745743

Wiking Pacific Manual

20
Zoom out
Zoom in
Previous page
1/52
Next page
20
English
Installation Instructions
Before You Start
Figure 1 is a cross-sectional view of your wood-burning stove. Here
you can gain an overview of the parts of which your stove consists.
Steel smoke deector. Cannot be removed.
Vermiculite smoke deector.
Air intake on the rear plate.
Vermiculite rear plate.
Vermiculite base plates.
Grate.
Log trap.
Air-regulation damper.
Please note: The combustion chamber is covered with plates made of vermiculite, which is
a heat-insulating material. These plates ensure that the optimal combustion temperature is
quickly reached, and they must therefore remain inside in the wood-burning stove.
The permanent steel smoke deector and the loose vermiculite smoke deector ensure that
the passage of smoke through the stove is as long as possible, so that the ue gasses have
more time to emit their warmth within the stove and the surrounding area. In this way you get
more warmth from the wood you add to the stove, as the warm smoke is not simply sent out
through the chimney.
Arrangement of Individual Components
It is important to ensure that all individual components are in place and no damage was done
to them during transport. In Figure 1 you can see where the parts should be located in the
stove. The individual components that you must inspect are:
The vermiculite smoke deector should rest on the side plates and be pushed all the way
back in the combustion chamber.
The rear plate must be pushed all the way back in the combustion chamber.
The base plates must lie at on bottom around the grate.
Once you are sure that the individual components are in place, you may begin with the instal-
lation of the wood-burning stove.
Preparing the Wood-Burning Stove for Use
Before using your wood-burning stove, remove the cardboard pieces used to keep the vermi-
culite plates and ash pan in place inside the combustion chamber during transport. From the
ash pan, remove the user handle, log trap and pipe used for fresh air intake.
Remove the plastic from the log trap and place it in the holders in the front of the combustion
chamber (see gure 1, section 7).
Replace the transport handle with the accompanying user handle (see instruction p. 21).
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
Fig. 1
1
2
3
4
5
7
8
6
1
2
5
7
6
3
8
4
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wiking Pacific at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wiking Pacific in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wiking Pacific

Wiking Pacific User Manual - Dutch, French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info