793902
4
Zoom out
Zoom in
Previous page
1/4
Next page
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please
register your product on www.whirlpool.eu/register
Policies, standard documentation, ordering of spare parts and additional product information can be
found by:
Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.
EN
Quick guide
Before using the appliance carefully read the Safety
Instruction.
xxxxxxxxxxxx
xxxx
TROUBLESHOOTING EN
Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in few
minutes.
Malfunction Possible cause Solution
The tumble
dryer does not
turn on.
The plug is not inserted into the socket.
The plug is faulty.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, such as adapters or
A power failure occurred.
The tumble
dryer does not
start.
The door has not been closed properly.
A time delay was set to the start of the cycle. For machines equipped with this function: wait for the set delay to
end or switch the machine o to reset it. Refer to the Options section.
The "Start/Pause" button was not pressed in
order to start the programme.
Press the "Start/Pause" button.
The Key Lock function was enabled (for machines
equipped with this option).
Refer to the Options section. If Key Lock was selected, disable it.
Switching the machine o will not disable this option.
Garments are
wet at cycle
completion.
Small load.
so that the dryer completes the programme and stops. If this happens
simply select an additional short period of drying or select Extra Dry
Large loads or heavier fabrics. Dryness levels can be modi ed to the speci c dryness desired.
The drying
times are very
long.
An appropriate maintenance was not carried out. Refer to the Care & Maintenace section and perform the operations
The programme, the time and/or the drying level
set are not suitable for the type and the amount
of load inserted into the dryer.
Refer to Programmes and Options sections to  nd the programme
and options most suitable for the type of load.
The garments are too wet.
The dryer may be overloaded. Refer to the Programmes section to check the max load for each
programme.
Room temperature. The drying time may be longer if the room temperature falls outside
The programme
did not end.
A power failure occurred might have occurred. In case of power failure, it is necessary to press the "Start/Pause"
Lights on or  ashing
Water tank The water tank is full. Empty the water tank. Refer to the Care & Maintenance section.
Door  lter Failure of the air  ow necessary for machine
operation.
out these operations improperly may cause damages. Refer to Care &
Bottom  lter* The bottom  lter requires cleaning. Clean the bottom  lter. Refer to Care & Maintenance section.
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. The DEMO indicator
is on.
Disable the DEMO mode. The following actions must be carried out in
sequence, without breaks. Switch the machine on and then switch it o
again. Press the Start/Pause button until the buzzer is heard. Switch the
The presence
of wrench
symbol signals a
malfunction.
The machine sensors detected a failure.
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits  ashing on the display.
*Note: some models are auto-cleaning and not equipped with bottom  lter. Please refer to the Care & Maintenance section.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool FFTM119X2BXY BE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FFTM119X2BXY BE in the language / languages: English as an attachment in your email.

The manual is 3.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FFTM119X2BXY BE

Whirlpool FFTM119X2BXY BE User Manual - German - 4 pages

Whirlpool FFTM119X2BXY BE User Manual - Dutch - 4 pages

Whirlpool FFTM119X2BXY BE User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info