641526
9
Zoom out
Zoom in
Previous page
1/15
Next page
GB9
TROUBLESHOOTING GUIDE
Yourwashingmachineisequippedwithvariousautomaticsafetyfunctions.Theseenablefaultstobe
detectedingoodtimeandthesafetysystemcanreactappropriately.Thesefaultsarefrequentlysominor
thattheycanberemovedwithinafewminutes.
Problem Causes - Solutions - Tips
Appliance does not start,
no indicators are on
• Plugisnotproperlyinsertedinsocket.
• Socketorfusedoesnotfunctioncorrectly(useatablelamporsimilar
appliancetotestit).
Appliance does not start
although “Start(Pause)”
has been pressed
• Doorisnotproperlyclosed.
• The“Childlock/Lockbuttons”featurehasbeenactivated(ifavailable
onyourmodel).Tounlockthebuttons,pushthetwobuttonsmarked
withthekeysymbolsimultaneouslyandholdthematleastfor3seconds.
Thekeysymbolonthedisplaydisappearsandtheprogrammecanbe
started.
Appliance stops during the
programme, and the
“Start(Pause)” indicator
blinks
• “Rinsehold”isactivated.Press“Start(Pause)”tospinthelaundry.For
drainingthewaterwithoutspinning,select“Drain”programme(ifavail-
able)orpressthe“Reset/Drain”buttonforatleast3seconds.
• Programmehasbeenchanged-reselectdesiredprogrammeandpress
Start/Pause”.
• Programmehasbeeninterruptedandeventuallydoorhasbeenopened
-closedoorandrestartprogrammebypressing“Start(Pause)”.
• Theappliance’ssafetysystemhasbeenactivated(see“Failureindicators”
inyourprogrammechart).
• Watertapisnotopenedorwaterinlethoseiskinkedorblocked(“Water
tapclosed”indicatorblinks).
Detergent dispenser
contains residues from
detergent and/or additives
• Waterenteringisnotenough;themeshfiltersofthewatersupplycould
beblocked(see“CareAndMaintenance”).
Appliance vibrates during
spin cycle
•Transportboltshavenotbeenremoved;before using the machine, it is
imperative that the transport bolts are removed.
•Applianceisnotlevel/notstandingfirmlyonallfourfeet(seeseparate
“InstallationGuide”).
Final spin results are poor
• Unbalanceduringspinningpreventedspinphasetoprotectthewashing
machine(see“Unbalanceduringspinning”).
• Excessivefoamformationpreventedspinning;selectandstart“Rinse&
Spin”programme.Avoidexcessivedetergentdosing(see“Detergents
AndAdditives”).
• “Spin”buttonhasbeensettoalowspinspeed.
“Unbalance during spinning”
The “Spin/Drain” indicator
in the programme flow bar
blinks, or the spin speed on
the display blinks, or the spin
speed indicator blinks after
the end of the programme
(depending on the model).
The laundry is still very wet.
Unbalanceofthelaundryloadduringspinningpreventedthespinphase
toavoiddamagesonthewashingmachine.Thisiswhythelaundryisstill
verywet.
Reasonforunbalancecanbe:smalllaundryloads(consistingofonlyfew
quitebigorabsorbentitems,e.g.towels),orbig/heavylaundryitems.
• Ifpossibleavoidsmalllaundryloads.
• Itishighlyrecommendedthatyouaddotherlaundryitemsofdifferent
sizeswhenwashingabigorheavypieceoflaundry.
Ifyouwanttospinthewetlaundry,addmorelaundryitemsofdifferent
sizes,andsubsequentlyselectandstartthe“Rinse&Spin”programme.
The washing machine is at a
standstill for several minutes
in the middle of a running
programme; the wash
programme seems not to
proceed
Normalfunctionofthewashingmachineusedforoptimizingtherinsephase.
Onereasonforsuchapausecanbethatyoumighthaveusedtoomuchdeter-
gent;thewashingmachineautomaticallyinterruptstheprogrammetohave
thefoamreduced.Thisstandstillmayberepeatedseveraltimesuntilthe
foamreductionissufficienttocontinuethewashcycle.Ifthefoampersists,
thered“Service”indicatorwilllightupandthedisplayshows“F18”or“Fod”
-refertotheinstructionsconcerningthe“Service”indicationonthenext
pagesinthiscase.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWO-C 81400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWO-C 81400 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWO-C 81400

Whirlpool AWO-C 81400 Quick start guide - English - 2 pages

Whirlpool AWO-C 81400 User Manual - German - 14 pages

Whirlpool AWO-C 81400 Quick start guide - German - 2 pages

Whirlpool AWO-C 81400 User Manual - Dutch - 14 pages

Whirlpool AWO-C 81400 Quick start guide - Dutch - 2 pages

Whirlpool AWO-C 81400 User Manual - French - 14 pages

Whirlpool AWO-C 81400 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info