477375
2
Zoom out
Zoom in
Previous page
1/2
Next page
5019 301 05229
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
temperature selector
to the desired
temperature.
4.
Special options
can be selected.
5. Check that the door is well closed and turn on the
washing machine by pressing the
“ON/OFF”
button. The indicator lights up, indicating that
the washing machine is on.
“Half Load” button
Reduces water consumption, above all during rinsing.
Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note:
Reduce the detergent quantity.
“Rapid Wash” button
For quick, economical washes.
Ideal for minimum loads of lightly-soiled articles.
Note:
reduce the detergent quantity.
“Intensive Rinse” button
More water and a longer time in rinse cycle is added.
This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse Hold” button
The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Terminate the “Rinse Hold” option:
Press the “Rinse Hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme.
“Spin Speed Reduction” button
Reduces the predetermined automatic maximum
spin speed.
In some programmes the maximum final spin speed
is limited to go easy on your laundry items.
Selection of a higher spin speed is not possible.
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)
Cotton 95 5.0 49 1.70 1:50
Cotton 60 5.0 44 0.95 2:00
Cotton 40 5.0 44 0.55 1:50
Synthetics 60 2.5 55 0.80 1:25
Synthetics 40 2.5 50 0.60 0:50
Delicates 40 1.5 50 0.50 0:45
Wool 40 1.0 50 0.50 0:40
Silk 30 1.0 37 0.40 0:40
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
SELECT ANY DESIDERED OPTION
To reselect a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the
ON/OFF
” button.
2. Select the new programme.
3. Start the programme by pressing the
ON/OFF
” button.
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
WATER LEVEL
It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.
SPIN SPEED CONTROL
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine
damage and excessive vibrations and
consequent noise produced by the machine
due to load unbalance: by selecting high spin
speeds the noise level increases.
MOTOR NOISE
The running noises of the new, electronically-
controlled motor are not the same as the
ones you are used to from your old appliance.
Don’t be surprised - modern technology has a
modern sound.
CLEANING THE FILTER
To ensure an impeccable function of the
pump, check the filter regular and clean it if
necessary.
PROGRAMME CHANGE
PROGRAMME END
NOTES AND INDICATIONS FOR USE
3gb05229.fm5 Page 2 Wednesday, July 11, 2001 5:57 PM
Black Process Plate
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool Monaco 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool Monaco 1400 in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool Monaco 1400

Whirlpool Monaco 1400 User Manual - English - 18 pages

Whirlpool Monaco 1400 Quick start guide - German - 2 pages

Whirlpool Monaco 1400 User Manual - German - 19 pages

Whirlpool Monaco 1400 Quick start guide - Dutch - 2 pages

Whirlpool Monaco 1400 User Manual - Dutch - 18 pages

Whirlpool Monaco 1400 Quick start guide - French - 2 pages

Whirlpool Monaco 1400 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info