650492
16
Zoom out
Zoom in
Previous page
1/64
Next page
16
6. ADD DETERGENT
• If you want to add the detergent
manually, pull out the detergent
dispenser and add detergent (and additives) now,
as indicated in section DETERGENT DISPENSER.
Observe the dosing recommendations on the
detergent pack. If you have selected PREWASH
or FINISH IN, observe the instructions in section
PROGRAMMES AND OPTIONS, and FUNCTIONS.
Afterwards carefully close the detergent
dispenser.
• If you want the washing machine to dose the
detergent automatically, simply make sure the
Auto Dosing function is activated (refer to section
OPTIONS, FUNCTIONS AND INDICATORS / Auto
dosing). The detergent is added by the Auto
dosing system after programme start.
To assure correct dosage, make sure that the Auto
dosing system is adapted to your detergents /
softener (refer to AUTO DOSING / AILY USE).
Correct dosing of detergent / additives is
important, because
• it optimizes the cleaning result
• it avoids irritating residues of surplus detergent in
your laundry
• it saves money by avoiding waste of surplus
detergent
• it protects the washing machine by avoiding
calcication of components
• it respects the environment by avoiding
unnecessary environmental burden
7. START PROGRAMME
• Press and hold “Start/Pause” until the
button lights up solidly; the programme
starts.
• The drum turns, and the load is detected. The
display indicates the load sensing, while on the
control panel an animation occurs.
• The remaining programme duration which is
indicated on the display can vary. Factors like
unbalance in the wash load, or foam formation,
can have an eect on the programme duration.
Whenever the remaining programme duration
is calculated newly, the display indicates the
sensing, and an animation occurs on the control
panel.
• If the washing machine detects an unbalance
in the laundry load, the washing machine
automatically tries to create a balance. The
display indicates the load balancing.
Refer to section Troubleshooting for more
information on unbalance in the laundry load.
8. CHANGE THE SETTINGS OF A RUNNING
PROGRAMME, IF NEEDED
You can still change the settings while a
programme is running. The changes will be
applied, provided the respective programme phase
has not nished yet. If the change is not possible,
there will be an error sound when pressing the
button.
To change temperature or spin
speed:
Press the Temperature or Spin
speed button; the display indicates that
temperature or spin speed can be set. Press
the button repeatedly, until the desired
value appears on the display. Or select the
desired value by pressing the UP or DOWN
key.
To add or remove an option:
Press the Options button; the display
indicates the options which are selectable
for the programme. Press the OK key to
select or deselect an option.
For options directly selectable by a button,
press the button to select or deselect the option.
1 2
To change the “Finish in” delay:
Press the Finish in button; the selected
delay blinks on the display. While blinking,
the value can be changed by pressing the
UP or DOWN key.
The programme proceeds automatically after the
setting has been changed. To prevent that a
running programme is changed by accident (for
instance by children), use the “Key lock” (see
section FUNCTIONS).
To change the settings of a running programme,
you can also
• Press “Start/Pause” to put the running
programme on pause
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR12441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR12441 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR12441

Whirlpool FSCR12441 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info