484215
24
Zoom out
Zoom in
Previous page
1/25
Next page
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more int ensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rear range the items so that the sp ay c an rot ate fre ely.r
Clean and/ or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you hav e soft water and select
a shortest cycle to wash the gla ssware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishw a sher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket fir st. This prevents water for m dropping off
dishes in the upper basket.
In short program the washing t emperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more d ifficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwash er.
The p rogramme was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arm s.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitt ed.
This may cause
the sp ay arm jet s
to get blocked.
r
Combin at ion of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse -aid
Dishes are r emoved
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
If overflow occurs, turn off the main water supply bef ore ca lling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
Malfunction of temperature sensor or of heating
element.
Short circuit or break of temperature sensor
Open circuit or break of tem perature sensor
Longer heating time,
but not reaching required temperature
Overflow .
Failure of temperature sensor
Failure of temperature sensor
Wh en some malfunctions com e on, the appliance w ill displ ay error codes to warn you:
Longer inlet tim e.
Fau cets is not opened, or water intake is res tricted,
or water pressure is too low.
Some element of dishwasher leaks .
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight DW0845WA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight DW0845WA in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info