-microbial True HEPA filter
(Included with the product.)
Power cord with
plug
User Manual
4
English
HR 1000
Air
Outlet
Vent
Light Sensor
Detects the amount of
ambient light within
the environment, to
adjust the brightness
of the LED indicators.
Timer Indicator
If timer has been set, the LED
light Indicates the set time of
operation.
PlasmaWave® Indicator
Indicates whether
PlasmaWave® is
enabled or disabled.
Smart Sensor
Automatically
detects indoor air
quality.
Child Lock Indicator
LED light indicates
whether Child Lock mode
is enabled or disabled.
Wi-Fi Strength Indicator
Displays the strength of the Wi-Fi
connection.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium, High, Turbo)
Power Button
Turns the unit on or
off.
Timer / Air Quality Button
Press to cycle through and set
desired length of operation (1hr,
4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds to
enable or disable the Air Quality
light.
PlasmaWave® / Child Lock Button
Enables or disables PlasmaWave®. Press and hold for 3
seconds to enable or disable the Child Lock mode.
Check Filter
Indicator
LED light indicates
when it is time to
change the filter.
Reset Button
After replacing a filter, press
the RESET button for at least
5 seconds.
CONTROLS
Wi-Fi Button
Enables or disables
Wi-Fi function.
WINIX SMART
Indicator
LED light indicates
when WINIX SMART is
active with your unit.
Installation | Set up
5
English
HR 1000
WARNING
Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
WHERE TO USE
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships, etc.)
Do not place near any flammable materials
(aerosols, fuel, gases etc.)
Do not place below any electrical outlet
Do not place around heating elements
Do not place in an area with excessive
amounts of noxious gases
Do not have unit facing into wind or draft
Do not place in excessively humid areas
where unit may become wet
Allow 30 ~ 46 cm. of space between TVs, radios, and other electronic products
electromagnetic interference from certain electronics may cause product malfunction.
Place indoors away from direct sun light
direct exposure may cause product malfunction or failure.
Only place on hard, flat surfaces
flimsy or slanted surfaces may result in abnormal noise and vibrations.
This unit is not intended to be used to preserve documents or in art conservation.
30~46 cm
10 cm
6
Set up | Installation
English
HR 1000
3 Anti-microbial
True HEPA filter
2
CD Carbon
filter
1 Pre-filter
INSTALLING THE FILTERS
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
Operating the unit without removing the plastic wrap may result in product failure.
Unplug and make sure the unit is turned off before installing filters.
The unit will automatically power off when front panel is opened.
①
Remove the front panel by grasping
its upper edge and gently pulling
towards yourself.
x
To remove the front panel, the latch
at the lower edge of the panel must
be released from its position.
Latch
②
Remove the filters from the unit,
they are protected inside a plastic
wrap.
③
Remove filters from protective
plastic wrap.
x
Operating the unit without removing
lters from plastic may cause abnormal
noise, deformation, or re as a result of
overheating.
④
Install the filters until they fit
securely in place.
Filters must be installed in this order:
3 Anti-microbial True HEPA filter
(rear)
2 CD Carbon filter (middle)
1 Pre-filter (front)
x
To install the pre-lter, insert
bottom tabs into the slots on either side
of the lower part of the unit, then rotate
upward to insert the upper tabs into the
slots at the top part of the unit until both
sides audibly click into place.
Installation | Set up
7
English
HR 1000
⑤
Replace the front panel by first
inserting the latch at the bottom
edge into the base of the unit, then
rotate the panel upward toward the
top of the unit until it magnetically
snaps closed.
⑥
When to service and replace filters:
Filter Indicator Light
When to
service
When to
replace
1 Pre-filter
none
Clean once
every 14 days
Permanent
2 CD Carbon filter
Can NOT be
WASHED
Lasts up to
12 months
3 Anti-microbial True
HEPA filter
Intervals between filter replacement may vary depending on environment.
For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
Refer to pages 14-18 for detailed information on filter care and
how to replace them.
INSTALLING THE FILTERS
this unit
is compatible
with this
filter
ITEM: 117130
FILTER
J
Safety Instructions | Operation
8
English
HR 1000
SAFETY AND CAUTIONS
Before operating this equipment, carefully read and follow these safety cautions and
instructions to avoid damage and ensure safe use.
WARNING
Follow these instructions to reduce the risk of serious
injury or death and to reduce risk of damaging the unit.
Ensure filters are inserted before running unit
running unit without filters can shorten the units life and cause electric shock or injury.
Be sure foreign objects are NOT inserted into the vents on the unit
objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
the high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked
blockage may lead to increased internal temperatures causing product failure and deformation.
Do not use the unit as a step stool or place heavy objects on it
personal injury may occur or product failure and deformation.
Do not pull on the power cord when
unplugging the unit
Do not touch the plug with wet hands
Do not plug additional appliances into the
same outlet or power supply
Unplug unit when not in operation for
extended periods of time
Do not tie or knot power cord when unit
is in operation
Do not unplug or move the unit while in
operation
If the unit becomes submerged in water,
unplug it and contact customer service
Cord can become damaged by forcefully
bending, pulling, twisting, bundling,
pinching or placing heavy objects on it
If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
This appliance is not intended for use by a person (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Operating the air cleaner | Operation
9
English
HR 1000
①
Insert the unit plug into an electrical outlet.
x
The Control Panel lights will turn on and o.
