613195
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
Clock
This is a standard 12-hour clock (12:00-11:59).
To Set:
The microwave oven must be off.
1. Touch and hold CLOCK (TIMER/CLOCK) pad for 3 seconds
to enter Clock mode. The “hour” digit will flash.
2. Touch [+] or [–] pad repeatedly until the desired hour is
displayed (1 to 12).
3. Touch CLOCK pad to confirm the hour. The “minutes” digits
will flash.
4. Touch [+] or [–] pad repeatedly until the desired minutes are
displayed (0 to 59).
5. Touch CLOCK pad to confirm the minutes and exit Clock
mode.
To Cancel Clock: Enter Clock mode, then touch CANCEL/OFF.
The “:” will appear in the display.
Timer
NOTE: The Timer does not start or stop the microwave oven.
Cook functions may be used while the Timer is counting down.
When the cook function is active in the display, touch
TIMER/CLOCK to see the Timer count down for 3 seconds.
Touching TIMER/CLOCK while the Timer is active in the display
will send the Timer countdown to the background. While the
Timer is running in the background, the colon will flash.
The Timer may be set in the following increments, in minutes and
seconds:
To Set:
1. Touch TIMER/CLOCK. The default time of 5 seconds will
show in the display.
2. Touch the [+] or [–] pad repeatedly to set the desired time.
Touching and holding the pad will cause the display to scroll
rapidly through the increments
3. Touch START.
When the set time ends, the end-of-Timer tone will sound.
To Cancel Timer: While the Timer countdown is active in the
display, touch CANCEL/OFF.
If a cook function countdown is active in the display, touch
TIMER/CLOCK to show the Timer countdown, then touch
CANCEL/OFF to cancel the Timer. Touching CANCEL/OFF while
a cook function countdown is active in the display will cancel the
cook function, not the Timer.
The time can be reset during the countdown by repeating Step 2
above while the Timer is active in the display.
Tones
Tones are audible signals, which cannot be turned off, and
indicate the following:
One tone
Valid entry
Clock mode entered
Control lock activated
End of cooking reminder
Three tones
End of cooking cycle
During Defrost cycle, reminder to check, turn, rearrange, or
separate food
Invalid entry
Twenty tones
End of Timer (very short, quick tones)
Control Lock
The Control Lock disables the control panel pads to avoid
unintended use of the microwave oven.
To Lock/Unlock Control: The microwave oven must be off.
Touch and hold CANCEL/OFF for 3 seconds until the tone
sounds and “Loc” appears in the display. The display will return
to time of day mode (if Clock is set) after 3 seconds. Repeat to
unlock.
If any control pad is touched while the Control Lock is active,
“Loc” reappears in the display for 3 seconds, and invalid entry
tones will sound.
INCREMENT TIME SETING
0:05 0:05 to 1:00
0:15 1:15 to 3:00
0:30 3:30 to 6:00
1:00 7:00 to 30:00
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool WMC20005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool WMC20005 in the language / languages: Italian as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info