650493
44
Zoom out
Zoom in
Previous page
1/54
Next page
44
Failure indicator
lights up
Display
message
Possible Cause Possible Solution
FdL
(or F29)
The door cannot unlock. Firmly press the door on the area of the
door lock, then press On/O for at least 3
seconds.
If hot cycle is selected, wait until cool
down and press again On/O for at least 3
seconds.
Switch on the washing machine. If failure
still appears, check and eventually remove
possible cause as indicated for failure
“Clean lter”. Then switch the washing
machine on again. If door does not unlock,
press On/O for at least 3 seconds.
If door still does not unlock, refer to
section “DOOR – HOW TO OPEN IT IN CASE
OF A FAILURE”. Before draining water /
opening the door, wait until the water has
cooled down (for hot wash programmes).
Call Service
F24
Too much laundry for a
programme with small
maximum load
Too much inlet water
Select and start programme “Rinse and
Spin” to complete the interrupted wash
programme.
Do not overload the washing machine.
Respect the maximum load size of the
programmes indicated in the Programme
Chart.
Turn o the water tap. Press On/O for at
least 3 seconds to drain the water; wait
until the drain phase has ended (End will
appear on display).
Turn on the water tap again. – If water
immediately ows into the washing
machine (without having started a
programme), there is a failure of an
electrical component. Close water tap,
switch o and unplug the washing
machine. Contact our After-Sales Service.
Call Service
F02
Water stop failure – water
leakage detected in
bottom tray.
Press Start/Pause. If problem persists, press
On/O for at least 3 seconds. If failure
persists, contact After-Sales Service.
Call Service
F04 to F99
Failure of an electrical
component
Press On/O button for at least 3 seconds
to reset the failure. If problem persists,
switch o washing machine, close the
water tap and unplug it; call After-Sales
Service.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR12430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR12430 in the language / languages: English as an attachment in your email.

The manual is 6,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR12430

Whirlpool FSCR12430 Quick start guide - English - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info