Manual Whirlpool IVH840CNE (page 30 of 124) (English, German, Dutch, French, Italian)

757513

Zoom out

Zoom in

1/124

Instructions for assembly

2 Instructions for assembly

2.1 Safety instructions for kitchen unit ﬁ tters

• The appliance must be handled and installed by two or

more persons - risk of injury. Use protective gloves to

unpack and install - risk of cuts.

• Veneers, adhesives and plastic surfaces of surrounding

furniture must be temperature resistant (at least 75°C).

If the veneers and surfaces are not suﬃ ciently heat

resistant they may become deformed.

• Ensure that all live connections are safely insulated

when installing the hob.

• Cover strips between the wall and the worktop behind

the hob which are made of solid wood are permissible

as long as minimum clearances in accordance with the

installation diagrams are maintained.

• Minimum clearances of the hob cut-out towards the

rear are to be maintained in accordance with the instal-

lation diagram.

• For installation directly next to a tall cupboard, a safety

distance of at least 50 mm must be ensured. The side

surface of the tall cupboard should be ﬁ tted with heat

resistant material. Due to working requirements, howe-

ver, the distance should be at least 300 mm.

• The clearance between the hob and an extraction

hood must be at least as large as that stipulated in the

assembly instructions for the cooker hood.

• The packaging materials (plastic foil, polystyrene, nails

etc.) must be kept out of reach of children as these

parts are potentially dangerous. Small parts can be

swallowed and there is a danger of plastic sheeting

causing suﬀ ocation.

2.2 Ventilation

• The induction hob is ﬁ tted with a fan that switches on

and oﬀ automatically. The fan starts slowly when the

electronic system temperatures exceed a speciﬁ c limit.

When the induction hob is used intensively, the fan will

switch to a greater velocity. Once the electronic system

has cooled down suﬃ ciently, the fan will reduce its

velocity and switch oﬀ again automatically.

• Clearance between the induction hob and kitchen furni-

ture or built-in units must provide for suﬃ cient ventilati-

on of the induction hob.

• If the power level of a cooking zone is automatically rai-

sed or lowered (see section on thermal cut-oﬀ device) it

is likely that the cooling system does not cool suﬃ cient-

ly. In this case we recommend that the back wall of the

bottom kitchen unit in the area of the worktop cut-out

be opened and that the front transverse strip of the unit

be removed over the entire width of the appliance in

order to promote the circulation of air.

In order to better ventilate the hob, an air

gap of 5 mm should be left at the front.

2.3 Installation

Important information

• Installation, including water supply (if any) and electrical

connections, and repairs must be carried out by a qua-

liﬁ ed technician. Do not repair or replace any part of the

appliance unless speciﬁ cally stated in the user manual.

• Avoid excessive thermal development from below e.g.

from a baking oven without a cross ﬂ ow cooling device.

• The induction hob may not be used when pyrolysis

operation is taking place in a built-in oven.

• If the appliance is not installed above an oven, a

separator panel (not included) must be installed in the

compartment under the appliance at least 20mm.

• The hob may not be installed above refrigerators, free-

zers, dishwashers, washing machines or dryers.

• To avoid danger of ﬁ re, make sure that no combustible

objects which could easily catch ﬁ re or become defor-

med on exposure to heat are directly next to or under

the surface.

• The front panel of 170 mm must be inserted. It may

only be removed with tools.

Sealing of the hob

Before installation, correctly insert the sealing unit deliver-

ed with the hob.

• No liquids may penetrate between the edge of the hob

and the worktop or between the hob and the wall and

come into contact with any electrical appliances.

• When installing a hob into an uneven worktop, e.g. with

a ceramic or similar covering (tiles etc.), the seal on the

hob is to be removed and the seal between the hob

and worktop made with plastic sealing materials (putty).

• The hob must under no circumstances be sealed with

silicone sealant! This would make it impossible to remo-

ve the hob at a later date without damaging it.

Working surface cut-out

Cut out the worktop recess accurately with a good, straight

saw blade or recessing machine. The cut edges should

then be sealed so that no moisture can penetrate.

The area is cut out as illustrated. The glass ceramic hob

must have a level and ﬂ ush bearing. Any distortion may

lead to fracture of the glass panel. Make sure that the sea-

ling of the hob is properly seated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool IVH840CNE in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool IVH840CNE Manual

Product: