Manual Widex Com-Dex Remote Mic (page 99 of 100) (English, German, Danish, French, Italian, Spanish)

663080

Zoom out

Zoom in

1/100

COM-DEX

Remote Mic

1.4

1.3

1.1

1.2

1.6

1.5

USER INSTRUCTIONS ........................................................................3

BEDIENUNGSANLEITUNG ................................................................13

MODE D’EMPLOI .............................................................................23

INSTRUCCIONES DE USO ................................................................33

BRUGSANVISNING ......................................................................... 43

LIBRETTO D’INSTRUZIONI ..............................................................53

取扱説明書 ................................................................................. 63

USER INSTRUCTIONS ......................................................................73

FCC AND IC STATEMENTS .......................................................................97

DESCRIPTION OF DEVICE - see illustration 1

1.1 Streaming button

1.2 Power button

1.3 LED

1.4 Microphone and LED

1.5 Charging port

1.6 Clip

Intended use

The COM-DEX Remote Mic device is a microphone with an integrated ra-

dio intended for transmitting sound to a COM-DEX connected to the user’s

hearing aid(s). The aim is to improve the hearing aid user’s ability to hear

speech in difficult listening situations. For optimal connectivity the device

and the COM-DEX must be within sight of each other.

NOTE

Your Remote Mic is only intended to be used with a COM-DEX.

Accessories - see illustration 2

USB cable

USING YOUR DEVICE

Charging your device - see illustration 3

Connect the USB cable to your device and the power supply. It takes ap-

proximately 3 hours to charge your device.

NOTE

Before you can use the device, you must disconnect the USB cable.

Battery life: 8 hours streaming.

Turning the device on and off

To turn on your device:

● Press the power button and keep it pressed for 3 seconds.

To turn off your device:

● Press the power button and keep it pressed for 3 seconds.

The device turns off automatically if it has not been streaming sound for

more than 30 minutes.

Pairing the device

Pairing your device to your COM-DEX

To pair your device to your COM-DEX for the first time, follow these steps:

1. Make sure that your COM-DEX is in pairing mode.

2. Turn on your device. The first time you do this, the device will be set

in pairing mode and it will automatically connect to your COM-DEX.

This can take a few minutes.

NOTE

Once you have paired your device to your COM-DEX, it will remain so and

will connect automatically if your COM-DEX is on.

Resetting the COM-DEX Remote Mic for a new pairing:

1. Turn on your device.

2. Reset your device to factory settings by pushing both buttons for 5

seconds. The device will be set to pairing mode.

3. Follow the pairing procedure described above.

Using the device - see illustration 4

Remove the protective film before using your device.

Place the device on the shirt collar of the person you'd like to hear.

Turn on the device.

To start and stop streaming, simply push the streaming button on your

Remote Mic. While streaming, the LED will show a green light.

NOTE

If you want to operate your device via the COM-DEX app, you'll need to up-

date the app.

Sound adjustment

The sound that is streamed from the device to COM-DEX can be adjusted

in 3 levels. Simply push the power button on the side of the device and

the sound level will be altered in a three step circle (highest level – lowest

level – back to normal level).

Visual indicators - see illustration 5

Your device has two LEDs that flash with different colours. The purpose of

these colours is to inform you of which mode your device is in at any giv-

en time.

● Constant red light on the bottom LED: The device is charging.

● Constant green light on the bottom LED: The device is fully charged.

● Flashing blue-red-blue-red light on both LEDS: The device is ready to

be paired.

● Flashing blue light on the top LED: The device is on, but there is no

connection to the paired COM-DEX.

● Flashing green light on the top LED: The device is on and connected

to the COM-DEX, but it is not streaming.

● Constant green light on the top LED: The device is on and streaming.

● Occasionally flashing red light on both LEDs: The battery is low.

Maintenance

● Clean the device with a damp cloth. Do not use any liquids or chemi-

cals and do not immerse in liquids.

● When the device is not in use keep it in a dry location out of reach of

children and pets.

● Never try to open or repair the device yourself. This may only be done

by authorised technicians.

TROUBLESHOOTING

Problem Possible cause Solution

The device does not

work

1. Remote Mic battery

low

2. COM-DEX battery

low

3. Out of range

1. Charge Remote Mic

battery

2. Charge your COM-

DEX

3. Keep the devices in

sight of each other

and in range (up to

10m)

No sound 1. Not paired to COM-

DEX

2. COM-DEX is out of

the hearing aids'

range

3. Hearing aid batter-

ies are low

1. Repeat the pairing

process

2. Move into range

3. Change the hearing

aids' batteries

If the problem persists, contact your hearing care professional. For more

information, visit: www.widex.com.

Warnings

Do not use the device in mines or other areas with explosive gases.

Do not expose to extreme temperatures or high humidity.

When the device is connected via micro USB cable to external mains-

operated equipment such as a charger, PC, audio source or similar, this

equipment must comply with IEC 60065, IEC 60950-1, IEC 60601-1 or

equivalent safety standards.

REGULATORY INFORMATION

Directive 1999/5/EC

Hereby, Widex A/S declares that this COM-DEX Remote Mic is in compli-

ance with the essential requirements and other relevant provisions of Di-

rective 1999/5/EC.

A copy of the Declaration of Conformity can be found at:

www.widex.com/doc

N26346

Information regarding disposal

Do not dispose of hearing aids, hearing aid accessories and batteries with

ordinary household waste.

Hearing aids, batteries and hearing aid accessories should be disposed of

at sites intended for waste electrical and electronic equipment, or given to

your hearing care professional for safe disposal.

SYMBOLS

Symbols commonly used by Widex A/S in medical device labelling (labels/IFU/

etc.)

Symbol Title/Description

Manufacturer

The product is produced by the manufacturer whose name and address

are stated next to the symbol. If appropriate, the date of manufacture

may also be stated.

Catalogue number

The product’s catalogue (item) number.

Consult instructions for use

The user instructions contain important cautionary information

(warnings/precautions) and must be read before using the product.

Warning

Text marked with a warning symbol must be read before using the

product.

WEEE mark

“Not for general waste”. When a product is to be discarded, it must

be sent to a designated collection point for recycling and recovering

to prevent the risk of harm to the environment or human health as a

result of the presence of hazardous substances.

Symbol Title/Description

CE mark

The product is in conformity with the requirements set out in Euro-

pean CE marking directives.

RCM mark

The product complies with electrical safety, EMC and radio spectrum reg-

ulatory requirements for products supplied to the Australian or New Zea-

land market.

Interference

Electromagnetic interference may occur in the vicinity of the prod-

uct.

GERÄTEBESCHREIBUNG - siehe Abb. 1

1.1 Streaming-Taste

1.2 Ein/Aus-Taste

1.3 LED

1.4 Mikrofon und LED

1.5 Ladebuchse

1.6 Clip

Bestimmungsgemäßer Gebrauch

Das COM-DEX Remote Mic ist ein Mikrofon mit integriertem Sender, das

dazu dient, Schall zu einem mit dem/n Hörsystem(en) des Trägers ver-

bundenen COM-DEX zu senden. Das Ziel ist die Verbesserung der Fähig-

keit des Hörgeräteträgers, Sprache in schwierigen Hörsituationen zu ver-

stehen. Für optimale Verbindungsqualität müssen sich das Gerät und

das COM-DEX in Sichtweite voneinander befinden.

HINWEIS

Ihr Remote Mic ist nur für den Betrieb mit einem COM-DEX vorgesehen.

Zubehör - siehe Abb. 2

USB-Kabel

BENUTZUNG DES GERÄTS

AUFLADEN DES GERÄTS - siehe Abb. 3

Schließen Sie das USB-Kabel zwischen Ihrem Gerät und dem Ladegerät

an. Das Aufladen Ihres Geräts dauert etwa 3 Stunden.

HINWEIS

Bevor Sie das Gerät verwenden können, müssen Sie das USB-Kabel trennen.

Akkulaufzeit: 8 Stunden Streaming.

EIN- UND AUSSCHALTEN DES GERÄTS

Einschalten:

● Halten Sie die Ein/Aus-Taste 3 Sekunden lang gedrückt.

Ausschalten:

● Halten Sie die Ein/Aus-Taste 3 Sekunden lang gedrückt.

Das Gerät schaltet sich automatisch aus, wenn für länger als 30 Minuten

kein Streaming erfolgte.

KOPPLUNG DES GERÄTS

Kopplung Ihres Geräts mit Ihrem COM-DEX

Gehen Sie bei der erstmaligen Kopplung Ihres Geräts mit Ihrem COM-DEX

folgendermaßen vor:

1. Achten Sie darauf, dass Ihr COM-DEX im Kopplungsmodus ist.

2. Schalten Sie das Gerät ein. Das Gerät schaltet beim erstmaligen Ein-

schalten in den Kopplungsmodus und verbindet sich automatisch mit

Ihrem COM-DEX. Dies kann einige Minuten dauern.

HINWEIS

Nachdem Sie Ihr Gerät mit Ihrem COM-DEX gekoppelt haben, erhält es

die Kopplung bei und verbindet sich automatisch, wenn Ihr COM-DEX ein-

geschaltet ist.

Das COM-DEX Remote Mic für eine neue Kopplung zurücksetzen:

1. Schalten Sie das Gerät ein.

2. Setzen Sie Ihr Gerät auf die Werkseinstellungen zurück, indem Sie bei-

de Tasten 5 Sekunden lang drücken. Das Gerät schaltet in den Kopp-

lungsmodus.

3. Befolgen Sie das oben beschriebene Kopplungsverfahren.

BENUTZUNG DES GERÄTS - siehe Abb. 4

Entfernen Sie die Schutzfolie, bevor Sie Ihr Gerät benutzen.

Befestigen Sie das Gerät am Hemdkragen der Person, die Sie hören möch-

ten.

Schalten Sie das Gerät ein.

Zum Start/Stopp des Streamings drücken Sie einfach die Streaming-Taste

an Ihrem Remote Mic. Beim Streaming leuchtet die LED grün.

HINWEIS

Wenn Sie Ihr Gerät über die COM-DEX App betreiben möchten, müssen Sie

die App aktualisieren.

Lautstärkeanpassung

Sie können die Streaming-Lautstärke zwischen dem Gerät und dem COM-

DEX in 3 Stufen anpassen. Drücken Sie einfach die Ein/Aus-Taste seitlich

am Gerät, worauf sich die Lautstärke in einem dreistufigen Zyklus ändert

(höchster Pegel – niedrigster Pegel – zurück zum Normalpegel).

Visuelle Anzeigen - siehe Abb. 5

Ihr Gerät hat zwei in unterschiedlichen Farben leuchtende LED. Diese Far-

ben zeigen Ihnen jederzeit die Betriebsart Ihres Geräts an.

● Untere LED leuchtet konstant rot: Das Gerät wird aufgeladen.

● Untere LED leuchtet konstant grün: Das Gerät ist vollständig geladen.

● Beide LEDs blinken blau-rot-blau-rot: Das Gerät ist bereit für die

Kopplung.

● Obere LED blinkt blau: Das Gerät ist eingeschaltet, hat aber keine Ver-

bindung mit dem gekoppelten COM-DEX.

● Obere LED blinkt grün: Das Gerät ist eingeschaltet und mit dem COM-

DEX verbunden, das Streaming funktioniert aber nicht.

● Obere LED leuchtet konstant grün: Das Gerät ist eingeschaltet, das

Streaming funktioniert.

● Beide LEDs blinken gelegentlich rot: Akku schwach

Aufbewahrung und allgemeine Handhabung

● Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie kei-

nerlei Flüssigkeiten oder Chemikalien und tauchen Sie das Gerät nicht

in Flüssigkeiten ein.

● Wenn Sie das Gerät nicht benutzen, bewahren Sie es an einem trocke-

nen Ort und für Kinder und Haustiere unzugänglich auf.

● Versuchen Sie nie, das Gerät selbst zu öffnen bzw. zu reparieren, son-

dern bringen Sie es zu Ihrem Hörgeräte-Akustiker.

FEHLERSUCHE

Problem Mögliche Ursache Lösung

Das Gerät funktioniert

nicht

1. Remote Mic Akku

schwach

2. COM-DEX Akku

schwach

3. Außer Reichweite

1. Remote Mic Akku

aufladen

2. COM-DEX aufladen

3. Die Geräte in Sicht-

weite zueinander

und in Reichweite

(bis 10 m) halten

Kein Ton 1. Keine Kopplung mit

COM-DEX

2. COM-DEX ist außer-

halb der Reichweite

der Hörsysteme

3. Hörsystembatterien

schwach

1. Kopplung wieder-

holen

2. In Reichweite brin-

gen

3. Hörsystem-Batteri-

en wechseln

Besteht das Problem weiterhin, suchen Sie Ihren Hörgeräte-Akustiker auf.

Weitere Informationen finden Sie auf www.widex.com

Warnhinweise

Aufgrund der einschlägigen Vorschriften darf das Gerät nicht in explo-

sionsgefährdeten Räumen betrieben werden (z. B. in Minen oder an an-

deren Orten mit explosiblen Gasen).

Setzen Sie das Gerät keinen extremen Temperaturen oder starker

Feuchtigkeit aus.

Wenn das Gerät über ein Mikro-USB-Kabel mit einem netzbetriebenen

externen Gerät (z. B. Ladegerät, PC, Audiogerät o. Ä.) verbunden wird,

muss dieses Gerät die Sicherheitsvorschriften der Normen IEC 60065,

IEC 60950-1, IEC 60601-1 oder vergleichbarer Normen erfüllen.

INFORMATIONEN ZUR REGELKONFORMITÄT

Richtlinie 1999/5/EG

Hiermit erklärt Widex A/S, dass sich dieses COM-DEX Remote Mic in Über-

einstimmung mit den grundlegenden Anforderungen und den anderen re-

levanten Vorschriften der Richtlinie 1999/5/EG befindet.

Eine Kopie der Konformitätserklärung finden Sie auf:

www.widex.com/doc.

N26346

Informationen zur Entsorgung

Werfen Sie Hörsysteme, Zubehör und Batterien nicht in den Hausmüll.

Hörsysteme, Zubehör und Batterien müssen zur sicheren Entsorgung bei

Sammelstellen für Elektro- und Elektronik-Altgeräte oder bei Ihrem Hör-

geräte-Akustiker abgegeben werden.

SYMBOLE

Gemeinhin von Widex A/S für die Kennzeichnung medizinischer Geräte (auf

Etiketten, in Bedienungsanleitungen etc.) verwendete Symbole:

Symbol Bezeichnung/Beschreibung

Hersteller

Der Name und die Adresse des Herstellers des Produktes stehen ne-

ben dem Symbol. Falls erforderlich kann auch das Herstellungsdatum

angegeben sein.

Bestellnummer

Die Bestellnummer (Artikelnummer) des Produktes.

Bedienungsanleitung beachten

Die Bedienungsanleitung enthält wichtige Warnhinweise und Infor-

mationen zu Vorsichtsmaßnahmen und muss vor Gebrauch des Pro-

duktes gelesen werden.

Warnung

Hinweise mit diesem Symbol müssen vor Gebrauch des Produktes ge-

lesen werden.

EEAG-Kennzeichnung

„Nicht im Hausmüll entsorgen.“

Wenn ein Produkt entsorgt werden soll, muss es zu einer ausgewiese-

nen Sammel- und Recyclingstelle gebracht werden, damit Umwelt

und Gesundheit nicht durch gefährliche Stoffe gefährdet werden.

Symbol Bezeichnung/Beschreibung

CE-Kennzeichnung

Das Produkt befindet sich in Übereinstimmung mit den Anforderun-

gen der europäischen Richtlinien zur CE-Kennzeichnung.

RCM Zeichen

Das Produkt entspricht hinsichtlich der elektromagnetischen Verträg-

lichkeit und des Funkfrequenzspektrums den regulatorischen Anfor-

derungen an Produkte, die für den australischen und neuseeländi-

schen Markt bestimmt sind.

Interferenz

In der Nähe des Produktes können elektromagnetische Interferenzen

auftreten.

DESCRIPTION DE L'APPAREIL - Voir l’illustration

1.1 Bouton de streaming

1.2 Bouton d'alimentation

1.3 Voyant

1.4 Microphone et voyant

1.5 Port de chargement

1.6 Pince

Usage auquel l'appareil est destiné

L'appareil COM-DEX Remote Mic est un microphone avec une radio inté-

grée. Il est conçu pour transmettre le son à un COM-DEX connecté aux ai-

des auditives de l'utilisateur. L'objectif est d'optimiser la capacité de la

personne appareillée à entendre la parole dans des situations d'écoute

difficiles. Pour une connectivité optimale, l'appareil et le COM-DEX doi-

vent être en vue l'un de l'autre.

REMARQUE

Votre Remote Mic est uniquement conçu pour être utilisé avec un COM-DEX.

Les accessoires - voir l’illustration 2

Câble USB

UTILISATION DE VOTRE APPAREIL

Chargement de votre appareil - voir l'illustration 3

Connectez le câble USB à votre appareil et à l'alimentation électrique.

Comptez environ 3 heures pour charger votre appareil.

REMARQUE

Avant d'utiliser l'appareil, vous devez le déconnecter du câble USB.

Durée de vie de la pile : 8 heures de streaming.

ALLUMER ET ÉTEINDRE L'APPAREIL

Pour allumer votre appareil :

● appuyez sur le bouton d'alimentation et maintenez-le enfoncé pen-

dant 3 secondes.

Pour éteindre votre appareil :

● Appuyez sur le bouton d'alimentation et maintenez-le enfoncé pen-

dant 3 secondes.

L'appareil s'éteint automatiquement s'il n'a pas transmis de son pendant

plus de 30 minutes.

APPAIRAGE DE VOTRE APPAREIL

Appairage de votre appareil à votre COM-DEX

Lorsque vous appairez votre appareil à votre COM-DEX pour la première

fois, veuillez suivre ces étapes :

1. Assurez-vous que votre COM-DEX est en mode d'appairage.

2. Allumez votre appareil. La première fois que vous ferez cela, l'appareil

sera mis en mode d'appairage et il se connectera automatiquement à

votre COM-DEX. Cela peut prendre quelques minutes.

REMARQUE

Lorsque vous aurez appairé votre appareil à votre COM-DEX, il restera

ainsi et se connectera automatiquement si votre COM-DEX est allumé.

Réinitialisation du COM-DEX Remote Mic pour un nouvel appairage :

1. Allumez votre appareil.

2. Réinitialisez les réglages d'usine de votre appareil en appuyant sur les

deux boutons pendant 5 secondes. L'appareil sera mis en mode ap-

pairage.

3. L'appareil sera mis en mode appairage.

UTILISATION DE VOTRE APPAREIL - voir l'illustration 4

Enlevez le film protecteur avant d'utiliser votre appareil.

Fixez l'appareil sur le col de la chemise de la personne que vous souhaitez

entendre.

Allumez l'appareil.

Pour démarrer et arrêter le streaming, il vous suffit d'appuyer sur le bou-

ton de streaming de votre Remote Mic. Lors du streaming, le voyant de-

viendra vert.

REMARQUE

Si vous voulez contrôler votre appareil via l'application COM-DEX, vous de-

vrez faire une mise à jour de l'application.

Le réglage du son

Le son qui est transmis de l'appareil au COM-DEX peut être ajusté à 3 ni-

veaux. Il suffit d'appuyer sur le bouton marche/arrêt situé sur le côté de

l'appareil et le niveau sonore sera modifié en trois étapes (niveau le plus

élevé - niveau le plus bas - retour au niveau normal).

Indicateurs visuels - voir l'illustration 5

Votre appareil est doté de deux voyants qui clignotent de différentes cou-

leurs. L'objectif de ces couleurs est de vous informer sur le mode sur le-

quel se trouve votre appareil à tout moment.

● Lumière rouge constante sur le voyant du bas : L'appareil charge.

● Lumière verte constante sur le voyant du bas : L'appareil est totale-

ment chargé.

● Lumière clignotante bleue-rouge-bleue sur les deux voyants : L'appa-

reil est prêt à être appairé.

● Lumière bleue clignotante sur le voyant du haut : L'appareil est allu-

mé, mais n'est pas connecté au COM-DEX appairé.

● Lumière verte clignotante sur le voyant du haut : L'appareil est allumé

et connecté au COM-DEX, mais ne transmet pas.

● Lumière verte constante sur le voyant du haut : L'appareil est allumé

et transmet.

● Lumière rouge clignotante occasionnellement sur les deux voyants :

La pile est épuisée.

L’entretien

● Nettoyez l’appareil avec un chiffon humide. N'utilisez pas de produits

liquides ou de produits chimiques, et ne le plongez pas dans un liqui-

de.

● Lorsque vous n’utilisez pas le dispositif, rangez-le dans un endroit sec,

hors de portée des enfants et des animaux domestiques.

● N'essayez jamais d’ouvrir ou de réparer vous-même le dispositif. Cela

doit être fait par des techniciens agréés uniquement.

PROBLÈMES ET SOLUTIONS

Problème Cause possible Solution

L'appareil ne fonctionne

pas

1. Pile du Remote Mic

faible

2. Pile du COM-DEX

faible

3. Hors de portée

1. Chargez la pile du

Remote Mic

2. Chargez votre

COM-DEX

3. Veillez à ce que les

appareils se voient

et qu'ils se trouvent

à portée l'un de

l'autre (jusqu'à 10

Pas de son 1. Non appairé à

COM-DEX

2. COM-DEX est hors

de portée

3. Les piles de l'aide

auditive sont faibles

1. Recommencez le

processus d'appai-

rage

2. Déplacez-les dans

le champ de portée

3. Changez les piles

des aides auditives

Si le problème persiste, contactez votre audioprothésiste. Pour plus d'in-

formation, veuillez consulter le site www.widex.com

Avertissements

N’utilisez pas l'appareil dans des mines ou d’autres lieux contenant des

gaz explosifs.

Ne l’exposez pas à des températures extrêmes ou à une forte humidité.

Lorsque l'appareil est connecté via un câble micro USB à du matériel

alimenté sur secteur comme un chargeur, un PC, une source audio ou

tout autre appareil semblable, ce matériel doit répondre aux normes

CEI 60065, CEI 60950-1, CEI 60601-1 ou à toute autre norme équivalen-

te.

MENTIONS RÉGLEMENTAIRES

Directive 1999/5/CE

Par le présent, Widex A/S déclare que ce COM-DEX Remote Mic est con-

forme aux exigences essentielles et aux autres dispositions pertinentes de

la directive 1999/5/CE.

Vous trouverez une copie de la déclaration de conformité sur :

www.widex.com/doc.

N26346

Informations concernant la mise au rebut

Ne jetez pas les aides auditives, les accessoires des aides auditives et les

piles avec les ordures ménagères ordinaires.

Les aides auditives, les piles et les accessoires des aides auditives doivent

être jetés dans des sites de collecte des déchets d'équipements électri-

ques et électroniques ou bien déposés chez votre audioprothésiste en vue

de leur élimination en toute sécurité. L'élimination appropriée aide à pro-

téger la santé humaine et l'environnement.

LES SYMBOLES

Les symboles

Symboles communément utilisés par Widex A/S pour l'étiquetage des

dispositifs médicaux (étiquettes/IFU/etc.)

Symbole Titre/Description

Fabricant

Le produit est fabriqué par le fabricant dont le nom et l'adresse

sont mentionnés à côté du symbole. Le cas échéant, la date de

fabrication est également mentionnée.

Référence

La référence du produit.

Consulter le mode d’emploi

Le mode d'emploi comprend d'importantes informations

(avertissements/précautions) qui doivent être lues avant d'uti-

liser le produit.

Avertissement

Les textes indiqués par un symbole d'avertissement doivent

être lus avant d'utiliser le produit.

Symbole Titre/Description

Marquage DEEE

"Ne pas jeter avec les ordures ménagères ordinaires"

Lorsqu'un produit doit être mis au rebut, il doit être envoyé

dans un point de collecte agréé pour le recyclage et la récupé-

ration pour prévenir le risque d'effets nocifs sur l'environne-

ment ou la santé humaine dû à la présence de substances dan-

gereuses.

Marquage CE

Le produit est conforme aux exigences définies dans les direc-

tives européennes sur le marquage CE.

Marquage RCM

Le produit est conforme à la sécurité électrique, aux exigences

réglementaires relatives à la CEM et au spectre radioélectrique

pour les produits destinés au marché australien ou néozélan-

dais.

Interférence

Il peut se produire des interférences électromagnétiques à

proximité du produit.

DESCRIPCIÓN DEL DISPOSITIVO, ver ilustración

1.1 Tecla de transmisión

1.2 Interruptor

1.3 LED

1.4 Micrófono y LED

1.5 Puerto de carga

1.6 Pinza

Utilización prevista

El dispositivo COM-DEX Remote Mic es un micrófono que cuenta con una

radio integrada cuyo objetivo es transmitir el sonido a un COM-DEX co-

nectado al/los audífono(s) del usuario. El objetivo es mejorar la habilidad

del usuario de audífonos de escuchar el habla en situaciones de escucha

difíciles. Para una conectividad óptima, la ayuda COM-DEX y el dispositi-

vo deben estar directamente enfrente el uno del otro.

NOTA

Solo debe utilizar su Remote Mic con una ayuda COM-DEX.

Accesorios, ver ilustración 2

Cable USB

CÓMO UTILIZAR EL DISPOSITIVO

Cómo cargar el dispositivo, ver ilustración 3

Conecte el cable USB al dispositivo y al suministro de energía. La carga del

dispositivo lleva aproximadamente 3 horas.

NOTA

Desconecte el cable USB antes de utilizar el dispositivo.

Vida útil de la pila: 8 horas de transmisión.

Cómo encender y apagar el dipositivo

Para encender el dispositivo:

● pulse y mantenga pulsado el interruptor durante 3 segundos.

Para apagar el dispositivo:

● pulse y mantenga pulsado el interruptor durante 3 segundos.

El dispositivo se apaga automáticamente si no ha estado transmitiendo

sonido durante más de 30 minutos.

Cómo emparejar el dispositivo

Cómo emparejar el dispositivo con la ayuda COM-DEX

Para emparejar el dispositivo con su COM-DEX por primera vez, siga los

pasos siguientes:

1. Compruebe que la ayuda COM-DEX está en el modo de empareja-

miento. Consulte las instrucciones de uso de su COM-DEX.

2. Encienda el dispositivo. La primera vez que lo encienda, el dispositivo

pasará al modo de emparejamiento y se conectará automáticamente

a la ayuda COM-DEX. Este proceso puede durar unos minutos.

NOTA

Una vez emparejados el dispositivo y la ayuda COM-DEX, ambos conser-

varán este ajuste y se conectarán automáticamente al encender su COM-

-DEX.

Cómo reiniciar el dispositivo antes de realizar un emparejamiento nue-

vo:

1. Encienda el dispositivo.

2. Reinicie el dispositivo a los ajustes de fábrica pulsando simultánea-

mente ambas teclas durante 5 segundos. El dispositivo pasará al mo-

do de emparejamiento.

3. Siga el procedimiento de emparejamiento descrito anteriormente.

NOTA

Solo debe utilizar su Remote Mic con una ayuda COM-DEX.

