702864
21
Zoom out
Zoom in
Previous page
1/180
Next page
Remove the levelling feet by unscrewing.
Remove the bottom bracket using an 8 mm socket or spanner.
Remove and replace the pin, using a 10 mm socket to unscrew the
nut and a flat bladed screwdriver to remove the pin. You may
need to push the pin through from the underside to remove fully.
Remove the screw on the base and refit it on the other side.
Remove the blanking plates from the unused side of the fridge/
freezer and refit them in the holes left by the brackets.
Replace the door and brackets in reverse order.
When replacing the feet take care to ensure the larger foot is on
the side without the bracket.
Check the door is aligned horizontally and vertically and that the
seal fits properly all around before tightening the bottom hinge.
Note:
The direction of door opening can be changed. If this
operation is performed by After-sales Service it is not
covered by the warranty.
33502009GB.fm Page 23 Tuesday, October 27, 2009 12:58 PM
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool WM1510W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool WM1510W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info