②
Press the [Power] button.
During the first 4 minutes of power up,
the Air Quality light will flash as the
Smart Sensors measure the air quality in
the environment, after which normal
operation will begin.
③
By default, when the unit first powers on, the mode will be set to Auto
with PlasmaWave® enabled.
x
When in Auto Mode the fan speed will be automatically adjusted according to the
environments air quality.
x
PlasmaWave® works to remove harmful airborne contaminants.
In Auto mode, as the indoor air quality improves, the fan speed
will automatically be reduced to Low.
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product failure. To
disable PlasmaWave®, see page 11.
INITIAL OPERATION
Operation | Operating the air cleaner
10
English
HR 1000
1.
Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
①
Press the Mode button to select Auto mode.
x
The mode LED light will indicate when Auto mode has been selected, and
operation will begin.
x
Each time the Mode button is pressed, the modes will be cycled.
(Auto, Sleep, Low, Medium, High, Turbo).
When in Auto Mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases the fan speed will automatically be
increased.
When unit is first started, Auto Mode is enabled and set to Low
fan speed.
2.
Sleep Mode
①
Press the Mode button to select Sleep
mode.
x
The mode LED light will indicate when ‘Sleep’
mode has been selected, and operation in
that mode will begin.
When Sleep mode is selected, the fan
speed is automatically set to Low. Fan
speed can be changed by pressing the
Fan Speed (Mode) Button.
When Sleep Mode is enabled, the Air
Quality light is disabled.
AUTO AND SLEEP
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
Care and Maintenance
14
English
HR 1000
1.
Changing Filters
When the Check Filter indicator LED is on, it is time to replace both the Anti-microbial
True HEPA and CD Carbon filters.
Filter Indicator Light
When to
service
When to
replace
1 Pre-filter
-
Clean once
every 14 days
Permanent
2 CD Carbon filter
Can NOT be
WASHED
Lasts up to
12 months
3 Anti-microbial True
HEPA filter
Intervals between filter replacement may vary depending on environment.
For optimal use Pre-filter can be cleaned every 14 days which can extend the life of
other filters.
FILTER CARE
Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
The unit will automatically power off when front panel is opened.
①
Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
x
To remove the front panel, the latch at the
lower edge of the panel must be released
from its position.
Latch
Autre | Dépannage
20
Français
HR 1000
Problem Check / Actions to take
It does not turn on
at all.
Is there a power outage?
Check to see if other lights and electrical
equipment are working and try again.
It doesn’t work in Auto
mode.
Has Auto mode been selected?
Press the Mode button until Auto mode is
selected.
Is the sensor blocked or clogged?
Clear the sensor using a vacuum cleaner.
view page 18
It vibrates and makes a
lot of noise.
Is it running on a slanted surface?
Move the unit to a hard, flat area of the floor.
FREQUENTLY ASKED QUESTIONS
Dépannage | Autre
21
Français
HR 1000
Problem Check / Actions to take
The power plug and
outlet feel hot.
Is the plug securely plugged in?
Make sure the plug is properly plugged into the
outlet.
There is a strange
smell.
Is it being used in a place with a lot of smoke,
dust, or odors?
x
Clean the air intakes on the front sides of the unit
and clean the pre-lter.
x
Contact customer service to conrm the exact
cause.
x
Replace the CD Carbon lter and Anti-microbial True
HEPA lter.
The product is not
purifying the air
enough.
Is the Check Filter indicator light on?
Replace the filters as required.
FREQUENTLY ASKED QUESTIONS
Gebruik | De luchtreiniger gebruiken
129
Nederlands
HR 1000
①
Steek het stroomsnoer in de aansluiting ( ) aan de achterzijde van
het apparaat en steek de stekker in het stopcontact ( ).
x
De lampjes op het bedieningspaneel gaan nu aan en weer uit.
②
Druk op de aan-/uitknop.
Gedurende de eerste 4 minuten na
inschakeling van het apparaat flikkert de
ledindicatie voor de luchtkwaliteit. De
smart sensors meten nu de
luchtkwaliteit in de ruimte. Zodra deze
meting is afgerond, gaat het apparaat
over op een normale werking.
③
Wanneer u het apparaat inschakelt, staat het standaard in de Auto-
modus en is PlasmaWave® geactiveerd.
x
In de Auto-modus wordt de ventilatorsnelheid automatisch aangepast op basis van de
luchtkwaliteit in de ruimte.
x
PlasmaWave® verwijdert schadelijke verontreinigingen uit de lucht.
In de Auto-modus wordt de ventilatorsnelheid automatisch
verlaagd wanneer de luchtkwaliteit verbetert.
Wanneer het apparaat in gebruik is, kunt u een piepend of
zoemend geluid horen. Dit geluid ontstaat doordat grotere
deeltjes door PlasmaWave® passeren. Dit is dus normaal en wijst
in geen geval op een defect. Zie pagina 131 voor meer informatie
over het uitschakelen van PlasmaWave®.
EERSTE GEBRUIK
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Winix HR1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Winix HR1000 in the language / languages: German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 44,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info