Cómo utilizar el dispositivo, ver ilustración 4

Retire la lámina protectora del dispositivo.

Con la pinza, fije el dispositivo al cuello de la camisa/camiseta de la perso-

na que desea poder escuchar.

Encienda el dispositivo.

Para iniciar y parar la transmisión, pulse la tecla de transmisión de su Re-

mote Mic. Durante la transmisión, el LED mostrará una luz verde.

NOTA

Si desea operar su dispositivo mediante la aplicación COM-DEX, deberá actua-

lizar dicha aplicación.

Cómo ajustar el sonido

Puede ajustar el sonido transmitido por el dispositivo a su COM-DEX en

tres intervalos. Lo único que tiene que hacer es pulsar brevemente el inte-

rruptor situado en uno de los lados del dispositivo. El sonido se ajusta en

un intervalo circular: desde el nivel medio, pasará al más alto y después al

más bajo, para finalmente volver al nivel medio con la tercera pulsación.

Indicadores visuales, ver ilustración 5

Su dispositivo cuenta con dos LEDS que parpadean en colores diferentes.

El objetivo de dichos colores es informarle del modo en el que se encuen-

tra su dispositivo en un momento dado.

● Luz roja constante en el LED inferior: el dispositivo se está cargando.

● Luz verde constante en el LED inferior: el dispositivo está cargado.

● Luz parpadeante roja-azul-roja-azul en ambos LEDS: El dispositivo

está listo para ser emparejado.

● Luz azul parpadeante en el LED superior: el dispositivo está encendi-

do pero no hay conexión con una ayuda COM-DEX emparejada.

● Luz verde parpadeante en el LED superior: el dispositivo está encen-

dido y conectado a una unidad COM-DEX, pero no está transmitiendo.

● Luz verde constante en el LED superior: el dispositivo está encendido

y transmitiendo.

● Luz roja que parpadea ocasionalmente en ambos LEDs: la batería está

agotada.

El mantenimiento del dispositivo

● Limpie el dispositivo con un paño húmedo. No utilice líquidos ni pro-

ductos químicos y no lo sumerja en líquidos.

● Si no está utilizando el dispositivo, manténgalo fuera del alcance de

los niños y las mascotas.

● No desmonte nunca el dispositivo usted mismo. El dispositivo solo de-

ber ser desmontado o reparado por personas autorizadas.

SOLUCIÓN DE PROBLEMAS

Problema Causa posible Solución

El dispositivo no funcio-

1. La batería del Re-

mote Mic está ago-

tada

2. Batería de COM-

-DEX agotada

3. Fuera de radio de

acción

1. Cargue la batería

del Remote Mic

2. Cargue su COM-

-DEX

3. Mantenga los dis-

positivos uno en

frente del otro y

dentro del radio de

acción (hasta 10m)

No hay sonido 1. No está empareja-

do con COM-DEX

2. COM-DEX está fue-

ra del radio de ac-

ción de los audífo-

nos

3. Pilas del audífono

agotadas

1. Vuelva a emparejar

2. Desplácese hasta

estar dentro del ra-

dio de acción

3. Cambie las pilas del

audífono

Si persiste el problema, contacte con su audioprotesista. Para ver más in-

formación, visite: www.widex.com.

ADVERTENCIAS

No utilice el dispositivo en minas o lugares con gases explosivos.

No exponga el dispositivo a temperaturas extremas o a altos niveles de

humedad.

Si conecta el dispositivo mediante el cable USB a un equipo externo co-

nectado a la red eléctrica, como por ejemplo un cargador, ordenador,

fuente de audio o similar, dicho equipo debe cumplir con los requisitos

establecidos en los estándares de seguridad IEC 60065, IEC 60950-1,

IEC 60601-1 o equivalentes.

INFORMACIÓN DE REGLAMENTACIÓN

Directiva 1999/5/EC

Por medio de la presente Widex A/S declara que este COM-DEX Remote

Mic cumple con los requisitos esenciales y cualesquiera otras disposicio-

nes aplicables o exigibles de la Directiva 1999/5/CE.

Puede ver una copia de la Declaración de conformidad en:

www.widex.com/doc.

N26346

Información sobre la eliminación de residuos

No se deshaga de los audífonos, los accesorios para audífonos o las pilas

con los residuos domésticos.

Los audífonos, las pilas y los accesorios para audífonos se deben eliminar

en lugares destinados para la eliminación de residuos de aparatos eléctri-

cos y electrónicos. También puede entregárselos a su audioprotesista para

que éste se encargue de eliminarlos de un modo seguro.

SÍMBOLOS

Éstos son los símbolos utilizados habitualmente por Widex para el etiquetado

de productos sanitarios (etiquetas, instrucciones de uso, etc.)

Símbolo Título/descripción

Fabricante

El producto ha sido producido por el fabricante cuyo nombre y direc-

ción se indican al lado del símbolo. Si procede, también se puede in-

dicar la fecha de fabricación.

Número de catálogo

El número de catálogo del producto (artículo).

Consultar las instrucciones de uso

Las instrucciones de uso contienen información cautelar importante

(avisos/precauciones) y es necesario leerlas antes de utilizar el pro-

ducto.

Aviso

Se debe leer todo texto marcado con un símbolo de advertencia an-

tes de usar el producto.

Marca RAEE

"No tire el dispositivo a la basura". Cuando necesite deshacerse de un

producto, debe enviarlo a lugares de recogida designados para el re-

ciclaje y recuperación, para así evitar dañar el medio ambiente o la

salud humana como causa de la presencia de sustancias peligrosas.

Símbolo Título/descripción

Marca CE

El producto está en conformidad con los requisitos establecidos en

las directivas europeas sobre el marcado CE.

Marca RCM

El producto cumple con los requisitos reguladores de compatibilidad

electromagnética (EMC), seguridad eléctrica y de espectro de radio

establecidos para los productos suministrados a los mercados de

Australia y Nueva Zelanda.

Interferencia

Pueden producirse interferencias electromagnéticas en las zonas ad-

yacentes al producto.

BESKRIVELSE AF ENHEDEN - se illustration 1

1.1 Streamingknap

1.2 Tænd/sluk-knap

1.3 Lysdiode

1.4 Mikrofon og lysdiode

1.5 Opladningsport

1.6 Klips

Påtænkt anvendelse

COM-DEX Remote Mic er en mikrofon med integreret radio til transmissi-

on af lyd til en COM-DEX, der er tilsluttet brugerens høreapparat(er). Må-

let er at forbedre høreapparatbrugerens evne til at høre tale i vanskelige

lyttesituationer. For at opnå optimal konnektivitet skal enheden og

COM-DEX være inden for hinandens synsfelt.

BEMÆRK

Din Remote Mic er kun beregnet til brug sammen med en COM-DEX.

Tilbehør - se illustration 2

USB-kabel

BRUG AF ENHEDEN

Opladning af enheden - se illustration 3

Tilslut USB-kablet til enheden og strømforsyningen. Det tager ca. 3 timer

at oplade enheden.

BEMÆRK

Før du kan bruge enheden, skal USB-kablet frakobles.

Batterilevetid: 8 timers streaming.

Tænd og sluk for enheden

Tænd for enheden:

● Tryk på tænd/sluk-knappen, og hold den nede i 3 sekunder.

Sluk for enheden:

● Tryk på tænd/sluk-knappen, og hold den nede i 3 sekunder.

Enheden slukker automatisk, hvis den ikke har streamet lyd i mere end 30

minutter.

Parring af enheden

Parring af enheden med COM-DEX

Første gang du parrer enheden med COM-DEX, skal du følge disse trin:

1. Sørg for, at COM-DEX er i parringsindstilling.

2. Tænd for enheden. Første gang du gør dette, sættes enheden til par-

ringsindstilling, og den tilsluttes automatisk til COM-DEX. Det kan

tage nogle få minutter.

BEMÆRK

Når du først har parret enheden med COM-DEX, bliver den ved med at

være parret og tilsluttes automatisk, hvis COM-DEX er tændt.

Sådan nulstilles COM-DEX Remote Mic til en ny parring:

1. Tænd for enheden.

2. Nulstil enheden til fabriksindstillinger ved at trykke på begge knapper

i 5 sekunder. Enheden sættes til parringsindstilling.

3. Følg parringsproceduren som beskrevet ovenfor.

Brug af enheden - se illustration 4

Fjern den beskyttende film, før du tager enheden i brug.

Anbring enheden på skjortekraven af den person, du gerne vil høre.

Tænd for enheden.

Streaming startes og stoppes ved at trykke på streamingknappen på Re-

mote Mic. Mens du streamer, lyser lysdioden grønt.

BEMÆRK

Hvis du ønsker at betjene enheden via COM-DEX appen, skal appen opdate-

res.

Lydregulering

Den lyd, der streames fra enheden til COM-DEX, kan justeres i 3 niveauer.

Tryk på tænd/sluk-knappen på siden af enheden for at ændre lydniveauet

i en tretrinscyklus (højeste niveau – laveste niveau – tilbage til normalt

niveau).

