Manual Whirlpool FFB 10469E BV BE (page 2 of 4) (English)

793709

Zoom out

Zoom in

1/4

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels

of the laundry. The value given in the tub symbol is the

maximum temperature possible for washing the garment.

Mixed (Gemengde was/Mixte)

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

White (Witte was/ Blanc)

For washing normally to heavily soiled towels, underwear, table and bed

linen, etc in resilient cotton and linen. Only when the temperature is

selected at 90°C the cycle is provided with a prewash phase before main

washing phase. In this case it is recommended to add detergent both, in

the prewash and main wash section.

Cotton (Katoen/Coton)

Normally to heavily soiled and robust cottons .

Eco 40-60

For washing normally soiled cotton garments declared to be washable

at 40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most ecient in terms of water and energy

consumption.

Sport

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best

results, we recommend not exceeding the maximum load indicated in

the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and

adding the amount suitable for half-load.

Duvet (Dekbedden/Couette)

Designed for washing eiderdown padded items such as double or single

duvets, cushions and anoraks. It is recommended to load such padded

items in the drum with the edges folded inwards and not to exceed ¾ of

the drum’s volume. For optimal washing, we recommend using a liquid

detergent.

Steam Refresh

This programme refreshes garments by removing bad odours and

relaxing the bres (2 kg, roughly 3 items). Insert dry items only (that are

not dirty) and select programme “Steam Refresh”. Garments will be a

little damp at the end of the cycle and can be worn after a few minutes.

The “Steam Refresh” programme makes ironing easier.

! Not recommended for wool or silk garments.

! Do not add softeners or detergents.

Spin & Drain (Centrif. & Afpompen/ Essorage & Vidange)

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin (Spoelen & Centrif./Rinçage & Essorage)

Rinses and then spins. For resilient garments.

Rapid 30’ (Snel 30’/Rapide 30‘)

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool (Wol/Laine)

All wool garments can be washed using programme ‚“Wool“ even

those carryng the “hand-wash only “ label. For best results, use special

detergents and do not exceed max kg declaration of laundry.

Delicates (Fijne was/Délicat)

For washing particularly delicate garments. Preferably turn garments

inside out before washing.

Synthetics (Synthetisch/Synthétiques)

For washing soiled garments made from synthetic bres (such as

polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton” programme

at a temperature of 60°C. Pour a small quantity of detergent powder into

the main wash compartment of the detergent dispenser (maximum

1/3 of the quantity the detergent manufacturer recommends for lightly

soiled laundry). Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS” section. Load the laundry, close the door, open the water tap

and press the “ON/OFF” button to switch the wasching machine on,

the “Start/Pause” button ashes. Turn the programme selector to the

desired programme and select any option if needed. The temperature

and spin speed can be changed by pressing the “Temperature”

button or the “Spin” button. Pull out the detergent dispenser and

add the detergent (and additives/softener) now. Observe the dosing

recommendations on the detergent pack.

STARTING CYCLE

Close the detergent dispenser and press the “Start/Pause” button.

The machine will lock the door ( symbol on) and the drum will start

to rotate; the door will be unlocked ( symbol o) and then locked

again ( symbol on) as preparation phase of each washing cycle. The

“Clicking” noise is part of the door locking mechanism. Water will enter

the drum and start the washing phase once the door is locked.

PAUSE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” ; the indicator light

will go o and the remaining time on display ash. To start the wash cycle

from the point at which it was interrupted press the button again.

OPEN THE DOOR, IF REQUIRED

After starting a programme, the “Door locked” indicator lights up to

show that the door can not be opened. As long as a wash programme is

running, the door remains locked. To open the door while a programme

is in progress, press the “Start/Pause” to pause the programme.

Provided the water level and/or temperature is/are not too high, the

“Door locked” indicator light goes o and you can open the door.

For example to add or remove laundry. Press the “Start/Pause” button

again to continue the programme.

PROGRAMME END

The “Door locked” indicator light goes o and the display shows

“End”. To switch o the washing machine after programme ends press the

“ON/OFF” button, the lights goes o. If you do not press “ON/OFF”

button, the washing machine will switch o automatically after about a

10 minutes. Close the water tap, open the door and unload the washing

machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set,

the incompatibility will be signalled by a buzzer (3 beeps) and the

corresponding indicator light will ash.

! If the selected option is incompatible with another previously set

option, only the most recent selection will remain active.

Clean+

Clean+ is an option working on 3 dierent levels (Intensive, Daily

and Fast) that are specially designed to set the right washing action,

depending on your cleaning needs:

Intensive : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Daily : this option is designed to remove everyday stains.

Fast : this option is designed to remove lightly soiled stains.

Intensive rinse (Intensief spoelen - Extra Rinçage)

By selecting this option, the eciency of the rinse is increased and

optimal detergent removal is guaranteed. It is particularly useful for

sensitive skin. Press the button once, two or three times to select an

additional 1

, 2

or 3

rinses after the standard cycle rinse and

remove all traces of detergent. Press the button again to go back to the

“Normal rinse” rinse type.

Start delay (Start uitstel - Départ diéré)

To set the selected programme to start at a later time, press the button

to set the desired delay time. Symbol lights on the display when this

fuction is enabled. To cancel the delayed start, press the button again

untile the value ‚‘‘0‘‘ is shown on the display.

This option enhances washing performance by generating steam

to inhibit the proliferation of the main bad odour sources inside the

machine. After steam phase, the washing machine will perform gentle

tumbling through slow rotations of the drum. option starts after

the cycle ends for a maximum duration of 6h and you can interrupt it at

any time by pressing any button on control panel or turning the knob.

Wait around 5 minutes before door can be opened.

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the „Temp.“ button. The value appears on the

display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool FFB 10469E BV BE in the language / languages: English as an attachment in your email.

The manual is 1.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool FFB 10469E BV BE

Whirlpool FFB 10469E BV BE User Manual - German - 4 pages

Whirlpool FFB 10469E BV BE User Manual - Dutch - 4 pages

Whirlpool FFB 10469E BV BE User Manual - French - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool FFB 10469E BV BE Manual

Product: