71302
17
Zoom out
Zoom in
Previous page
1/17
Next page
GB 17
ELECTRICAL CONNECTION
Do not use extension leads or multi sockets.
Electrical connections must be made in accordance
with local regulations.
1) Warning - this appliance must be earthed
This appliance is normally supplied with a mains lead having
a plug fitted in the factory which has been checked for
correct earth continuity.
If the fitted plug is not suitable for your socket outlet, or if
the machine’s mains lead is not fitted with a plug, you
should fit a suitable new, good quality plug by following the
instructions in (2) below.
Any unsuitable plug should be cut off and disposed of in
order to avoid a possible shock hazard should it be
inserted into a socket.
2) CONNECTION TO A REWIRABLE PLUG - to be
carried out only by a qualified electrician
The wires in the mains lead are coloured in accordance
with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN AND YELLOW - “EARTH” (“E”)
Valid Only For Great Britain And Ireland
To fit a new plug, proceed as follows:
2.1 Polarized Plugs (e.g. 3 pin, 13 amp plug
conforming to BS 1363A)
a.
The GREEN AND YELLOW wire must be connected
to the terminal in the plug which is marked with the
letter “E” or by the Earth symbol or coloured
green and yellow.
b.
The BLUE wire must be connected to the terminal
which is marked with the letter “N” or coloured blue.
c.
The BROWN wire must be connected to the terminal
which is marked with the letter “L” or coloured
brown.
2.2
Non-polarized plugs (e.g. 2 pin with side earth
contact). The wire which is coloured GREEN AND
YELLOW must be connected to the earth contact.
The other two wires should be connected to the two
pins, irrespective of colour.
Fuse replacement
If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, replace the fuse only with an
A.S.T.A. approved type conforming to BS 1362 and
proceed as follows:
1.
Remove the fuse cover (
A
) and fuse (
B
).
2.
Fit the replacement 13 A fuse into the fuse cover.
3.
Refit both into plug.
IFU_Alpha_Sc1-mech_GB.fm Page 17 Wednesday, March 30, 2005 6:52 PM
Black process 45.0° 100.0 LPI
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWT 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWT 5100 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWT 5100

Whirlpool AWT 5100 Quick start guide - English - 2 pages

Whirlpool AWT 5100 User Manual - German - 16 pages

Whirlpool AWT 5100 Quick start guide - Dutch - 2 pages

Whirlpool AWT 5100 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info