Visuelle indikatorer - se illustration 5

Enheden har to lysdioder, der blinker med forskellige farver. Formålet

med disse farver er at informere dig om, hvilken indstilling enheden er i

på ethvert givet tidspunkt.

● Konstant rødt lys fra den nederste lysdiode: Enheden oplader.

● Konstant grønt lys fra den nederste lysdiode: Enheden er fuldt opla-

det.

● Blinkende blåt-rødt-blåt-rødt lys fra begge lysdioder: Enheden er klar

til at blive parret.

● Blinkende blåt lys fra den øverste lysdiode: Enheden er tændt, men

der er ingen forbindelse til den parrede COM-DEX.

● Blinkende grønt lys fra den øverste lysdiode: Enheden er tændt og til-

sluttet COM-DEX, men den streamer ikke.

● Konstant grønt lys fra den øverste lysdiode: Enheden er tændt og

streamer.

● Periodisk blinkende rødt lys fra begge lysdioder: Batteriniveauet er

lavt.

Vedligeholdelse

● Rengør enheden med en fugtig klud. Brug ikke væske eller kemikalier,

og læg den ikke i væske.

● Når enheden ikke er i brug, skal den opbevares på et tørt sted, hvor

børn og kæledyr ikke kan få fat i den.

● Forsøg aldrig selv at åbne eller reparere udstyret. Dette må kun udfø-

res af autoriserede teknikere.

FEJLFINDING

Problem Mulig årsag Løsning

Enheden virker ikke 1. Lavt batteriniveau i

Remote Mic

2. Lavt batteriniveau i

COM-DEX

3. Uden for rækkevid-

1. Oplad batteriet i

Remote Mic

2. Oplad COM-DEX

3. Hold enhederne in-

den for hinandens

synsfelt og inden

for deres rækkevid-

de (op til 10 m)

Ingen lyd 1. Ikke parret med

COM-DEX

2. COM-DEX er uden

for høreapparater-

nes rækkevidde

3. Lavt batteriniveau i

høreapparater

1. Gentag parrings-

processen

2. Stil dig inden for

rækkevidde

3. Udskift batterierne i

høreapparaterne

Hvis problemet stadig er til stede, så kontakt høreklinikken. Flere oplys-

ninger kan fås på www.widex.com

Advarsler

Brug ikke enheden i miner eller andre områder med eksplosive luftar-

ter.

Må ikke udsættes for kraftig varme/kulde eller høj fugtighed.

Når enheden anvendes sammen med udstyr, som er tilsluttet via et mi-

kro-USB-kabel, f.eks. en oplader, en PC, en lydkilde eller lignende, skal

sikkerhedsreglerne for dette udstyr overholdes, som angivet i IEC

60065, IEC 60950-1, IEC 60601-1 eller tilsvarende standarder.

REGULATORISK INFORMATION

Direktiv 1999/5/EF

Undertegnede Widex A/S erklærer herved, at følgende udstyr COM-DEX

Remote Mic overholder de væsentlige krav og øvrige relevante krav i di-

rektiv 1999/5/EF.

En kopi af Overensstemmelseserklæringen kan findes under:

www.widex.com/doc.

N26346

Oplysninger om kassering

Høreapparater, tilbehør og batterier må ikke bortskaffes med det almin-

delige husholdningsaffald.

Høreapparater, batterier og høreapparattilbehør skal bortskaffes på ste-

der, der er tiltænkt affald af elektrisk og elektronisk udstyr, eller afleveres

til din høreklinik til sikker bortskaffelse.

SYMBOLER

Symboler, som ofte anvendes af Widex A/S på pakkematerialet (etiketter,

brugsanvisninger mv.) til medicinsk udstyr

Symbol Titel/beskrivelse

Producent

Sammen med dette symbol angives navn og adresse på den pro-

ducent, der har produceret produktet. Såfremt det er relevant, an-

gives produktionsdatoen også.

Katalognummer

Produktets katalognummer (varenummer)

Se brugsanvisningen

Brugsanvisningen indeholder vigtig sikkerhedsinformation (ad-

varsler/forholdsregler) og skal læses, inden produktet tages i brug.

Advarsel

Tekst markeret med et advarselssymbol skal læses, inden produk-

tet tages i brug.

Symbol Titel/beskrivelse

WEEE-mærke

"Må ikke kasseres som almindeligt affald"

Når produktet skal kasseres, skal det sendes til et autoriseret ind-

samlingssted for genbrug og genanvendelse af elektrisk og elek-

tronisk udstyr for at minimere risikoen for miljøet og for menne-

skers sundhed som følge af tilstedeværelsen af farlige stoffer.

CE-mærke

Produktet overholder kravene i EU-direktiverne for CE-mærket ud-

styr.

RCM-mærke

Produktet overholder de gældende elektriske sikkerhedskrav og

regulatoriske krav til EMC og radiospektrum for produkter, som

distribueres til Australien og New Zealand.

Interferens

Elektromagnetisk interferens kan forekomme i nærheden af pro-

duktet.

DESCRIZIONE DEL DISPOSITIVO - vedi figura 1

1.1 Pulsante di streaming

1.2 Pulsante di accensione

1.3 LED

1.4 Microfono e LED

1.5 Presa di ricarica

1.6 Clip

Uso previsto

Il microfono remoto COM-DEX è un microfono con radio integrata desti-

nato a trasmettere il suono a un COM-DEX collegato all'apparecchio acu-

stico/agli apparecchi acustici dell'utente. L'obiettivo è quello di migliorare

la capacità dell'utente degli apparecchi acustici di sentire il parlato in si-

tuazioni di ascolto difficili. Per una connettività ottimale il dispositivo e il

COM-DEX devono trovarsi all'interno del reciproco campo visivo.

NOTA

Il microfono remoto è destinato esclusivamente ad un utilizzo con un COM-

DEX.

Accessori - vedi figura 2

Cavo USB

USO DEL DISPOSITIVO

RICARICA DEL DISPOSITIVO - vedi figura 3

Collegare il cavo USB al dispositivo e all'alimentazione. Sono necessarie

circa 3 ore per caricare il dispositivo.

NOTA

Prima di poter utilizzare il dispositivo, è necessario disconnettere il cavo USB.

Durata della batteria: 8 ore in streaming.

ACCENSIONE E SPEGNIMENTO DEL DISPOSITIVO

Accensione del dispositivo:

● premere il tasto di accensione e tenerlo premuto per 3 secondi.

Spegnimento del dispositivo:

● premere il pulsante di accensione e tenerlo premuto per 3 secondi.

Il dispositivo si spegne automaticamente se non esegue streaming audio

da più di 30 minuti.

ACCOPPIAMENTO DEL DISPOSITIVO

Accoppiamento del dispositivo al proprio COM-DEX

Per accoppiare il dispositivo al proprio COM-DEX per la prima volta, atte-

nersi alla seguente procedura:

1. Assicurarsi che il COM-DEX sia in modalità di accoppiamento.

2. Accendere il dispositivo. La prima volta che si esegue questa opera-

zione, il dispositivo sarà impostato in modalità di accoppiamento e si

connetterà automaticamente al COM-DEX. Può volerci qualche minu-

to.

NOTA

Una volta accoppiato il dispositivo al COM-DEX, resterà accoppiato e si

connetterà automaticamente se il COM-DEX è acceso.

Reimpostare il microfono remoto COM-DEX per un nuovo accoppiamen-

to:

1. Accendere il dispositivo.

2. Ripristinare il dispositivo alle impostazioni di fabbrica premendo en-

trambi i pulsanti per 5 secondi. Il dispositivo verrà impostato in moda-

lità di accoppiamento.

3. Seguire la procedura di accoppiamento sopra descritta.

USO DEL DISPOSITIVO - vedi figura 4

Rimuovere la pellicola protettiva prima di utilizzare il dispositivo.

Collocare il dispositivo sul colletto della camicia della persona che si vuole

ascoltare.

Accendere il dispositivo.

Per avviare e interrompere lo streaming, basta premere il pulsante di

streaming sul microfono remoto. Durante lo streaming, il LED emette una

luce verde.

NOTA

Se si desidera utilizzare il dispositivo tramite l'app COM-DEX, è necessario ag-

giornare l'app.

Regolazione del suono

Il suono che è trasmesso in streaming dal dispositivo al COM-DEX può es-

sere regolato in 3 livelli. Basta premere il pulsante di accensione sul lato

del dispositivo e il livello sonoro verrà modificato in un ciclo continuo di

tre fasi (livello più alto – livello più basso – ritorno al livello normale).

Indicatori visivi - vedi figura 5

Il dispositivo dispone di due LED che lampeggiano con colori diversi. Lo

scopo di questi colori è di informarvi sulle modalità in cui il dispositivo si

trova in qualsiasi momento.

● Luce rossa fissa sul LED inferiore: Il dispositivo è sotto carica.

● Luce verde fissa sul LED inferiore: Il dispositivo è completamente cari-

co.

● Luce lampeggiante blu-rossa-blu-rossa su entrambi i LED: Il dispositi-

vo è pronto per essere accoppiato.

● Luce blu lampeggiante sul LED superiore: Il dispositivo è acceso, ma

non c'è alcun collegamento con il COM-DEX accoppiato.

● Luce verde lampeggiante sul LED superiore: Il dispositivo è acceso e

collegato al COM-DEX, ma non sta inviando audio in streaming.

● Luce verde fissa sul LED superiore: Il dispositivo è acceso e sta invian-

do audio in streaming.

● Luce rossa lampeggiante occasionalmente su entrambi i LED: La bat-

teria è scarica.

Manutenzione

● Pulire il dispositivo con un panno umido. Non utilizzare liquidi o so-

stanze chimiche e non immergerlo in liquidi.

● Quando il dispositivo non è in uso, tenerlo in un luogo asciutto e fuori

dalla portata dei bambini e degli animali domestici.

● Non tentare mai di aprire o riparare il dispositivo da soli. Rivolgersi

solo a tecnici autorizzati in questi casi.

RISOLUZIONE DI PROBLEMI

Problema Possibile causa Soluzione

Il dispositivo non fun-

ziona

1. Batteria microfono

remoto scarica

2. Batteria COM-DEX

scarica

3. Fuori portata

1. Caricare batteria

microfono remoto

2. Caricare il COM-

DEX

3. Tenere i dispositivi

all'interno del reci-

proco campo visivo

ed entro la portata

(entro 10 m)

Assenza di suono 1. Non accoppiato a

COM-DEX

2. COM-DEX è fuori

della portata degli

apparecchi acustici

3. Le batterie dell'ap-

parecchio acustico

sono scariche

1. Ripetere il processo

di accoppiamento

2. Portarlo entro la

portata

3. Cambiare le batte-

rie degli apparecchi

acustici

Se il problema persiste, contattare il proprio audioprotesista. Per ulteriori

informazioni, visitare: www.widex.com

Avvertenze

Non usare il dispositivo in miniere o altre aree con gas esplosivi.

Non esporre a temperature estreme o alta umidità.

Quando il dispositivo è collegato via cavo micro-USB ad apparecchiatu-

re esterne alimentate da rete elettrica quali un caricabatterie, PC, o si-

mili, tali apparecchiature devono essere conformi a IEC 60065, IEC

60950-1, IEC 60601-1 o norma di sicurezza equivalente.

INFORMAZIONI NORMATIVE

Direttiva 1999/5/CE

Con la presente, Widex A/S dichiara che il presente microfono remoto

COM-DEX è conforme ai requisiti essenziali e ad altre disposizioni conte-

nute nella Direttiva 1999/5/CE.

Una copia della Dichiarazione di conformità è disponibile all'indirizzo:

www.widex.com/doc.

N26346

Informazioni relative allo smaltimento

Non smaltire apparecchi acustici, accessori di apparecchi acustici e batte-

rie insieme ai rifiuti domestici comuni.

Gli apparecchi acustici, le batterie e gli accessori per apparecchi acustici

devono essere smaltiti in siti destinati ad apparecchiature elettriche ed

elettroniche o consegnati all'audioprotesista per uno smaltimento in con-

dizioni di sicurezza. Il corretto smaltimento aiuta a proteggere la salute

umana e l'ambiente.

SIMBOLI

Simboli

Simboli comunemente usati da Widex A/S per l'etichettatura dei dispositi-

vi medici (etichette, istruzioni per l'uso, ecc.)

Simbolo Titolo/Descrizione:

Produttore

Il prodotto è fabbricato dal produttore il cui nome e indirizzo

sono riportati accanto al simbolo. Se del caso, può essere indi-

cata anche la data di fabbricazione.

Numero di catalogo

Numero di catalogo (articolo) del prodotto.

Consultare le istruzioni d'uso

Le istruzioni contengono importanti informazioni cautelative

(avvertenze/precauzioni) e devono essere lette prima di utiliz-

zare il prodotto.

Avvertenza

I testi contrassegnati da un simbolo di avvertenza devono es-

sere letti prima di utilizzare il prodotto.

Simbolo Titolo/Descrizione:

Contrassegno RAEE

"Non per rifiuti generici"

Quando un prodotto è da scartare, deve essere conferito a un

punto di raccolta designato per il riciclaggio e recupero per

prevenire il rischio di danni all'ambiente o alla salute umana a

causa della presenza di sostanze pericolose.

Contrassegno CE

Il prodotto è conforme ai requisiti stabiliti nelle direttive euro-

pee sul marchio CE.

Marchio RCM

Il prodotto è conforme ai requisiti normativi sulla sicurezza

elettrica, di compatibilità elettromagnetica e sullo spettro ra-

dio per i prodotti forniti sui mercati australiano o neozelande-

se.

Interferenza

Interferenze elettromagnetiche possono insorgere in prossimi-

tà del prodotto.

装置の説明 - 図 1 を参照

1.1 ストリーミングボタン

1.2 電源ボタン

1.3 LED

1.4 マイクと LED

1.5 充電ポート

1.6 クリップ

使用目的

COM-DEX Remote Mic は、補聴器に接続された COM-

DEX に音を転送するための無線が統合されたマイクです。

補聴器をお使いの方が、聞き取りにくい状況で話し声を聞

き取りやすくすることを目的としています。本装置と

COM-DEX を最適な状態で接続するためには、両装置が

近くにあることが必要です。

付記

Remote Mic は COM-DEX 専用です。

付属品 - 図 2 を参照

USB ケーブル

装置の使用方法

装置の充電 - 図 3 を参照

USB ケーブルを装置と電源に接続してください。装置の

充電には約 3 時間かかります。

付記

装置を使用する前に、USB ケーブルを取り外してください。

バッテリー駆動時間:ストリーミング時 8 時間。

装置の電源のオン/オフ

装置の電源をオンにするには：

● 電源ボタンを 3 秒間押し続けます。

装置の電源をオフにするには：

● 電源ボタンを 3 秒間押し続けます。

30 分間以上音声のストリーミングがない場合、装置の電源

は自動的にオフに切り換わります。

装置のペアリング

装置と COM-DEX のペアリング

装置を COM-DEX に初めてペアリングする場合には以下

の手順に従ってください:

1. COM-DEX がペアリングモードに設定されていること

を確認します。

2. 装置の電源をオンにします。これを初めて行う場合、装

置はペアリングモードとなり、COM-DEX に自動的に接

続されます。これには数分かかることがあります。

付記

装置と COM-DEX とのペアリングが完了するとペアリン

グモードが維持され、COM-DEX の電源がオンの場合には

COM-DEX に自動的に接続されます。

COM-DEX Remote Mic をリセットして新たにペアリ

ングする場合:

1. 装置の電源をオンにします。

2. 両方のボタンを 5 秒間押し、装置を工場設定にリセット

します。装置はペアリングモードに設定されます。

3. 上記のペアリングの手順にしたがって操作します。

装置の使用方法 - 図 4 を参照

装置の使用前に保護フィルムを取り除きます。

声を聞きたい相手の服の襟元に装置をつけます。

装置の電源をオンにします。

ストリーミングの開始と停止には、Remote Mic のストリ

ーミングボタンを押してください。ストリーミング中、

LED は緑色で点灯します。

付記

装置を COM-DEX アプリで使用する場合、アプリをアップデ

ートする必要があります。

音の調節

装置から COM-DEX へのストリーミング音声は、3 段階で

調節できます。装置側面の電源ボタンを押すと音声レベル

が 3 段階で順に切り替わります（最高レベル-最低レベル-

通常レベルに戻る）。

ライトインジケータ - 図 5 を参照

装置には、異なる色で点滅する 2 つの LED が搭載されてい

ます。色により、装置に設定されているモードが示されま

す。

● 下部の LED が赤色で点灯装置は充電中です。

● 下部の LED が緑色で点灯:装置はフル充電されていま

す。

● 両方の LED が青-赤-青-赤と交互に点滅:装置のペアリン

グが可能です。

● 上部の LED が青色で点滅:装置の電源はオンになってい

ますが、ペアリングする COM-DEX には接続されてい

ません。

● 上部の LED が緑色で点滅:装置の電源はオンで COM-

DEX に接続されていますが、ストリーミングは行われて

いません。

● 上部の LED が緑色で点灯:装置の電源はオンでストリー

ミングが行われています。

● 両方の LED が時折赤色で点滅:バッテリーが少なくなっ

ています。

メンテナンス

● 装置は湿った布できれいにしてください。液体や化学

品を使用したり、液体に浸さないでください。

● 装置を使用しない場合は、子供およびペットの手の届か

ない乾燥した場所に保管してください。

● 絶対にご自分で分解、または修理しようとしないでくだ

さい。認定技術者のみが実施します。

トラブルシューティング

問題点考えられる要因解決策

装置が作動しない 1. Remote Mic の

バッテリーレベ

ル低下

2. COM-DEX のバ

ッテリーレベル

低下

3. 通信範囲外

1. Remote Mic の

バッテリーを充

電します

2. COM-DEX のバ

ッテリーを充電

します

3. 両方の装置を近

くに置きます

（最高 10m）

音が出ない 1. COM-DEX とペ

アリングされな

い

2. COM-DEX が補

聴器の通信範囲

外にある

3. 補聴器のバッテ

リーレベル低下

1. ペアリングの手

順を繰り返しま

す

2. 通信範囲に移動

します

3. 補聴器のバッテ

リーを交換しま

す

問題が解決しない場合は販売店にご相談ください。詳細は

ウェブサイトをご覧ください: www.widex.com

警告

鉱山などの爆発性ガスが存在する可能性がある区域では

装置を使用しないでください。

極度の高温または高い湿度にさらさないでください。

マイクロ USB ケーブルで装置を充電器、PC、音源、そ

の他の外部装置に接続する場合、この装置は IEC 60065、

IEC 60950-1、IEC 60601-1 または同等の安全規格に遵

守している必要があります。

規制情報

指令 1999/5/EC

ここに、Widex A/S は、この COM-DEX Remote Mic が指

令 1999/5/EC の基本的要件およびその他の関連規定に準

拠していることを宣言します。

適合宣言のコピーを以下に掲載します。

www.widex.com/doc

N26346

処分に関する情報

補聴器やその付属品、電池を通常の廃棄物として処分しな

いでください。

補聴器やその付属品、電池については、地区の定める電気・

電化製品の処分方法に従って処分するか、購入元へ処分を

依頼してください。

記号

ワイデックス株式会社が製造販売する管理医療機器の表示（ラ

ベルや取扱説明書など）に共通して使用される記号

記号タイトル/説明

製造元

製品の製造者名、製造所の所在地。製造年月も記載さ

れる場合があります。

カタログ番号

製品のカタログ（品目）番号

取扱説明書を参照

取扱説明書には安全に関する重要なお知らせ（重要/注

意）が記載されていますので、製品のご使用前に必ず

お読みください。

警告

警告記号を伴う事項は、製品のご使用前に必ずお読み

ください。

WEEE マーク

「一般廃棄物ではありません」製品の廃棄については、

危険物質があるために環境や人の健康を害するリスク

を防ぐため、指定されたリサイクル・回収場所に廃棄

してください。

記号タイトル/説明

CE マーク

製品は、CE マークに関する欧州指令によって定められ

た要件に適合しています。

RCM マーク

製品は、オーストラリアとニュージーランド市場に供

給される製品に対する電気安全、EMC、無線スペクト

ル規制要件に準拠しています。

電磁波による干渉

製品の近くでは電磁波による干渉が起きる可能性があ

ります。

DESCRIPTION OF DEVICE - see illustration 1

1.1 Streaming button

1.2 Power button

1.3 LED

1.4 Microphone and LED

1.5 Charging port

1.6 Clip

Intended use

The COM-DEX Remote Mic device is a microphone with an integrated ra-

dio intended for transmitting sound to a COM-DEX connected to the user’s

hearing aid(s). The aim is to improve the hearing aid user’s ability to hear

speech in difficult listening situations. For optimal connectivity the device

and the COM-DEX must be within sight of each other.

NOTE

Your Remote Mic is only intended to be used with a COM-DEX.

Accessories - see illustration 2

USB cable

USING YOUR DEVICE

Charging your device - see illustration 3

Connect the USB cable to your device and the power supply. It takes ap-

proximately 3 hours to charge your device.

NOTE

Before you can use the device, you must disconnect the USB cable.

Battery life: 8 hours streaming, 8 days standby.

Turning the device on and off

To turn on your device:

● Press the power button and keep it pressed for 3 seconds.

To turn off your device:

● Press the power button and keep it pressed for 3 seconds.

The device turns off automatically if it has not been streaming sound for

more than 30 minutes.

Pairing your device

Pairing your device to your COM-DEX

To pair your device to your COM-DEX for the first time, follow these steps:

1. Make sure that your COM-DEX is in pairing mode. Consult the COM-

DEX user guide.

2. Turn on your device. The first time you do this, the device will be set

in pairing mode and it will automatically connect to your COM-DEX.

This can take a few minutes.

NOTE

Once you have paired your device to your COM-DEX, it will remain so and

will connect automatically if your COM-DEX is on.

Resetting the COM-DEX Remote Mic for a new pairing:

1. Turn on your device.

2. Reset your device to factory settings by pushing both buttons for 5

seconds. The device will be set to pairing mode.

3. Follow the pairing procedure described above.

Using the device - see illustration 4

Remove the protective film before using your device.

Place the device on the shirt collar of the person you'd like to hear.

Turn on the device.

To start and stop streaming, simply push the streaming button on your

Remote Mic. While streaming, the LED will show a green light.

NOTE

If you want to operate your device via the COM-DEX app, you'll need to up-

date the app.

Sound adjustment

The sound that is streamed from the device to COM-DEX can be adjusted

in 3 levels. Simply push the power button on the side of the device and

the sound level will be altered in a three step circle (highest level – lowest

level – back to normal level).

Visual indicators - see illustration 5

Your device has two LEDs that flash with different colors. The purpose of

these colors is to inform you of which mode your device is in at any given

time.

● Constant red light on the bottom LED: The device is charging.

● Constant green light on the bottom LED: The device is fully charged.

● Flashing blue-red-blue-red light on both LEDS: The device is ready to

be paired.

● Flashing blue light on the top LED: The device is on, but there is no

connection to the paired COM-DEX.

● Flashing green light on the top LED: The device is on and connected

to the COM-DEX, but it is not streaming.

● Constant green light on the top LED: The device is on and streaming.

● Occasionally flashing red light on both LEDs: The battery is low.

Maintenance

● Clean the device with a damp cloth. Do not use any liquids or chemi-

cals. Do not immerse in liquids.

● When the device is not in use keep it in a dry location out of reach of

children and pets.

● Never try to open or repair the device yourself. This may only be done

by authorized technicians.

TROUBLESHOOTING

Problem Possible cause Solution

The device does not

work

1. Remote Mic battery

low

2. COM-DEX battery

low

3. Out of range

1. Charge Remote Mic

battery

2. Charge your COM-

DEX

3. Keep the devices in

sight of each other

and in range (10m/

33ft)

No sound 1. Not paired to COM-

DEX

2. COM-DEX is out of

the hearing aids'

range

3. Hearing aid batter-

ies are low

1. Repeat the pairing

process

2. Move into range

3. Change the hearing

aids' batteries

If the problem persists, contact your hearing care professional. For more

information, visit: www.widex.com.

Warnings

Do not use the device in mines or other areas with explosive gases.

Do not expose to extreme temperatures or high humidity.

When the device is connected via micro USB cable to external mains-

operated equipment such as a charger, PC, audio source or similar, this

equipment must comply with IEC 60065, IEC 60950-1, IEC 60601-1 or

equivalent safety standards.

REGULATORY INFORMATION

The following Table summarizes the technical details of the Bluetooth and

WidexLink technology as it is implemented in the COM-DEX Remote Mic.

Unit COM-DEX Remote Mic Hearing aid

Type Bluetooth* W-link

Antenna type Embedded ceramic an-

tenna

Inductive antenna

Antenna dimensions NA Ø1 .8 mm

L – 4 .85mm

Modulation FHSS/GFSK,

π/4 DPSK,

8DPSK

FSK

Magnetic Field Strength NA -54dBμA/m at

10m distance

Output power 2.5 mW EIRP

+4dBm

29pW EIRP**

-75 dBm

Range <10m between COM-

DEX Remote Mic and

Bluetooth device

<1m remote unit to

hearing aid

<30cm be- tween hear-

ing aids

Center frequency 2 .45GHz ISM 10.6MHz

Unit COM-DEX Remote Mic Hearing aid

Channels 80 channels Single channel radio

Bandwidth 1MHz 660kHz (-15dB)

Duty Cycle *** < 100 % < 5 %

Data rate 3 Mbit/s 212kbit/s raw channel

capacity

Data flow Time division duplex

(TDD)

Simplex or semiduplex

Protocol Packet based protocol,

time divided

Random access

– no collision avoidance

* Bluetooth specification v 4.1 + EDR/LE published by the Bluetooth Spe-

cial Interest Group (SIG)

** EIRP = Equivalent isotropically radiated power

*** Duty Cycle averaged over 1 hour of operation

Cables and transducers:

The COM-DEX Remote Mic is using a micro USB cable for charging.

Guidance and manufacturer’s declaration

Electromagnetic emissions The COM-DEX Remote Mic is intended for use

in the electromagnetic environment specified below. The customer or the

user of a COM-DEX Remote Mic should assure that it is used in such an

environment.

Emissions test Compliance Electromagnetic envi-

ronment

- guidance

RF emissions

CISPR 11

Group 1 The COM-DEX Remote

Mic uses RF energy only

for its internal function.

Therefore, its RF emis-

sions are very low and

are not likely to cause

any interference in

nearby electronic

equipment.

RF emissions

CISPR 11

Class B The COM-DEX Remote

Mic is suitable for use in

all establishments, in-

cluding domestic estab-

lishments and those di-

rectly connected to the

public low-voltage

power supply network

Harmonic emissions

IEC

61000-3-2

Not

applicable *)

Emissions test Compliance Electromagnetic envi-

ronment

- guidance

Voltage fluctuations/

flicker emissions

IEC

61000-3-3

Not

applicable *)

that supplies buildings

used for domestic pur-

poses.

*) Battery powered equipment

Electromagnetic immunity

The COM-DEX Remote Mic is intended for use in the electromagnetic envi-

ronment specified below. The customer or the user of a COM-DEX Remote

Mic should assure that it is used in such an environment.

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Electro-static dis-

charge (ESD)

IEC

61000-4-2

± 6 kV contact

± 8 kV air

± 6 kV contact

± 8 kV air

Floors should be

wood, concrete

or ceramic tile. If

floors are cov-

ered with syn-

thetic material,

the relative hu-

midity should be

at least 30 %.

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Electrical fast

transients/burst

IEC

61000-4-4

± 2 kV for power

line supplies

± 1 kV for input/

output lines

Not

applicable *)

Not applicable *)

Not

applicable *)

Surge

IEC

61000-4-5

± 1 kV line(s) to

line(s)

± 2 kV line(s) to

earth

Not

applicable *)

Not

applicable *)

Not

applicable *)

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Voltage dips,

short interrup-

tions and voltage

variations on

power supply in-

put lines

IEC

61000-4-11

<5 % UT

(>95 % dip

in UT) for

0.5 cycle

40 % UT

(60 % dip

in UT) for 5 cycles

70 % UT

(30 % dip

in UT) for 25 cy-

cles

<5 % UT

(>95 % dip

in UT) for 5 s

Not

applicable *)

Not

applicable *)

Power frequency

(50/60 Hz) mag-

netic field

IEC

61000-4-8

3 A/m 3 A/m Power frequency

magnetic fields

should be at lev-

els characteristic

of a typical loca-

tion in a typical

commercial or

hospital environ-

ment

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

NOTE UT is the a.c. mains voltage prior to the application of the test level.

*) Battery powered equipment

Electromagnetic immunity – cont.

The COM-DEX Remote Mic is intended for use in the electromagnetic envi-

ronment specified below. The customer or the user of a COM-DEX Remote

Mic should assure that it is used in such an environment.

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Portable and mo-

bile RF communi-

cations equip-

ment should be

used no closer to

any part of the

COM-DEX Re-

mote Mic, includ-

ing cables, than

the recommen-

ded separation

distance calcula-

ted from the

equation applica-

ble to the fre-

quency of the

transmitter.

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Conducted RF

IEC

61000-4-6

3 Vrms

150 kHz to 80

MHz

3 Vrms

Recommended

separation dis-

tance

d = 1.2 √P

Radiated RF

IEC

61000-4-3

3 V/m

80 MHz to 2.5

GHz

3 V/m d = 1.2 √P

80 MHz to 800

MHz

d = 2.3 √P

800 MHz to 2.5

GHz

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Where P is the

maximum output

power rating of

the transmitter in

watts (W) ac-

cording to the

transmitter man-

ufacturer and d is

the recommen-

ded separation

distance in me-

tres (m).

Field strengths

from fixed RF

transmitters, as

determined by an

electromagnetic

site survey a,

should be less

than the compli-

ance level in each

frequency range

Immunity Test IEC 60601

Test level

Compliance level Electromagnetic

environment

– guidance

Interference may

occur in the vicin-

ity of equipment

marked with the

following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures, ob-

jects and people.

a. Field strengths from fixed transmitters, such as base stations for radio

(cellular/cordless) telephones and land mobile radios, amateur radio, AM

and FM radio broadcast and TV broadcast cannot be predicted theoreti-

cally with accuracy. To assess the electromagnetic environment due to

fixed RF transmitters, an electromagnetic site survey should be consid-

ered. If the measured field strength in the location in which the COM-DEX

Remote Mic is used exceeds the applicable RF compliance level above,

the COM-DEX Remote Mic should be observed to verify normal operation.

If abnormal performance is observed, additional measures may be neces-

sary, such as re-orienting or re-locating the COM-DEX Remote Mic.

b. Over the frequency range 150 kHz to 80 MHz, field strengths should be

less than 3 V/m.

Recommended separation distances

Recommended separation distances between portable and mobile RF

communication equipment and the COM-DEX Remote Mic.

The COM-DEX Remote Mic is intended for use in the electromagnetic envi-

ronment in which RF disturbances are controlled. The customer or the

user of the COM-DEX Remote Mic can help prevent electromagnetic inter-

ference by maintaining a minimum distance between portable and mobile

RF communications equipment (transmitters) and the COM-DEX Remote

Mic as recommended below, according to the maximum output power of

the communications equipment.

Rated maximum

output power of

transmitter

Separation distance according

to frequency of transmitter

150 kHz to 80

MHz

d = 1.2 √P

80 MHz to 800

MHz

d = 1.2 √P

800 MHz to

2.5 GHz

d = 2.3 √P

0.01

0.12 0.12 0.23

0.1 0.38 0.38 0.73

1 1.2 1.2 2.3

10 3.8 3.8 7.3

100 12 12 23

Rated maximum

output power of

transmitter

Separation distance according

to frequency of transmitter

For transmitters rated at a maximum output power not listed above, the

recommended separation distance d in metres (m) can be estimated us-

ing the equation applicable to the frequency of the transmitter, where P

is the maximum output power rating of the transmitter in watts (W) ac-

cording to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures, ob-

jects and people.

This COM-DEX Remote Mic may be interfered with by other equipment

even if that other equipment complies with CISPR emission requirements.

EMC/EMI Compliance

The COM-DEX Remote Mic complies with the following EMC/EMI stand-

ards:

Standard

Test type Note

47 CFR Part 15, subpart

RF emissions USA Federal Communi-

cations Commission

(FCC) requirements to

intentional radiators.

Standard Test type Note

EN 300 328 V1.9.1 RF emissions incl. Spu-

rious emission

EMC and radio spec-

trum matters for data

transmission systems in

the 2.4 GHz ISM band

and using wide band

modulation techniques

IEC 60601-1-2:2007 EMC emission

Immunity, RF and ESD

Medical electrical

equipment.

General requirements

for basic safety and es-

sential performance.

Electromagnetic com-

patibility.

EN 301

489-17 V2.2.1

Immunity, RF and ESD Standard for Broad-

band Data Transmission

Systems in the frequen-

cy range 9 kHz – 40

GHz

Directive 1999/5/EC

Hereby, Widex A/S declares that this COM-DEX Remote Mic is in compli-

ance with the essential requirements and other relevant provisions of Di-

rective 1999/5/EC.

A copy of the Declaration of Conformity can be found at:

www.widex.com/doc.

N26346

Information regarding disposal

Do not dispose of hearing aids, hearing aid accessories and batteries with

ordinary household waste.

Hearing aids, batteries and hearing aid accessories should be disposed of

at sites intended for waste electrical and electronic equipment, or given to

your hearing care professional for safe disposal.

SYMBOLS

Symbols commonly used by Widex A/S in medical device labelling (labels/IFU/

etc.)

Symbol Title/Description

Manufacturer

The product is produced by the manufacturer whose name and ad-

dress are stated next to the symbol. If appropriate, the date of

manufacture may also be stated.

Catalog number

The product’s catalog (item) number.

Consult instructions for use

The user instructions contain important cautionary information

(warnings/precautions) and must be read before using the prod-

uct.

Warning

Text marked with a warning symbol must be read before using the

product.

Symbol Title/Description

WEEE mark

“Not for general waste”

When a product is to be discarded, it must be sent to a designated

collection point for recycling and recovering to prevent the risk of

harm to the environment or human health as a result of the pres-

ence of hazardous substances.

CE mark

The product is in conformity with the requirements set out in Euro-

pean CE marking directives.

RCM mark

The product complies with electrical safety, EMC and radio spec-

trum regulatory requirements for products supplied to the Austral-

ian or New Zealand market.

Interference

Electromagnetic interference may occur in the vicinity of the prod-

uct.

FCC AND IC STATEMENTS

FCC ID: TTY-CDRM

IC: 5676B-CDRM

Federal Communications Commission Statement

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accord-

ance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

NOTE:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Changes or modifications to the equipment not expressly approved by

Widex could void the user’s authority to operate the equipment.

Industry Canada Statement / Déclaration d’industrie Canada

Under Industry Canada regulations, this radio transmitter may only oper-

ate using an antenna of a type and maximum (or lesser) gain approved

for the transmitter by Industry Canada.

To reduce potential radio interference to other users, the antenna type

and its gain should be so chosen that the equivalent isotropically radiated

power (e.i.r.p.) is not more than that necessary for successful communica-

tion.

This device complies with Industry Canada licence-exempt RSS stand-

ard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that

may cause undesired operation of the device.

Conformément à la réglementation d’Industrie Canada, le présent émet-

teur radio peut fonctionner avec une antenne d’un type et d’un gain maxi-

mal (ou inférieur) approuvé pour l’émetteur par Industrie Canada.

Dans le but de réduire les risques de brouillage radioélectrique à l’inten-

tion des autres utilisateurs, il faut choisir le type d’antenne et son gain de

sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse

pas l’intensité nécessaire à l’établissement d’une communication satisfai-

sante.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonc-

tionnement.

WIDEX A/S Nymoellevej 6, DK-3540 Lynge, Denmark

www.widex.com

Manual no.:

9 514 0380 080 #02

Issue:

2016-09

9 514 0380 080 #02

10 m. / 30 ft.

COM-DEX Remote Mic

COM-DEX

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Widex Com-Dex Remote Mic in the language / languages: English, German, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Widex Com-Dex Remote Mic Manual

Product: