FINDKNSGRIPENLFGBD
The fan ensures a uniform temperature inside the refrigerator compartment, for optimum food storage.
To activate the fan, press the corresponding button (2a). It is advisable to switch the fan on when the
ambient temperature exceeds 27 - 28°C, or if water droplets form on the glass shelves, or else in very
humid conditions.
Note: Do not obstruct the front air inlet with food (2b).
The fan will start ONLY when the compressor is working.
Remember to switch off the fan when the ambient temperature decreases.
FAN WITH BUTTON (if available)
ALARM SIGNALING
Signal Cause Cure
Door open alarm The audible alarm is
activated and the light G
remains comes on.
The door has remained
open for more than 2
minutes
Close the door
Malfunction The message "F" flashes
on the display C
Product malfunction Contact the After-Sales
Service
5019 308 01057 Printed in Italy 03/12 - Whirlpool
®
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2012. All rights reserved - http://www.whirlpool.eu
This optional function can be used to save energy.
To activate the Eco mode, press the buttons F and I together for 3 seconds until an audible signal sounds.
Two seconds after activation of the Eco mode, the display goes off, except the "6th Sense" icon (and the
audible signal is deactivated, if on).
To adjust the temperature or use other functions, it is necessary to activate the display by pressing any
button.
After about 15 seconds without performing any action, the display goes off again and only the "6th Sense"
icon remains visible.
To deactivate this function, press the buttons F and I together for 3 seconds until an audible signal sounds.
The normal display is restored.
The Eco mode is automatically disabled after a power failure or a fault alarm. Remember that this function
does not disconnect the appliance from the power supply.
ECO MODE
