304700
2
Zoom out
Zoom in
Previous page
1/13
Next page
18
BEFORE USING THE WASHING MACHINE
1.Removing the packaging and inspection
After unpacking, make sure that the washing
machine is undamaged. If in doubt, do not use the
washing machine. Contact After-Sales Service or
your local retailer
Check that the accessories and supplied parts are
all present
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children,
as they are potentially dangerous
2.Remove the transport bolts
The washing machine is fitted with transport
bolts to avoid any possible damage to the interior
during transport. Before using the machine, it is
imperative that the transport bolts are removed
3.Install the washing machine
Remove the protective film from the control
panel
Move the appliance without lifting it by the
worktop
Install the appliance on a solid and level floor
surface, preferably in a corner of the room
Make sure that all four feet are stable and resting
on the floor and then check that the washing
machine is perfectly level (use a spirit level).
4.Water inlet
Connect the water supply inlet hose in
accordance with the regulations of your local
water company
Water inlet: Cold water only
Water tap: 3/4” threaded hose
connector
Water pressure
(flow pressure): 100-1000 kPa (1-10 bar).
5.Drain
Connect the drain hose to the siphon or hook it
over the edge of a sink by means of the “U” bend
supplied
If the washing machine is connected to an
integrated drainage system, ensure the latter is
equipped with a vent to avoid simultaneous
loading and draining of water (siphoning effect)
6.Electrical connection
Electrical connections must be carried out by a
qualified technician in compliance with the
manufacturer's instructions and current standard
safety regulations
Data regarding voltage, power consumption and
protection requirements is given on the inside of
the door.
The appliance must be connected to the mains by
means of a socket with an earth connection in
accordance with current regulations. The
washing machine must be earthed by law. The
manufacturer declines all liability for damage to
property or injury to persons or animals due to
non-compliance with the directions given above
Do not use extension leads or multiple sockets
Before any maintenance on the washing machine
disconnect it from the mains supply
After installation, access to the mains plug or to
disconnection from mains supply must be
ensured at all times via a double-pole switch
Do not operate the washing machine if it has
been damaged during transport. Inform the
After-Sales Service
Mains cable replacement is only to be carried out
by After-Sales Service
The appliance must only be used in the
household for the prescribed uses
Minimum housing dimensions:
Width: 600 mm
Height: 825 mm
Depth: 600 mm
30105536aGB.fm Page 18 Thursday, December 30, 2004 10:53 AM
Black process 45.0° 100.0 LPI
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool sensation 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool sensation 1400 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool sensation 1400

Whirlpool sensation 1400 Quick start guide - English - 2 pages

Whirlpool sensation 1400 User Manual - English - 12 pages

Whirlpool sensation 1400 User Manual - English - 12 pages

Whirlpool sensation 1400 Quick start guide - German - 2 pages

Whirlpool sensation 1400 User Manual - German - 14 pages

Whirlpool sensation 1400 User Manual - Dutch - 12 pages

Whirlpool sensation 1400 User Manual - Dutch - 12 pages

Whirlpool sensation 1400 Quick start guide - Dutch - 2 pages

Whirlpool sensation 1400 Quick start guide - French - 2 pages

Whirlpool sensation 1400 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info