Manual Whirlpool FFD 11469E BCV BE (page 3 of 4) (English)

793706

Zoom out

Zoom in

1/4

Steam Hygiene

This option enhances washing performance by generating steam during

the wash cycle that eliminates any bacteria from bres while treating them

at the same time. Place the laundry in the drum, choose a compatible

programme and select option “ “.

! The steam generated during washing machine operation may cause the

porthole door to become hazy.

Easy Iron

By selecting this function, the wash and the spin cycles will be modied in

order to reduce the formation of creases.

Temperature

Every programme has a predened temperature. If you want to change the

temperature, press the “Temperature” button. The value appears on the

display.

Spin

Every programme has a predened spin speed. If you want to change the

spin speed, press the “Spin” button. The value appears on the display.

Demo mode

To deactivate this function, switch the washing machine OFF. Than press

and hold “Start/Pause” button, within 5 seconds press also

“ON/OFF” button and hold both buttons for 2 seconds.

KEY LOCK

To lock the control panel, press and hold the “KEY LOCK” button for

approximately 3 seconds. When the display visualises “KEY LOCK ON” the

control panel is locked (with the exception of the ON/OFF button). This

prevents unintentional changes to programmes, especially with children

near the machine. To unlock the control panel, press and hold the “KEY LOCK”

button for approximately 3 seconds.

BLEACHING

If you wish to bleach the laundry, load the washing machine and set the

“Rinse & Spin” programme.

Start the machine and wait for it to complete the rst water lling cycle

(roughly 2 minutes). Put the machine in pause mode by pressing the

“Start/Pause” button , open the detergent drawer and pour the bleach

(observe the recommended doses indicated on the package) into the

main wash compartment where the partition was previously mounted.

Restart the cycle by pressing the “Start/Pause” button .

If desired, it is possible to add fabric softener into the appropriate

compartment of the detergent drawer.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed bres, synthetics, wool,

handwash items). Colour (separate coloured and white items, wash

new coloured items separately). Delicates (wash small items – like

nylon stockings – and items with hooks – like bras – in a cloth bag or

pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption

are generally those that perform at lower temperatures and longer

duration. Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

DESCALE AND CLEAN PROCEDURE

A message on the display will regularly (roughly every 50 cycles) advise the

user to run an automatic cleaning cycle to clean the washing machine and

combat limescale build-up and bad odours.

For optimal maintenance we suggest using WPRO Limescale and grease

remover, according to the instructions shown on the package. The product

can be purchased by contacting the technical assistance service or through

the website www.whirlpool.eu.

Whirlpool declines all liability for any damages to the appliance caused by the

use of other cleaning products for washing machines available on the market.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch o and unplug the

washing machine. Do not use ammable uids to clean the washing

machine.

Clean and maintain your washing machine periodically (at least 4

times per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing

machine. Do not use glass or general purpose cleaners, scouring

powder or similar to clean the control panel – these substances

might damage the printing.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or

your specialist dealer. Depending on the hose type: If the inlet hose

has a transparent coating, periodically check if the colour intensies

locally. If yes, the hose may have a leak and should be replaced

Cleaning the water lter / draining residual water

If you used a hot wash programme, wait until the water has cooled

down before draining any water. Clean the water lter regularly, to

avoid that the water cannot drain after the wash due to obstruction

of the lter. If the water cannot drain, the display indicates that the

water lter may be clogged.

Remove the plinth by using the screwdriver: push downwards

one side of the plinth with your hand, then push the screwdriver

into the gap between plinth and front panel and pry open the

plinth. Place a broad, at container beneath the water lter, to

collect the drain water. Slowly turn the lter counterclockwise

until water ows out. Let the water ow out, without removing the

lter. When the container is full, close the water lter by turning it

in clockwise. Empty the container. Repeat this procedure until all

the water has drained. Lay a cotton cloth beneath the water lter,

which can absorb a small amount of rest water. Then remove the

water lter by turning it out anti clockwise. Clean the water lter:

remove residues in the lter and clean it under running water.

Insert the water lter and reinstall the plinth: Reinsert the water

lter again by turning it in clockwise direction. Make sure to turn it

in as far as it goes; the lter handle must be in vertical position. To

test water tightness of the water lter, you can pour about 1 liter of

water into the detergent dispenser. Then reinstall the plinth.

ACCESSORIES

Contact our After-Sales Service to check if the following accessories

are available for your washing machine model.

Stacking kit shelf

By which your dryer can be xed on top of your washing machine to

save space and to facilitate loading and unloading your dryer in the

higher position.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

Pull out the mains plug, and close the water tap. Make sure that

door and detergent dispenser are properly closed. Disconnect the

inlet hose from the water tap, and remove the drain hose from

your draining point. Remove all rest water from the hoses, and x

them so that they cannot get damaged during transport. Ret the

transport bolts. Follow the instructions for removing the transport

bolts in the INSTALATION GUIDE in reverse order.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FFD 11469E BCV BE in the language / languages: English as an attachment in your email.

The manual is 1.3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FFD 11469E BCV BE

Whirlpool FFD 11469E BCV BE Additional guide - German - 3 pages

Whirlpool FFD 11469E BCV BE User Manual - German - 4 pages

Whirlpool FFD 11469E BCV BE Additional guide - Dutch - 3 pages

Whirlpool FFD 11469E BCV BE User Manual - Dutch - 4 pages

Whirlpool FFD 11469E BCV BE Additional guide - French - 12 pages

Whirlpool FFD 11469E BCV BE User Manual - French - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool FFD 11469E BCV BE Manual

Product: