477375
13
Zoom out
Zoom in
Previous page
1/18
Next page
32
a. Water inlet fault (no or insufficient water
supply)
The “Water tap” indicator is on or the display
alternately shows “FH”. Switch off the appliance
by turning the programme selector to the “
position and unplug it.
Check wheter:
the water tap is completely open, and the water
supply pressure is sufficient;
the water inlet hose is kinked;
the mesh filters are blocked (see “Care and
Maintenance” / “Water Hose Mesh Filters”);
the water inlet hose is frozen.
Connect the appliance to the electrical supply.
Reselect the desired programme and press the
“Start/Pause” button again to continue with the
programme (do not add detergent for this
programme)
b.Draining out fault
The display alternately shows “FP”. Switch off the
appliance by turning the programme selector to
the “ ” position and unplug it.
Check whether:
the drain hose is kinked (see “Installation
Instructions”);
the pump / filter are blocked (see “Removing the
Filter / Draining Residual Water”).
IMPORTANT: before draining, allow the wash
water to cool down.
the drain hose is frozen.
Connect the appliance to the electrical supply.
Reselect the desired programme and press the
“Start/Pause” button again to continue with the
programme (do not add detergent for this
programme).
If the fault re-occurs, contact After-Sales Service
(see “After-Sales Service”).
c. Electrical module fault
The display shows “F4” to “F15”.
Switch off the appliance. Select a programme
and press the “Start/Pause” button once again.
The programme will continue.
If the fault re-occurs, contact After Sales Service
(See “After-Sales Service”).
d.Water Stop fault (if available)
An audible tone sounds. The light of the Water
Stop indication is on.
The display shows “FA” and the pump is running.
Switch off the appliance by turning the
programme selector to the “ ” position, unplug
the appliance and make sure that the water tap is
closed.
The “Water Stop” may have been triggered
by:
1.too much foam.
2.a leak in the inlet hose or in the appliance.
Tilt the appliance forwards carefully to allow the
collected water to flow out.
Then:
1.connect the appliance to the electrical supply,
2.open water supply to machine (if “Start/Pause”
button is not pressed, but machine begins to fill,
close water supply and call After-Sales Service),
3.reselect the desired programme and press the
“Start/Pause” button (there is no need to add
additional detergent). The programme will
continue.
If the faults occurs again, call After-Sales Service with
details about the fault (see “After-Sales Service”).
3gb05030.fm5 Page 32 Monday, September 17, 2001 3:33 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool Monaco 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool Monaco 1400 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool Monaco 1400

Whirlpool Monaco 1400 Quick start guide - English - 2 pages

Whirlpool Monaco 1400 Quick start guide - German - 2 pages

Whirlpool Monaco 1400 User Manual - German - 19 pages

Whirlpool Monaco 1400 Quick start guide - Dutch - 2 pages

Whirlpool Monaco 1400 User Manual - Dutch - 18 pages

Whirlpool Monaco 1400 Quick start guide - French - 2 pages

Whirlpool Monaco 1400 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info