483413
8
Zoom out
Zoom in
Previous page
1/12
Next page
GB 8
TROUBLESHOOTING GUIDE
Your washing machine is equipped with various automatic safety functions. These enable faults to be
detected in good time and the safety system can react appropriately. These faults are frequently so minor
that they can be removed within a few minutes.
Problem Causes, Solutions, Tips
Appliance does not start, no
indicator lamps are on
Plug is not properly inserted in socket.
Socket or fuse does not function correctly (use a table lamp or similar appliance to test it).
the “On/Off” button has not been pressed (if available on your model).
Appliance does not start
although “Start/Pause” has
been pressed
Door is not properly closed.
The “Child lock/Lock buttons” feature has been activated (if available on
your model). To unlock the buttons, push the two buttons marked with the key
symbol simultaneously and hold them at least for 3 seconds. The key symbol on the
display disappears and the programme can be started.
Appliance stops during the
programme, and the “Start/
Pause” light blinks
“Rinse hold” is activated, and the “Rinse hold” symbol lights up in the programme
sequence indicator. Press the
“Start/Pause”
button to start the drain programme.
Programme has been changed - reselect desired programme and press
“Start/Pause”
.
Programme has been interrupted and eventually door has been opened - close
door and restart programme by pressing
“Start/Pause”
.
The appliance’s safety system has been activated (see “Description of failure
indications” in your programme chart).
Water tap is not opened or water inlet hose is kinked or blocked (“Water tap
closed” indication lights up).
Detergent dispenser
contains residues from
detergent and/or additives
Water entering is not enough; the mesh filters of the water supply could be blocked
(see “Care And Maintenance”).
Appliance vibrates during
spin cycle
Transport bolts have not been removed;
before using the washing machine, it
is imperative that the transport bolts are removed.
Appliance is not level / not standing firmly on all four feet (see separate “Installation Guide”).
Final spin results are poor
The appliance has an unbalance detection and correction system. If individual heavy items
are loaded (e.g. bathrobes), this system may reduce the spin speed automatically or even
interrupt the spin completely in order to protect the washing machine.
Heavy item(s) prevented spinning; add smaller articles of laundry and repeat spin cycle.
Excessive foam formation prevented spinning; select and start “Rinse & Spin”
programme. Avoid excessive detergent dosing (see “Detergents And Additives”).
“Spin” button has been set to a low spin speed.
The washing machine is at a
standstill for several minutes
in the middle of a running
programme; the wash
programme seems not to
proceed
Normal function of the washing machine used for optimizing the rinse phase. One
reason for such a pause can be that you might have used too much detergent; the
washing machine automatically interrupts the programme to have the foam reduced.
This standstill may be repeated several times until the foam reduction is sufficient to
continue the wash cycle. If the foam persists, the red “Service” indicator will light up
and the display shows “F18” or “Fod” - refer to the instructions concerning the
“Service” indication on the next pages in this case.
Detergent residues on
laundry after wash
Whitish residues on dark fabrics are caused by insoluble compounds used in
phosphate-free powder detergents.
- avoid overdosing of detergent; use liquid detergent; select “Intensive Rinse” option
if possible; brush out the fabric.
Programme duration is
considerably longer or
shorter as indicated in the
“programme chart” or on
the display (if available)
Normal function of the washing machine to adapt to factors that can have an effect
on the programme duration, like excessive foam formation, load unbalance due to
heavy laundry items, prolonged heating time resulting from low inlet water
temperature etc.. Moreover, the sensing system of the washing machine adapts the
programme duration to the size of the wash load.
Depending on these factors, the duration is recalculated during the programme and
updated if necessary;
during such periods, an animation appears on the display
(if available).
For small loads, the programme time indicated in the "programme
chart" may be reduced by up to 50%.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool London 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool London 1400 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool London 1400

Whirlpool London 1400 Quick start guide - German - 2 pages

Whirlpool London 1400 User Manual - German - 11 pages

Whirlpool London 1400 Quick start guide - Dutch - 2 pages

Whirlpool London 1400 User Manual - Dutch - 11 pages

Whirlpool London 1400 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info