774415

Wilfa WKD-2200S - until 2020 Manual

15
Zoom out
Zoom in
Previous page
1/17
Next page
Special Safety Instructions for the Kettle
• Use only cold water when filling the device.
• The water level must be between the MAX. and MIN. marks.
• Switch the kettle off before removing it from the base.
• Always ensure that the lid is tightly closed.
• The base and exterior of the kettle must not become wet.
• Kettle body used must match with the kettle base.
First Use of the Kettle
Before using the kettle for the first time, fill the kettle with cold water and boiled
it twice without any additives.
Fill the kettle with water. Do not overfill. Use the water level indicator.
Place the kettle on the base.
• Press the “ ” key shortly, with the sound “Di.”, it starts running. After the
water boils, indicator turns off and the buzzer sends out a sound “Di” at the
same time.
• Press “ ”for 3 seconds, with the buzzer sends out “Di”sound, it starts run-
ning the function of heat insulation. The LED light will be shinning with red
light, while after the water boils, the kettle will keep the water temperature for
2 hours with the indicator light shinning. During the 2 hours heat insulation
function running, it will go on heating when the temperature arrives at 85°C.
• Press “ ”for once, the indicator light of 60°C shines, with the green LED
light. It means that it will stop heating when the water temperature is 60°C.
• Press “ ” for twice, the indicator light of 70°C shines, with the blue LED
light. It means that it will stop heating when the water temperature is 70°C.
• Press “ ”for 3 times, the indicator light of 80°C shines, with the orange
LED light. It means that it will stop heating when the water temperature is
80°C.
• Press “ ”for 4 times we can see the indicator light of 90°C shines, with the
purple LED light. It means that it will stop heating when the water tempera-
ture is 90°C.
After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
If the kettle is overfilled, boiling water may be ejected.
The kettle is only to be used with the stand provided.
English
EngelskEngelskEnglish
29 30
with liquid. Do not handle the kettle with wet
or moist hands. Should the kettle become wet
or moist, remove the main plug from the socket
immediately.
• DO NOT touch the contents of the kettle.
• Use the kettle only for its intended purpose.
• The kettle is only to be used with the stand
provided.
• If the kettle is overfilled, boiling water may be
ejected.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
• Is there damage to the device or that it does
not work, it must be serviced only by authorized
personnel.
• Before connecting the kettle, check whether the
voltage indicated on the appliance, is the same as
the voltage in your home.
1 2
Light
3
Off
4
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilfa WKD-2200S - until 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilfa WKD-2200S - until 2020 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info