615125
4
Zoom out
Zoom in
Previous page
1/29
Next page
If you plan not to use your machine for a long time, unplug it, shut off
the water supply, and leave the door open in order to keep the inside
of the machine dry and to prevent unpleasant odours in the drum.
As a result of our quality control procedures, a certain amount of
water may remain in your machine from testing. This is not harmful
for your machine and is perfectly normal.
SECTION 2: INSTALLATION
Please pay attention to the following issues before using your washing
machine for the first time.
REMOVAL OF TRANSPORTATION SCREWS
Transportation screws, which are located at the back side of the
machine, must be removed before running the machine.
Loosen the screws by turning them anticlockwise with a suitable
spanner. (DIAGRAM-1)
Pull out the screws and rubber washers .(DIAGRAM-2)
The holes where the transport screws have been removed should be
covered with the plastic transport caps found in the accessories bag.
(DIAGRAM-3)
The transportation screws that have been removed from the machine
must be re-used in any future transporting of the machine.
DIAGRAM-2
DIAGRAM-1 DIAGRAM-3
FOOT ADJUSTMENT
Do not install your machine on rugs or similar surfaces.
For your machine to work silently and without any vibration, it should
be installed on a flat, non-slippery firm surface. Any suspended floor
must be suitably strengthened.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight WK1400Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight WK1400Y in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info