662757
7
Zoom out
Zoom in
Previous page
1/39
Next page
EN
7
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, contact
Customer Support for further
instruction. Do not replace the
plug on your own.This
operation must only be carried
out by a qualied technician, in
compliance with the
manufacturer's instructions
and the current safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Close the water tap when the
washer dryer is not in use.
Do not use any solvents (e.g.
turpentine, benzene),
detergents containing
solvents, scouring powder,
glass or general purpose
cleaners, and ammable uids;
do not wash fabrics treated
with solvents or ammable
liquids in the washer dryer.
Do not over-dry the laundry.
Fabric softeners, or similar
products, should be used as
specied by the fabric softener
instructions.
Do not dry unwashed laundry.
CLEANING AND
MAINTENANCE
The appliance must be
disconnected from the power
supply before carrying out any
cleaning or maintenance
operation.
Never use steam cleaning
equipment.
corresponds to that of your
home.
For installation to comply with
current safety regulations, an
omnipolar switch with
minimum contact gap of 3mm
is required.
Regulation require that the
appliance is earthed.
For appliances with tted plug,
if the plug is not suitable for
your socket outlet, contact a
qualied technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the appliance
to a socket which can be
operated by remote control.
The power cable must be long
enough for connecting the
appliance, once tted in its
housing, to the main power
supply.
Do not pull the power supply
cable.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in
compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorised service
centre.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or
plug in water. Keep the cord
away from hot surfaces.
The electrical components
must not be accessible to the
user after installation.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
ELECTRICAL CONNECTIONS
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement
If the mains lead of this
appliance is tted with a BS
1363A 13amp fused plug, to
change a fuse in this type of
plug use an A .S .T .A .
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and the fuse (B).
2. Insert the 13A replacement
fuse inside the cover.
3. Insert both into the plug.
Important:
The cover must be re-installed
after having replaced the
fuse;if lost, the plug cannot be
used and must be replaced.
Correct replacement are
identied by the colour insert
or the colour embossed in
words on the base of the plug.
Replacement fuse covers are
available from your local
electrical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
frequently apply, but a third
type of plug and socket is also
used, the 2-pin, side earth
type.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool WWDP 10716 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool WWDP 10716 in the language / languages: English as an attachment in your email.

The manual is 9,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool WWDP 10716

Whirlpool WWDP 10716 User Manual - German - 39 pages

Whirlpool WWDP 10716 User Manual - Dutch - 39 pages

Whirlpool WWDP 10716 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info