539741
13
Zoom out
Zoom in
Previous page
1/13
Next page
13
TROUBLESHOOTING GUIDE/
AFTER-SALES SERVICE
If a fault occurs, before contacting our After-
Sales Service, perform the following checks to
try to remedy the problem:
Drying takes too long / laundry is not dry
enough:
Correct programme selected?
Laundry too wet (Washing machine spin speed less
than 1000 rpm? When the spin speed is less than
1000 rpm a water container fault may occur during
the drying cycle).
Lint filter clogged (filter indicator lamp on?)
Heat exchanger clogged? (refer to the sections
“CLEANING THE LINT FILTER/CLEANING THE
HEAT EXCHANGER”).
Is the ambient temperature too high?
END indicator lamps on? The drying cycle is
complete and the laundry can be taken out.
‘Gentle’ option selected? The ‘Gentle’ option should
only be selected with small loads.
Mixed laundry load (for example cotton and
synthetics).
The dryer does not operate:
(after a power failure and/or interruption to the
mains supply, always press the
“Start (Pause)”
button).
Plug connector properly inserted into the mains
electricity socket?
Power failure?
Fuse blown?
Door properly closed?
Drying programme selected?
Start delay option selected?
“Start (Pause)”
button activated?
Indicator lamps are lighting up?
Lint filter, water container or heat exchanger
indicator lamp on:
Lint filter clean?
Water container empty?
Water container correctly positioned?
Heat exchanger clean and correctly positioned?
Water droplets underneath the dryer:
Heat exchanger correctly positioned?
All lint on the heat exchanger seal removed?
All lint on the door seal removed?
Water container positioned correctly?
Dryer levelled?
After-Sales Service
If, after carrying out the above checks, the
malfunction persists or reoccurs, turn the
dryer off and call the After-Sales Service
(refer to warranty).
Please specify:
The nature of the fault.
The dryer type and model.
The service code (the number after the word Service
on the adhesive rating plate) on the lower side of the
door opening.
Your full address and phone number.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AZB 9782 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AZB 9782 in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AZB 9782

Whirlpool AZB 9782 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info