497078

Whirlpool W10441097A SP Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
4
CONTROL PANEL AND FEATURES
7
6
3
Not all features and cycles are available on all models.
POWER
Touch to turn the washer on and off. Touch to stop/cancel a
cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle,
use for loads weighing 2.5 pounds and less, such as a
soccer uniform or a running tank and shorts.
START
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch START
when the “Add Garment” LED is on.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display. Tightly packing,
unbalanced loads, or excessive suds may cause the washer
to lengthen the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See “Cycle Guide” for available settings on
each cycle. Not all settings are available with all cycles.
1
2
3
4
2
1
5
C
B
Precision Dispense
liquid HE detergent cartridge
Powdered HE detergent compartment
Liquid fabric softener
Chlorine bleach
8
D
A
Cycle Status Lights
For details, see “Cycle Status Lights”.
Precision Dispense – Detergent Concentration
and Water Hardness
These options are used to set detergent concentration
(2x–6x) and to set water hardness level (normal, hard,
or soft). (See “About Detergent Concentration” section.)
IMPORTANT: When using the dispenser cartridge with
concentrated liquid detergent, be sure to change the detergent
concentration settings in the control if the detergent used is
different than factory preset of 2x concentration.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based on the
type of fabric and soils being washed. For best results, use
the warmest wash water safe for your fabric, following the
garment label instructions. All wash temperatures feature a
cold rinse.
Spin
This washer automatically selects the spin speed based
on the cycle selected. Some preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
NOTE: The control panel features a sensitive surface that responds to a
light touch of your nger. To ensure your selections are registered, touch
the control panel with your nger tip, not your ngernail. When selecting
a setting or option, simply touch its name.
4
A
C
B
D
B EA C D
W10441096Av40.indd 4 5/24/12 2:44 PM
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool W10441097A SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool W10441097A SP in the language / languages: English, French as an attachment in your email.

The manual is 11,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info