643504
16
Zoom out
Zoom in
Previous page
1/21
Next page
16 | P a g e
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from
the remote control to the air conditioner, point the front part of the remote handset towards the
control panel on the air conditioner. Reception of the signal is confirmed by a beep. The
maximum signal transmission distance is approximately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.),
may cause interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the
remote control and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
Always change both batteries at the same time
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly
adhere to the polarity signs on the bottom of the battery housing, close the flap once the batteries
have been inserted.
INDICATOR FUNCTION
1 – Mode Indicator
Displays the current selected mode
(Auto, Cool, Dry or Fan)
2 – Lock Indicator Indicates unit is on Lock mode
3 – Temp./Timer Display Displays temperature or timer setting
4 – Fan (High) Displays the selected high fan speed
5 – Fan (Low) Displays the selected low fan speed
6 – Timer Indicator Indicates Timer mode activated
7 – Up Button Increases set temperature/time
BUTTONS FUNCTION
8 – Down Button Decreases set temperature/time
9 – Mode Button
Controls the 4 function modes:
Auto, Cool, Dry & Fan
10 – On/Off Button Turns the unit On and Off
11 – Fan Speed Button
Controls the 3 fan speeds: High & Low
or Auto
12 – Sleep Button Enables Sleep mode
13 – Timer On Button Enables the On timer & set timer hours
14 – Reset Button Cancels all settings
15 – Timer Off Button Enables the Off timer & set timer hours
16 – Lock Button Locks all settings
17 – LED Display Button Turns on and off the display light
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whynter ARC-08WB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whynter ARC-08WB in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info