573410
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
Always dry a full load: depending on the type of laundry and the programme/drying time. For
detailed information, refer to the separate Quick Reference Guide.
Use the maximum spin speed allowed by your washing machine, since draining the water
mechanically requires less energy. You will save time and energy when running your drying cycle.
Do not overdry the laundry.
Clean the door filter after every drying cycle.
Clean the bottom filter after every fifth drying cycle.
Place your dryer in a room with a temperature between 15°C and 20°C. In case of higher
temperature, ventilate the room, e.g. open the window.
Always select the correct programme/ drying time for the load in order to obtain the desired drying
results.
Select the gentle option only with small loads.
When drying cotton, dry iron dry and cupboard dry loads together: start with the iron dry
programme/drying time setting, remove the laundry to be ironed at the end of that cycle and dry
the remainder of the load on the cupboard dry setting.
If a fault occurs, before contacting our After-Sales Service, perform the following checks to try to
remedy the problem:
Drying takes too long / laundry is not dry enough:
Correct programme selected?
Inserted laundry too wet (Washing machine spin speed less than 800 rpm? When the spinning
speed is less than 800 rpm the water container fault may occur during the drying cycle)?
Door filter clogged (filter indicator lamp on)?
Bottom filter clogged? (refer to the chapter “Door filter and bottom filter”).
Is the room temperature too high?
END indicator lamps on? The drying cycle is complete and the laundry can be taken out.
‘Gentle’ option selected? The ‘gentle’ option should only be selected with small loads.
Type of laundry mixed (for example cotton and synthetic load)?
The dryer does not operate:
(after a power failure and/or interruption to the mains supply, always press the Start/Pause
button).
Plug connector properly inserted into the mains electricity socket?
Dryer automatically switched off for energy saving? See paragraph “Automatic switch-off function”.
Power failure?
•Fuse blown?
Door properly closed?
Drying programme selected?
Start delay option selected?
Start/Pause button activated?
Indicator lamps are lighting up?
TROUBLESHOOTING GUIDE/AFTER-SALES SERVICE
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool Pure AC 8533 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool Pure AC 8533 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool Pure AC 8533

Whirlpool Pure AC 8533 User Manual - German - 17 pages

Whirlpool Pure AC 8533 User Manual - Dutch - 17 pages

Whirlpool Pure AC 8533 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info