650479

Whirlpool FSCR 90430 Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
7
EN
OPTIONS which are selectable by pressing the Options
button
Prewash
Helps to clean heavily soiled laundry by adding a prewash
phase to the wash programme selected.
Extends the programme by about 20 minutes.
Add detergent to the prewash compartment of the detergent
dispenser as well, or directly into the drum. Use powder detergent
for the main wash in order to ensure that the detergent stays in the
detergent dispenser until the start of the main wash phase.
Hot Finish
The programme ends with a warm rinse phase. This relaxes
the bres of your laundry, and the laundry feels
comfortably warm when taking it out a short time after
programme end.
Bio Stains 15°
Helps to remove all kinds of stains, except grease/oil.
The programme begins with a cold water wash
phase. Extends the programme by about 10 minutes.
Pre-treatment recommended for stubborn stains.
Not selectable for Cotton 95°C.
Heavy Soil
Helps to clean heavily soiled, stained laundry by
optimising the eciency of additives for stain removal.
Add an appropriate amount of in-wash additive for stain removal
(powder) to the main wash compartment, together with your
detergent (powder only). May extend the programme by up to
15 minutes.
Appropriate for use with oxygen-based stain removers and
bleaching agents.
Chlorine or perborate bleaches must not be used!
Intensive Rinse
Helps to avoid detergent residues in the laundry by
extending the rinse phase.
Particularly suitable for washing baby laundry, for people suering
from allergies and for areas with soft water.
Rapid
Enables quicker washing.
Recommendable for only lightly soiled laundry.
Not selectable for Cotton 95 °C.
FUNCTIONS
Rinse hold
Avoids automatic spinning of the laundry at the end of the
programme. The laundry remains in the last rinse water, the
display indicates the rinse hold and the programme does not
continue.
Suitable for delicate laundry which is not appropriate for spinning,
or which should be spun with a low spin speed. Not suitable for silk.
To end the “Rinse hold” function, choose between:
• drain the water, no spin:
turn the knob to select spin speed “0” and press Start/
Pause: the water will be drained and the programme
ended
• spin the laundry:
the default spin speed blinks - start the spin cycle by
pressing Start/Pause. Or select a dierent spin speed by
turning the knob, press it to conrm, and press Start/
Pause.
Finish in
Enables to have the laundry ready at a particular time by
setting a delay until end of the programme.
Choose a delay up to 23 hours. Do not use liquid detergent with this
function.
• Select programme, temperature and options.
• Press the “Finish in” button – the symbol over the button lights up.
• Turn the knob to select a delay up to 23 hours. Conrm the desired
delay by pressing the knob.
• When you have nished your settings, press “Start / Pause” - the
countdown of the delay starts. The display indicates that Finish in
is active and that the washing machine is in waiting mode.
• The programme starts automatically, in time to be nished at the
end of the delay period. On programme start, the delay on the
display is replaced by the remaining programme duration.
To cancel the delay
• either press “Start/Pause” to cancel the delay; to start the selected
programme immediately, press “Start/Pause” again
• or press and hold “On/O” to cancel the complete
programme setting.
Key lock
To lock the buttons and knob of the control panel against
unwanted operation.
To lock:
• The washing machine must be switched on.
• Press and hold the option key until the key symbol on the control
panel lights up. Knob and keys are locked now. Only “On/O”
works.
If you switch the washing machine o and on again, the key lock will
remain active until you unlock it.
To unlock: press and hold the option key again for at least 3
seconds, until the key symbol goes o.
INDICATORS
Door can be opened
Failure: Observe the display message.
For any failures , refer to section Troubleshooting in the
“Use and Care Guide”.
Energy / Water monitor
Gives feedback about the energy and water
consumption of your programme setting.
The less indicators light up, the more economic is your
programme setting. Can still adapt after sensing phase
of laundry load.
Descaling
A display message will remind you regularly to descale the washing
machine. Find descaler appropriate for the washing machine on
www.whirlpool.eu.
To cancel the display reminder, press the knob.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

whirlpool-fscr-90430

Reset search

  • How do u reset the machine ..cotton sign is just gone instead shirts sign is coming up Submitted on 31-7-2024 at 00:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FSCR 90430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FSCR 90430 in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FSCR 90430

Whirlpool FSCR 90430 User Manual - English - 52 pages

Whirlpool FSCR 90430 Quick start guide - German - 8 pages

Whirlpool FSCR 90430 User Manual - German - 52 pages

Whirlpool FSCR 90430 Quick start guide - Dutch - 8 pages

Whirlpool FSCR 90430 User Manual - Dutch - 52 pages

Whirlpool FSCR 90430 Quick start guide - French - 8 pages

Whirlpool FSCR 90430 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info