484241
8
Zoom out
Zoom in
Previous page
1/12
Next page
The drum will then begin to rotate clockwise and will stop automatically when your
clothes are dry. The drum will stop and rotate anti-clockwise every few minutes to reduce
creasing.
There is an automatic 12-minutes cool down period at the end of every cycle, during
which the heater is switched off. This is to help minimize creasing.
After each of the programmes, the machine goes into anti-crease. This feature rotates the
drum for briefly every 6 minutes until the dryer is stopped or the door is opened.
NOTE: NEVER SWITCH THE DRYER OFF AND LEAVE A HOT LOAD IN THE
DRUM – RISK OF FIRE.
When drying large items such as sheets, we suggest you periodically stop the dryer to
redistribute the load. To stop the machine during a programme, simply open the door, the
drum will stop rotating automatically and restart when you close the door. Press the start
button to restart the machine.
WARNING: Never stop a tumble dryer before the end of a drying cycle unless all items
are quickly removed and spread out so that heat is dissipated.
AFTER REMOVING THE DRIED CLOTHES: ALWAYS CLEAN THE FILTER.
Failure to clean the filter will extend drying times and cause the safety cut-out to operate.
Pull the filter upwards and away from the appliance.
Remove threads or fluff by hand or with a soft brush.
Slide the filter back.
Wash the filter occasionally in detergent solution and with a soft brush to remove small
particles.
TO AVOID MINOR FAULTS
If the clothes are not dry after normal drying time:
Check that you used the correct heater setting.
Check the fuse in the moulded plug.
Check that the lint filter has been cleaned. A blocked filter will restrict the airflow.
Check that your dryer is heating – the right side below the door should feel warm after
the first 10 – 15 minutes of its programme. Failure to heat may indicate the safety cut-out
has operated. To reset, simply press the red button at the rear of the machine. If operated,
a sharp click will be heard. This cut-out only operates if the air flow is severely restricted
so make sure the filter is clean, the air inlets and outlets at the front and back are not
blocked, and that all other restrictions are removed before re-starting. If the cut-out
continues to operate after checking the above points, you should contact your service
agent.
Your dryer is designed to operate in a room temperature range of 5°C to
30° C.
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for White Knight 831WV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of White Knight 831WV in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info