503127
8
Zoom out
Zoom in
Previous page
1/9
Next page
67
AFTER SALES SERVICE
Before contacting After Sales Service:
1. See if you can solve the problem yourself with
the help of the Trouble-shooting guide.
2. Switch the appliance on again to see if the
problem has been solved. If it has not,
disconnect the appliance from the power
supply and wait for about an hour before
switching on again.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
the nature of the fault,
the model,
the Service number (the number after the
word SERVICE on the rating plate on the
inside of the appliance),
your full address,
your telephone number and area code.
Note:
The direc
tion of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
The door cannot be reversed on models with
front handle.
INSTALLATION
30302009.book Page 67 Monday, February 11, 2008 5:14 PM
Install the appliance away from heat sources. Installation in a hot place, near heat sources
(radiators, cookers) or direct exposure to the sun will increase energy consumption and should
be avoided.
If this is not possible, respect these minimum distances:
- 30 cm from coal or oil stoves;
- 3 cm from electric and/or gas cookers.
For optimum operation, ensure:
- a space of at least 5 cm above the appliance;
- a distance of at least 4 cm from the rear wall;
- place other cabinets at a suitable distance from the appliance to allow at least some air
circulation
Install the appliance level (adjust the front feet if necessary) in a dry and well-aired place.
Clean the inside.
Insert the accessories supplied.
Electrical connection
The electrical connections must comply with the local regulations.
Voltage and power input are specified on the rating plate inside the appliance.
Regulations require the appliance to be earthed. The manufacturer declines any
liability for injury or damage resulting from failure to observe the above rules.
If the plug and socket are not of the same type, have the socket replaced by a qualified
technician.
Do not use extension leads or multi-adapters.
Electrical disconnection
It must be possible to electrically disconnect the appliance by unplugging it or by means of a
double-pole switch installed ahead of the socket.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool WVE1862 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool WVE1862 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool WVE1862

Whirlpool WVE1862 Quick start guide - English - 2 pages

Whirlpool WVE1862 User Manual - German - 8 pages

Whirlpool WVE1862 Quick start guide - German - 2 pages

Whirlpool WVE1862 User Manual - Dutch - 8 pages

Whirlpool WVE1862 Quick start guide - Dutch - 2 pages

Whirlpool WVE1862 User Manual - French - 8 pages

Whirlpool WVE1862 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info