573412
11
Zoom out
Zoom in
Previous page
1/18
Next page
11
Cleaning the heat exchanger
Before any cleaning or maintenance, switch off the dryer.
Clean the heat exchanger at least every month, or whenever the heat exchanger indicator lamp
lights up (if available on your model), proceeding as follows.
A. Open the heat exchanger flap.
B. Turn the two locking bars at the side of the heat exchanger
towards the middle, to the horizontal position, and pull the heat
exchanger out.
C. Hold the heat exchanger as shown in the picture. Clean it
under running water by turning it around to reach all sides,
especially in front and behind. Wipe away dust and lint from
the heat exchanger seals and plates.
Clean the inside of the heat exchanger plates under running
water, from the front side to the back.
D. Remove the lint from the heat exchanger housing by hand or
with a damp cloth. Clean the entire housing from the back to
the front side, ensuring that all lint is removed.
Fully insert the heat exchanger back into the housing (TOP or
HAUT mark upwards) and lock it again by turning the locking
bars back to their original position.
The heat exchanger does not need to be dry when it is
reinserted after cleaning.
Insert and latch the flap again. The flap can only be closed if the
heat exchanger is correctly positioned.
The heat exchanger indicator lamp will switch off
automatically when you start the next drying cycle.
The heat exchanger aluminium plates may become discoloured
over time, depending on the model of your dryer.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AZB 6670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AZB 6670 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AZB 6670

Whirlpool AZB 6670 User Manual - German - 18 pages

Whirlpool AZB 6670 User Manual - Dutch - 17 pages

Whirlpool AZB 6670 User Manual - French - 17 pages

Whirlpool AZB 6670 User Manual - Polish - 11 pages

Whirlpool AZB 6670 User Manual - Swedish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info