727499
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from the remote con-
trol to the air conditioner, point the front part of the remote handset towards the control panel on the air condi-
tioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approxi-
mately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control
and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by
sliding if off. Strictly adhere to the polarity signs on the bottom of the battery
housing, close the flap once the batteries have been inserted.
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote
control
Always change both batteries at the same time
INDICATOR FUNCTION
1 – Mode Indicator
Displays the current selected mode
(Auto, Cool, Dry, or Fan)
2 – Transmission Indi-
cator
Displays when remote sends signal to
unit
3 – ON/OFF Display
Displays when the unit is turned on, and
disappears when it is turned off
4 – Timer On Indicator Displays when TIMER ON is set
5 – Timer Off Indicator Displays when TIMER OFF is set
6 – Battery Indicator Displays battery life status
7 – Temperature/Timer
display
Displays the set temperature by default,
or timer setting when using TIMER ON/
OFF functions
8 – Sleep Display
Displays when SLEEP function is activat-
ed
9 – Fan Speed Display
Displays selected Fan speed. This display
is blank when set to AUTO speed.
BUTTONS FUNCTION
10 – On/Off Button Turns the unit On and Off
11 – Mode Button
Controls the 4 function modes:
Auto, Cool, Dry, & Fan
12 – Fan Speed Button
Controls the fan speeds: High, Medium,
Low or Auto
13 – Sleep Button Enables Sleep mode
14 – Swing Button
Starts or stops louver movement and
set louver angle.
15 – LED Display But-
ton
Turns on and off the display light
16 Up Button Increases set temperature/time
17 – Down Button Decreases set temperature/time
18 – Shortcut Button
Restore the current settings or resume
previous settings
19 – Timer On Button Enables the Timer On
20 – Timer Off Button Enables the Timer Off
5
6
4 3 2
1
7
8
9
10
11
12
13 14 15
16
17
18
19
20
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-126MD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-126MD in the language / languages: English as an attachment in your email.

The manual is 13,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info