615125
19
Zoom out
Zoom in
Previous page
1/29
Next page
SIPHON PLUG
Pull out the detergent drawer. Remove the siphon plug and clean the
residues of the softener thoroughly. Fit the cleaned siphon plug in its location.
Check it is fitted properly.
Siphon plug
THE CABINET
Clean the exterior surface of the cabinet of your machine with lukewarm water
and a cleaning substance that will not damage the cabinet. After rinsing with
clean water, wipe it with a soft and dry cloth.
WARNING!
If the machine is installed in a location where the ambient temperature can fall
below 0 C, ensure the following procedure is used when it is not in use:
Plug in the machine.
Close the water tap and pull out the water inlet hose or hoses from
the tap.
Place the ends of the water drain and water inlet hoses in a cup on
the ground.
Adjust the program knob to “Draining” program.
The program ready light will be on.
Run the program by pressing the start/pause button.
Unplug your machine when the program is over (program end light is
on).
When you complete these processes, the remaining water inside the machine
will be drained and thus formation of ice in the machine will be prevented.
When you operate your machine again, be sure that the ambient temperature
is above 0 C.
THE DRUM
Do not leave metal items like needles, staples or coins inside your machine.
These pieces cause rust stains in the drum. To eliminate these stains, use a
suitable cleaning substance and follow the recommendations of the cleaning
substance producer. When cleaning rust stains, never use scouring pads or
similar rough objects.
LIMESCALE REMOVAL
If you use the correct amount of the detergent, there will be no need for lime
removal. However, if you wish to remove limescale, use the lime protectors in
the market and pay attention to their warnings.
WARNING!
The lime eliminating substances contain acids and this may cause colour
modifications in your clothes along with an adverse effect on your machine.
18
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight WK1400Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight WK1400Y in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info