304248
11
Zoom out
Zoom in
Previous page
1/14
Next page
28
TROUBLESHOOTING GUIDE
Depending on the model, your washing machine is
equipped with various automatic safety functions.
This enables faults to be detected in good time and
the safety system can react appropriately.
These faults are frequently so minor that they can
be solved within a few minutes.
The appliance will not start, no lamp lights
up.
Check whether:
the mains plug is inserted into the socket;
the wall socket is functioning correctly
(use a table lamp or similar);
a programme is selected correctly;
the
“On/Off”
button (depending on model) has
been pressed.
The appliance will not start, but...(varies
depending on model)
...the “Start/Pause” lamp is flashing.
Check whether:
the appliance door is properly closed
(child safety);
the programme has been changed;
the water tap is open. If not, open the tap and
press the
“Start/Pause”
button.
...the “On/Off” lamp is on.
Check whether:
the appliance door is properly closed
(child safety);
a programme has been selected and the
programme is started;
the water tap is open. If not, open the tap and
switch the appliance first off, then on.
The appliance stops during the programme
(varies depending on model).
Check whether:
the
“Rinse Hold”
lamp is on, terminate this
option by pressing the button again;
another programme has been selected.
Reselect the desired programme and press the
“Start/Pause”
button;
“Start/Pause”
lamp is flashing. Press
“Start/
Pause”
button;
the
“Rinse Hold”
button is pushed, terminate
this option by pressing the button again;
•“On/Off
lamp is off. Press
“On/Off”
button;
the washing machine safety system has been
activated (see fault description table).
Detergent and additive product residues in
dispenser at end of wash.
Check whether:
the siphon is correctly installed and clean
(see “Care and Maintenance”);
enough water is being supplied. The mesh filters
between the inlet hose and the tap could be
blocked (see “Care and Maintenance”). Check
and clean the filter two or three times a year
(see “Removing the filter”).
The appliance vibrates during the spin
cycle.
Check whether:
the appliance is levelled and solidly installed on
all four feet (see “Installation Guide”);
the transit bolts have been removed. The transit
bolts must be removed before the appliance can
be used (see “Installation Guide”).
Final spin results are poor:
The appliance has an imbalance detection and
correction system. If individual heavy articles are
loaded (bathmat, bathrobe, etc.) this system may
reduce the spin speed automatically to protect the
appliance or even interrupt the spin cycle altogether, if
the imbalance is too high even after several spin starts.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to balance
the load and repeat the spin cycle.
Excessive foam formation may prevent spinning.
Ensure correct amount of detergent is used
No water or insufficient water supply:
the appliance has a safety hose and the safety
valve has opened (red indicator in the safety
valve inspector window).
In this case replace it with a new safety hose.
What should I do when the automatic safety system detects a malfunction? (
varies
depending on model)
The programme is interrupted and various indicators (if available) point to the source of the fault.
Fault description table
Small lamp lights up Digital display Fault description
“Water tap” “FH” “Water inlet fault”
- “FP” “Draining fault”
- from “F4” to “F15” “Electrical components fault”
“Water Stop” “FA” “Water Stop fault”
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool magic 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool magic 1000 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool magic 1000

Whirlpool magic 1000 Quick start guide - English - 2 pages

Whirlpool magic 1000 Quick start guide - German - 2 pages

Whirlpool magic 1000 User Manual - German - 15 pages

Whirlpool magic 1000 Specifications - Dutch - 2 pages

Whirlpool magic 1000 User Manual - Dutch - 13 pages

Whirlpool magic 1000 Quick start guide - French - 2 pages

Whirlpool magic 1000 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info