643515
9
Zoom out
Zoom in
Previous page
1/14
Next page
9
Operation and Controls
It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C)
and below 90°F (32°C). If the ambient temperature is above or below recommended temperatures, the per-
formance may be affected. For example, placing your appliance in extreme cold or hot conditions may cause
interior temperatures to fluctuate.
SETTING THE TEMPERATURE
To control the internal temperature, turn the temperature
control dial inside the appliance. The temperature range
is from "0” to “7”, where “7” is the coldest temperature
setting and “0” is the warmest temperature setting.
INTERIOR LIGHT
To turn on/ off the interior light, flip the switch inside the
appliance.
INTERNAL FAN
This beverage refrigerator is equipped with an internal fan
that prevents uneven temperature distribution, ensuring
all of your beverage reaches your desired temperature .
PARTS:
1. Temperature Control
2. Light Switch
3. Interior Light
4. Internal Fan
REVERSING THE DOOR SWING
Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the beverage
refrigerator from power.
To remove the door:
1. Using a flathead screw driver carefully pry the top hinge
cover off.
2. Using a Phillips screwdriver, remove the screws and take
off top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a
Phillips head screwdriver.
To install the door:
1. Using a flathead screwdriver, remove the plugs and cov-
er from the opposite cabinet top corner and from the door.
Set aside.
2. Install the bottom hinge at the opposite side corner and
fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top
hinge.
5. Push the plugs and covers into the corresponding holes.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter BR-091WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter BR-091WS in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info