Manual Whynter ARC-126MD (page 10 of 18) (English)

727499

Zoom out

Zoom in

1/18

INSTALLATION

LOCATION

The air conditioner should be placed on a hard and level surface strong enough to support the unit. The unit has

casters and it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not

attempt to roll the unit over objects. Never place any obstacles around the air inlet or outlet and allow at least 20 inch

of clearance for efficient air-conditioning.

EXHAUST AND INTAKE HOSE INSTALLATION

When you use this air conditioner unit, hot air must be exhausted

out of the room to complete the air exchange of the condenser.

When the unit is operating in DRY or FAN only mode, installation

of the exhaust hose is optional.

1. Pull out about 6” of each end of the exhaust and intake hose.

2. Snap each of the hose connectors to the unit onto one end of

each hose and then snap each of the hose connectors to the

window onto the other ends. See Fig. 1

3. Line-up the hose connector hooks of each hose onto the back

of the unit and slide into the hole seats. See Fig. 2

4. Only extend the exhaust hose to the necessary length keeping

it as short and straight as possible.

WINDOW KIT INSTALLATION

The window kit has been designed to fit most standard vertical and horizontal windows. However, it may be

necessary to modify the installation procedures to accommodate your window. Please refer to Fig. 3a and Fig. 3b

for minimum and maximum window openings. If your window opening is less than the mentioned minimum length

of the window slider kit, the window slider kit can be cut to fit the window opening. Never cut into the exhaust/

intake hose cut-outs on the window slider kit.

If your window opening is larger than the maximum length of the window slider kit, additional material will be

needed to cover the open space such as, Plexiglas, PVC plastic, ply wood, etc. Alternately, an additional window

slider kit can be purchased to be used in combination with the included kit.

NOTE: When using the window slider kit on a window or sliding door, additional security measures may be needed.

The window slide bars can be fixed with the clear plastic bolt. Fig. 4.

Fig. 2

Hole Seat

Fig.3a

Fig. 4

Fig.3b

Fig. 1

Hook

Clear plastic

plug

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-126MD in the language / languages: English as an attachment in your email.

The manual is 13,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whynter ARC-126MD Manual

Product: