650492
13
Zoom out
Zoom in
Previous page
1/64
Next page
13
EN
HOW TO USE
THE APPLIANCE
If you plug in the washing machine, it will switch on
automatically. You will be asked to set the desired
language for the display.
Press the UP or DOWN key to select the desired
language, and conrm by pressing the OK key.
Afterwards you can adapt the water hardness
setting of your washing machine to your regional
water hardness. This is recommended in order
to optimize the Auto dosing function. Choose
between soft / medium / hard and conrm by
pressing the OK key.
Finally determine if you want to use Tank2 of the
Auto dosing system for softener or detergent (refer
to sections AUTO DOSING).
All settings which you do during the initial set-up
can be changed again later, if needed.
To remove any residues from the manufacturing
process:
1. Select programme “Cotton” with temperature
95°C.
2. Add a small amount of detergent to the
manual dosing compartment of the detergent
dispenser (maximum 1/3 of the quantity the
detergent manufacturer recommends for lightly
soiled laundry).
Deactivate the buttons for Auto dosing (Tank1 and
Tank2): press them so that the button light goes
o.
3. Start the programme without adding any
laundry.
See section “DAILY USE” for more information on
how to select and start a programme.
AUTO DOSING FUNCTION
The detergent dispenser of the washing machine is
equipped with a two tanks system for the automatic
dispensing of liquid detergent and softener.
Before using this function, follow the instructions
in the USE AND CARE GUIDE/AUTO DOSING – FIRST
USE to:
1. Set the correct water hardness level
2. Set tank 2 content. By default, Tank
1 is set for a
detergent (your main detergent), and Tank
2 is set
for fabric softener. If you do not use fabric softener,
set Tank
2 for another detergent.
3. Check/adjust the preset dosing quantities.
By default, the system comes with the following
dosing values:
• 80
ml detergent for Tank
1
• 30
ml softener for Tank
2
You need to adjust these preset dosing values to
the dosing values reported on the detergent and
softener package that you intend to use.
After the Auto Dosing function is set for use, ll the
tanks with the appropriate content and install the
labels on the tanks accordingly, as explained in the
USE AND CARE GUIDE / AUTO DOSING – FIRST USE.
FIRST TIME USE
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR12441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR12441 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR12441

Whirlpool FSCR12441 Quick start guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info