615154
4
Zoom out
Zoom in
Previous page
1/23
Next page
3. FAULT FINDING
3.1 Lack of display on control panel
Check if power is NO YES
getting to the appliance Check fuse for continuity Replace fuse
YES
Switch off the appliance NO Check power cord and YES Replace the mains cable
Check for 230V between loom harness for damage or loom harness as necessary
pins P0 on PCB
YES YES
Replace the PCB Check the RFI filter for damage
3.2 Drum does not turn but the control panel displays correctly
YES
Check if the belt is loose or damaged Re-fit or replace belt
NO
YES
Check if the terminals of P2 are loose Ensure that the terminals are connected correctly
NO
YES
Check the front support wheel for damage Replace the front support wheel (including wheel shaft)
NO
YES
Check if the capacitor has correct value Insert or replace capacitor
and is connected to the loom
NO
YES
Check if the tension spring Install or replace the tension spring
NO
YES
Check the motor for damage Replace the motor
NO
YES
Check for blockage/binding when drum rotates Check and remove blockage
NO
YES
Check for damage to the drum bearing Replace the drum bearing assembly
NO
YES
Check any damage to door switch Replace the door switch
NO
YES
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight B96M8W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight B96M8W in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info