650486
41
Zoom out
Zoom in
Previous page
1/52
Next page
41
EN
FAILURE INDICATORS AND MESSAGES
Below is a summary of possible failure causes and
solutions.
If the problem persists after having removed the
origin of the failure, press On/O for at least three
seconds. If afterwards the failure indication still
Failure Indicator
lights up
Display
message
Possible Cause Possible Solution
Open water
tap
No or not sucient water
supply
• Water tap closed
• Kinks in inlet hose
• Water tap pressure too
low
• Mesh lters in inlet hose
clogged
• Water inlet hose frozen
up
Open water tap
Make sure there are no kinks in the inlet
hose
Make sure water pressure is sucient
Clean mesh lters in inlet hose (CLEANING
AND MAINTENANCE)
Install washing machine at an ambient
temperature of at least 5°C
After problem has been removed, press
Start/Pause. If problem persists, press On/
O for at least 3 seconds.
Water lter
clogged
Waste water is not
pumped out
• Kinks in drain hose
• Drain hose blocked or
frozen up
• Filter blocked
• Pump blocked
Check drain hose for kinks
Install washing machine at an ambient
temperature of at least 5°C
Clean water lter as described in section
CLEANING THE FILTER.
After problem has been removed, press
Start/Pause. If problem persists, press On/
O for at least 3 seconds.
Over
foaming
Excessive foam formation
(maybe by overdosage
of detergent) interrupted
the programme. The
interruption can be
repeated several times
until the foam reduction
is sucient.
Start “Rinse&Spin” programme, with
option Intensive Rinse.
Respect the dosing recommendations by
the detergent manufacturer.
Adjust and use the Dosing Aid function.
Make sure that the water lter is clean.
Load
unbalance
Spin speed
“0” blinks
Unbalance in laundry
load prevented spin
cycle, to protect washing
machine
If you want to spin the wet laundry, add
more laundry items of dierent sizes and
start “Rinse&Spin”.
Avoid small laundry loads consisting of
few big, absorbent pieces of laundry. Wash
dierent sizes of articles in one load.
persists, close the water tap, switch o and unplug
the washing machine and contact our After-Sales
Service.
Indication on control panel Possible Cause Possible Solution
Door open indicator blinks
The door cannot lock Firmly press the door in area of door lock, to pro-
perly close it. Then press Start/Pause. If the problem
persists, press On/O for at least 3 seconds.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR90420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR90420 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR90420

Whirlpool FSCR90420 Quick start guide - English - 8 pages

Whirlpool FSCR90420 Quick start guide - German - 8 pages

Whirlpool FSCR90420 Usermanual and installation guide - German - 52 pages

Whirlpool FSCR90420 Quick start guide - Dutch - 8 pages

Whirlpool FSCR90420 Usermanual and installation guide - Dutch - 52 pages

Whirlpool FSCR90420 Quick start guide - French - 8 pages

Whirlpool FSCR90420 Usermanual and installation guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info