702102
9
Zoom out
Zoom in
Previous page
1/20
Next page
EN
9
Use & Care guide
ADD POT
When using a cooking area composed of several zones, the pot can be
placed anywhere on the active cooking zone. The hob will automatically
recognise the actual positioning of the pot.
If you wish to add an additional pot to the active cooking zone, use the
“add pot” command to allow the hob to detect the new pot.
TIMER
There is the option of setting a useful timer suited to a whole range of
requirements, even when the hob is not on.
To activate the timer:
1. Switch on the hob.
2. Press the settings button “ and select the timer ”.
3. Set the desired time in the format hh:mm:ss.
There are three pre-set values, making it easier to adjust to the
required time.
4. Press the “Start” button.
After selection, if the screen is not then touched for one minute it turns
black, leaving the countdown displayed.
5. When the set time has elapsed, an acoustic signal sounds.
To adjust the timer:
1. Switch on the hob.
2. Press the settings button “ and select the timer ”.
3. Press the centre of the screen and adjust the values.
To deactivate the timer press “CANCEL.
Once the time has elapsed, a new time can be set or the timer can be
switched o.
SETTING THE COOKING TIMER
The cooking zones can be programmed to switch o automatically.
To set the cooking time:
1. Select the cooking zone and set the required power level.
2. Press the stopwatch button “
that appears on the active cooking
zone.
3. Set the desired time in the format hh:mm:ss.
4. Press the “Start” button.
A bar will appear in the corresponding zone, and will ll up as the time
gradually progresses.
To adjust the set cooking time:
1. Press the power level.
2. Press the “ ” button.
3. Adjust the set cooking time.
To deactivate the set cooking time press “CANCEL.
A cooking time can be set for each zone or exible area by following the
same steps.
3
1
2
3
7
8
6
4
5
0
9
0
0
:04
:
0
0
h
h
m
m
s
s
3
3:59
Done
3
BOOST
START
5
5
1
1
2
Special
3
ADD POT
Special
CONTROL LOCK
To prevent activation of the hob during cleaning or to prevent controls
being changed during cooking, the hob can be locked using the “
control in “Settings” “ . The control panel will be locked, with the
exception of the o button. To reactivate the controls, slide your nger
towards the top of the display.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool SMF9010C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool SMF9010C in the language / languages: English as an attachment in your email.

The manual is 9,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool SMF9010C

Whirlpool SMF9010C User Manual - German - 20 pages

Whirlpool SMF9010C User Manual - Dutch - 19 pages

Whirlpool SMF9010C User Manual - French - 20 pages

Whirlpool SMF9010C User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info