780305
161
Zoom out
Zoom in
Previous page
1/288
Next page
Cycle Maintenance
137
On rims with a double base, known as hollow section rims, the rim tape must span the en-
tire base without being so wide that it protrudes at the edges of the rim.
xIf you lack the necessary expertise and the tools required, have your dealer check the
rim tape and replace it if necessary.
xWhen you have removed the tyre, check the rim tape and replace it if necessary to
prevent damage to the inner tube.
14.11.6 Fitting clincher or folding tyres
When fitting a tyre, ensure that no foreign bodies such as dirt or sand get
inside and that you do not damage the inner tube.
To fit clincher or folding tyres, follow these steps:
1. Place one edge of the rim inside the tyre.
2. Press the sidewall of the tyre fully over the edge of the rim with your thumbs.
3. Insert the inner tube valve vertically through the valve hole in the rim so that it points
directly at the wheel axle.
4. Inflate the inner tube slightly so that it becomes round, and place it completely inside
the tyre.
5. Use your thumbs to press the tyre over the edge of the rim as far as it will go.
6. Push the inner tube inside the tyre with your index fingers so as not to trap the inner
tube between the tyre and the rim.
7. Work your way evenly around the circumference of the tyre from both sides.
8. Finish by giving the tyre a firm tug downwards to move the previously fitted section
down into the deep rim base.
9. Check the position of the inner tube and press the tyre over the edge of the rim (see
“Illustr.: Fitting clincher or folding tyres (A)”).
xIf this is not possible, use the blunt end of the tyre lever to move the tyre over the
edge of the rim (see “Illustr.:Fitting clincher or folding tyres (B)”).
10. Press the valve into the inside of the tyre.
11. Realign the valve if necessary.
xIf this is not possible, detach part of the tyre sidewall and realign the inner tube.
12. Move the semi-inflated tyre back and forth several times in a sideways direction to
check that the inner tube is positioned in the tyre correctly with no pinching.
13. Inflate the inner tube to the desired tyre pressure. The maximum tyre pressure is
indicated on the sidewall of the tyre.
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whistle 2022 - General at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whistle 2022 - General in the language / languages: English as an attachment in your email.

The manual is 28.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whistle 2022 - General

Whistle 2022 - General User Manual - German - 287 pages

Whistle 2022 - General User Manual - Dutch - 286 pages

Whistle 2022 - General User Manual - French - 294 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info