774231
61
Zoom out
Zoom in
Previous page
1/64
Next page
English
13
IMPORTANT INFORMATION
If the motor is dragged to a low speed since the food is too thick or there
is too less liquid in the jar, and operates for a prolonged period, the
temperature monitoring system will trigger and stop the operation of the
motor. In this case, switch off and put the blender to a place with good
ventilation to cool down the motor temperature for approx. 35 minutes.
The system will reset and the blender can be used again.
During operation, close the lid tightly to avoid scalding due to spraying of
hot liquids.
Keep hands and utensils out of the container while the motor is running to
prevent the possibility of severe personal injury and/or damage.
When making hot beverage such as soybean milk, hot soup, please check
whether the lid is secured tightly to the jar to prevent it from falling. It is
advisable to start the operation at low speed setting and then increase the
speed gradually, or use the Pulse Drive mode.
When making sauces (e.g. almond sauce, jam and sesame sauce), stuffing
and nuts, put in between 2 and 3 cups of ingredients. The amount should
neither be too large or too little. Keep the blending time below 2 min. to
prevent any burnt smell due to overheating. Too much ingredients may lead
to overloading and overheating of the motor. In this case, wait till the motor
temperature falls before operating again.
Please put liquid and soft food before putting in hard food or ice cubes.
When the operation finishes, please wait until the blade assembly comes to
a complete stop before taking up the blender jar.
If you feel a scorch smell from the blender, stop the operation immediately.
It may be caused by the abrasion at the rubber cushion base if it is not
properly assembled.
When blending thick and sticky food using high speed, please start the
operation at low speed. If the turning is still idle, disconnect the power and
stir the blender jar using a rubber stirrer to drive out the air capsule trapped
in the food. Then close the lid and switch on to proceed the operation.
Do not operate for more than 10 minutes at a time.
TECHNICAL SPECIFICATIONS
Model No. BPFD-1680MB, BPFD-1680MW
Voltage / Frequency 220-240V ~ 50-60Hz
Rated Power 1680 W
Dimensions (H) 430mm (W) 205mm (D) 174mm
Net Weight 4.3kg
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wilfa BPFD-1680MW - Power Fuel Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wilfa BPFD-1680MW - Power Fuel Digital in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wilfa BPFD-1680MW - Power Fuel Digital

Wilfa BPFD-1680MW - Power Fuel Digital User Manual - German, Dutch, French, Polish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info