Manual Whirlpool BIWMWG71483EEUN (page 3 of 4) (English)

756811

Zoom out

Zoom in

1/4

(*) Wait around 5’ before open the door.

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the “Temperature” button. The value appears on

the display.

Spin

Every programme has a predened spin speed. If you want to change the

spin speed, press the “Spin” button. The value appears on the display.

Demo mode

To deactivate this function, switch the washing machine OFF. Than press

and hold “Start/Pause” button, within 5 seconds press also

“ON/OFF” button and hold both buttons for 2 seconds.

KEY LOCK

To lock the control panel, press and hold the “Key lock” button for

approximately 3 seconds. The symbol will light up on the display

to indicate that the control panel has been locked (with the exception

of the “ON/OFF“ button). This prevents unintentional changes to

programmes, especially with children near the machine. To unlock the

control panel, press and hold the “Key lock” button for approximately

3 seconds .

BLEACHING

If you wish to bleach the laundry, load the washing machine and set the

“Rinse & Spin” programme .

Start the machine and wait for it to complete the rst water lling cycle

(roughly 2 minutes). Put the machine in pause mode by pressing the

“Start/Pause” button, open the detergent drawer and pour the bleach

(observe the recommended doses indicated on the package) into the

main wash compartment where the partition was previously mounted.

Restart the cycle by pressing the “Start/Pause” button.

If desired, it is possible to add fabric softener into the appropriate

compartment of the detergent drawer.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured

items separately). Delicates (wash small items – like nylon stockings – and

items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch o and unplug the washing

machine . Do not use ammable uids to clean the washing machine .

Clean and maintain your washing machine periodically (at least 4 times

per year).

Disconnect the water and power supplies

Close the water tap after every wash. This will limit wear on the

hydraulic system inside the washing machine and help to prevent

leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

Clean the washing machine

The outer parts and rubber components of the appliance can be

cleaned using a soft cloth soaked in lukewarm soapy water. Do not use

solvents or abrasives.

Clean the detergent dispenser drawer

Wash it under running water; this operation should be repeated

frequently.

Care for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant

odours from forming.

Clean the pump

The washing machine is tted with a auto-cleaning pump that does

not require any maintenance. Small items (such as coins or buttons)

may sometimes fall into the protective pre-chamber situated at the

base of the pump.

! Make sure the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

2. clean the inside thoroughly;

3. screw the cover back on;

Check the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken,

it must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

Pull out the mains plug, and close the water tap. Make sure that door

and detergent dispenser are properly closed. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses, and x them so that they cannot

get damaged during transport. Ret the transport bolts. Follow the

instructions for removing the transport bolts in the INSTALLATION GUIDE

in reverse order.

Quick guide

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool BIWMWG71483EEUN in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool BIWMWG71483EEUN

Whirlpool BIWMWG71483EEUN Quick start guide - German - 4 pages

Whirlpool BIWMWG71483EEUN Quick start guide - Dutch - 4 pages

Whirlpool BIWMWG71483EEUN Quick start guide - French - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Whirlpool BIWMWG71483EEUN Manual

Product: