727518

Whynter RPD-501WP Manual

8
Zoom out
Zoom in
Previous page
1/19
Next page
8
PARTS AND CONTROLS
Energy Saver
When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid
high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or
shut off intermittently depending on the RH% and set humidity.
7. Timer Button
Press to activate the Timer delay feature, in conjunction with the Down and Up Buttons.
Timer Delay Switch Off
When the appliance is ON, press the Timer button to activate Auto-stop function and the Timer OFF
light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons. The
time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switch-
es off. To cancel the delayed switch off function, set the time to “00” or turn off the appliance.
Timer Delay Switch On
When the appliance is OFF, press the Timer button to activate Auto-start function and Timer ON light
will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. The time
increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance turns on. To
cancel the delayed switch on function, set the time to “00” or turn off the appliance.
Timer Delay Switch On and Off Sequence
When the appliance is OFF, press the Timer button to activate Auto-start function and Timer light ON
will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. Once Timer
Delay Switch On is placed, press the Timer button again to activate Auto-stop function and the Timer
OFF light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons.
When the delay time set has elapsed, the appliance switches off. To cancel the delayed switch off func-
tion, set the time to “00” or turn off the appliance.
Bucket Full Indicator
The appliance will run continuously until the set RH% is reached or when the drain bucket is full. When the drain
bucket is full, the Full indicator light will illuminate and the dehumidifier will stop operating. Remove the water in the
bucket with two hands, then place the drain bucket back to it's proper position and the machine will start operating
again.
NOTE: The Full Indicator light will be off even if the water is full in Water Pump Drain Method. See page 13.
Auto Defrost Indicator
In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run
until the frost is evaporated. This happens when the appliance is operating in low temperatures (less than 53°F or
12°C), which affects the efficiency of the dehumidifier. When this happens, the Auto Defrost light will turn on and
the machine will go into periodic defrost mode automatically. Defrost time may vary. If the dehumidifier freezes up,
turn the appliance off for few hours and then restart. The appliance will not operate satisfactorily if the room tem-
perature is below 41°F
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter RPD-501WP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter RPD-501WP in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info