662556

Whirlpool SMP 778 Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
EN
7
Use & Care guide
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING
POWER
To activate the cooking zones:
1. Switch on the hob. If a recipient is already in place, the hob
automatically detects it. Select the suggested zone to choose the
power.
2. Place the pot in the chosen cooking zone, ensuring that it is covering
one or more of the reference points on the surface of the hob.
*
* Using this position will allow you to benet from maximum power output.
Please note: Do not cover the display or the slide touchscreen with
accessories. If a utensil is covering one of the displays, the hob may not
function properly. On the right display, the message «CHECK TOUCH AREA,
remove the object within one minute» will appear. Remove the object and
wait until the message disappears. If the message persists, switch the hob
o then on again or unplug it for 20 seconds.
3. Select the cooking zone or exible area from the left-hand display.
4. Set the desired power level by pressing or moving your nger
horizontally across the slide touchscreen.
The power level set will appear in the pane of the cooking zone selected.
Each cooking zone oers a range of dierent heat settings, from “1”
(minimum power) to “18” (maximum power).
Using the slide touchscreen, you can also select the quick heat function,
which will appear on the display with the letter “P”.
Please note: If the pot is not suitable for induction cooking, is not positioned
correctly or is not of an appropriate size, the cooking zone pane will ash. If
no pot is detected within 30seconds of making the selection, the cooking
zone switches o.
To deactivate the cooking zones:
Select the cooking zone in the left-hand display and press the “OFF”
button at the top of the slide touchscreen. If the cooking zone is still hot,
the residual heat indicator “H” will appear in the corresponding pane.
PLACE A POT
When using a cooking area composed of several zones, the pot can
be placed anywhere on the active area. The hob will automatically
recognise the actual positioning of the pot.
If you wish to add an additional pot to the active cooking area, use the
“Place a pot”
command to allow the hob to detect the new pot.
KEY LOCK
To prevent accidental activation of the hob during cleaning, or to
prevent the controls from being changed accidentally whilst cooking,
press the “Key lock”
button for 3 seconds: a beep and a warning
light indicate that this function has been activated.
The control panel will be locked, with the exception of the o button.
To reactivate the controls, press the “Key Lock” button again for 3
seconds. The warning light switches o and the hob is active again.
TIMER
When the hob is o, you can use the right-hand display as a timer.
To activate the timer:
1. Switch on the hob.
2. Press the hourglass icon
that appears on the manage functions
display.
3. Use the +/- buttons to set the time.
4. When the set time has elapsed, an acoustic signal sounds.
To change or deactivate the timer:
1. Press the hourglass icon
that appears on the manage functions
display.
2. Use the + and - buttons to reset the desired time, or press the
“STOP” button to turn o the timer.
SETTING THE COOKING TIME
The cooking zones can be programmed to switch o automatically.
To set the cooking time:
1. Select the cooking zone and set the required power level.
2. Press the stopwatch icon
that appears on the manage functions
display.
3. Use the +/- buttons to set the time.
4. Once the set time has elapsed, an acoustic signal sounds and the
cooking zone switches o automatically.
To change or deactivate the cooking timer:
1. Select the active cooking zone.
2. Press the stopwatch icon
that appears on the manage functions
display.
3. Use the + and - buttons to reset the desired time, or press the
“STOP” button to cancel the set cooking time.
A cooking time can be set for each zone or exible area by following the
same steps.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool SMP 778 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool SMP 778 in the language / languages: English as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool SMP 778

Whirlpool SMP 778 User Manual - German - 16 pages

Whirlpool SMP 778 User Manual - Dutch - 16 pages

Whirlpool SMP 778 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info