315397
10
Zoom out
Zoom in
Previous page
1/12
Next page
GB 10
Red
indication
lights up
Indication
on display
Description
Causes
Solutions
“Service”
from “F03” to “F35”
(except “F18” and
“F24”)
“Electrical module fault”
Push the “Reset” button for at least 3 seconds.
from “F40” to “F43” “Electrical module fault”
Make sure that the water tap is open. If yes:
Switch the washing machine off by turning the programme
selector to the “Off/O” position; then turn the programme
selector to a wash programme again. If there is still a failure:
Push the “Reset” button for at least 3 seconds.
“F24” “Water level too high” (after programme cancellation or false
operating). Switch off the washing machine by turning the
programme selector to the “Off/O” position. Turn the
programme selector to a wash programme again, shortly press
the “Reset/Drain” button and press
“Start (Pause)”
within 15
seconds to start the Drain programme.
“F02” or “FA” “Waterstop fault”
For models with big display, the red “Waterstop” symbol
will also light up in this case.
Turn the programme selector to the “Off/O” position, pull out
the mains plug and turn the water tap off. Tilt the appliance
forward carefully to allow collected water to flow out from the
bottom. Then:
Plug in the appliance again.
Turn the water tap on (if water immediately flows into the
appliance without the appliance being started, there is a failure;
turn off the tap and notify the After-Sales Service).
Select and start the desired programme again.
“F18” or “FoD” “Overfoaming”
Too much foam interrupted the wash programme.
Select and start the “Rinse & Spin” programme.
Afterwards select and start the desired programme again,
using less detergent. See also paragraph “The machine is at a
standstill....” on first page of Troubleshooting Guide.
If any of the faults described above persist, unplug the
appliance, turn off the water tap and contact our
After-Sales Service (see next chapter).
30106300aGB.fm Page 10 Friday, January 8, 2010 5:08 PM
Black process 45.0° 130.0 LPI
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool green 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool green 1400 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool green 1400

Whirlpool green 1400 Quick start guide - English - 2 pages

Whirlpool green 1400 Quick start guide - German - 2 pages

Whirlpool green 1400 User Manual - German - 11 pages

Whirlpool green 1400 User Manual - Dutch - 11 pages

Whirlpool green 1400 User Manual - Dutch - 2 pages

Whirlpool green 1400 Quick start guide - French - 2 pages

Whirlpool green 1400 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info