Manual Whirlpool TDLR 60110 (page 11 of 24) (English)

650637

Zoom out

Zoom in

1/24

EN 9

TROUBLESHOOTING GUIDE

Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early

stage and allow you to react appropriately. These faults are frequently so minor that they can be removed within

a few minutes.

Problem Causes - Solutions - Tips

Appliance does not start,

no indicator lamps are on

• Plug is not properly inserted in socket.

• Socket or fuse does not function correctly (use a table lamp or similar

appliance to test it).

• The washing machine switched off automatically to save energy, before

programme start or after programme end. To switch on the washing

machine, turn the programme selector ﬁrst to “Off/O” and then to the

desired programme again.

Appliance does not start

although “Start(Pause)”

has been pressed

• Lid is not properly closed.

• The “Child lock” function has been activated (if available on your

model). To unlock the buttons, push temperature and spin speed button

simultaneously and hold them at least for 3 seconds. The key symbol on

the display disappears and the programme can be started.

Appliance stops during the

programme, and the

“Start(Pause)” light blinks

• “Rinse hold” option is activated (if available on your model) - terminate

“Rinse hold” by pressing “Start(Pause)” or by choosing and starting

“Drain”.

• Programme has been changed - reselect desired programme and press

Start(Pause)”.

• Programme has been interrupted and eventually lid has been opened -

close lid and restart programme by pressing “Start(Pause)”.

• The appliance’s safety system has been activated (see “Description of

failure indicators”).

• Water tap is not opened or water inlet hose is kinked (“Water tap closed”

indicator lights up).

Detergent dispenser

contains residues from

detergent/additives at end

of wash

• Detergent dispenser is not properly installed, or detergent dispenser is

blocked (see “Care and Maintenance”).

• Filter in the water inlet hose is blocked (see “Care and Maintenance”).

Appliance vibrates during

spin cycle

• Washing machine is not level; the feet are not properly adjusted (see

“Installation”).

• The transport bracket has not been removed; before using the washing

machine, the transport bracket must be removed.

Final spin results are poor

• Unbalance during spinning prevented spin phase to protect the washing

machine (see “Unbalance during spinning”).

• Excessive foam formation prevented spinning; select and start “Rinse &

Spin” programme. Avoid excessive detergent dosing (see “Detergents

And Additives”).

• “Spin” button has been set to a low spin speed.

“Unbalance during spinning”

The “Spin/Drain” indicator

in the programme ﬂow bar

blinks, or the spin speed on

the display blinks, or the spin

speed indicator blinks after

the end of the programme

(depending on the model).

The laundry is still very wet.

Unbalance of the laundry load during spinning prevented the spin phase

to avoid damages on the washing machine. This is why the laundry is still

very wet.

Reason for unbalance can be: small laundry loads (consisting of only few

quite big or absorbent items, e.g. towels), or big/heavy laundry items.

• If possible avoid small laundry loads.

• It is highly recommended that you add other laundry items of different

sizes when washing a big or heavy piece of laundry.

If you want to spin the wet laundry, add more laundry items of different

sizes, and subsequently select and start the “Rinse & Spin” programme.

Programme duration is

considerably longer or

shorter as indicated in the

“programme chart” or on

the display (if available)

Normal function of the washing machine to adapt to factors that can have

an effect on the programme duration, like excessive foam formation, load

unbalance due to heavy laundry items, prolonged heating time resulting

from low inlet water temperature etc.. Moreover, the sensing system of the

washing machine adapts the programme duration to the size of the wash

load.

Depending on these factors, the duration is recalculated during the

programme and updated if necessary; during such periods, an animation

appears on the display (if available). For small loads, the programme

time indicated in the “programme chart” may be reduced by up to 50%.

What program should be selected for doing a partial load of laundry? Submitted on 27-7-2020 at 18:37
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool TDLR 60110 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool TDLR 60110 Manual

Product: