308265
10
Zoom out
Zoom in
Previous page
1/14
Next page
GB 10
TROUBLESHOOTING GUIDE
Your washing machine is equipped with various automatic safety functions. These enable faults to be
detected in good time and the safety system can react appropriately. These faults are frequently so minor
that they can be removed within a few minutes.
Problem Causes, Solutions, Tips
Appliance does not start,
no indicator lamps are on
Plug is not properly inserted in socket.
Socket or fuse does not function correctly (use a table lamp or similar
appliance to test it).
the “On/Off” button has not been pressed (if available on your model).
Appliance does not start
although “Start/Pause”
has been pressed
Door is not properly closed (see also “Child Safety”).
The “Lock buttons” feature has been activated (if available on your
model). To unlock the buttons, push the temperature and the spin speed
button simultaneously and hold them at least for 3 seconds. The key
symbol on the display disappears and the programme can be started.
Appliance stops during the
programme, and the
“Start/Pause” light flashes
“Rinse hold” option is activated (if available on your model) and
(Anticrease) lights up in the programme sequence indicator -
terminate “Rinse hold” by pressing
“Start/Pause”
or by choosing and
starting “Drain” programme.
Programme has been changed - reselect desired programme and press
“Start/Pause”
.
Programme has been interrupted and eventually door has been opened -
close door and restart programme by pressing
“Start/Pause”
.
The appliance’s safety system has been activated (see “Description of red
indications”).
Water tap is not opened or water inlet hose is kinked (“Water tap closed”
indication lights up).
Detergent dispenser
contains residues from
detergent and/or additives
Separator in main wash chamber is not correctly installed or not adapted
to use of powder and liquid detergent (see “Detergents And Additives”).
Water entering is not enough; the mesh filters of the water supply could
be blocked (see “Care And Maintenance”).
Appliance vibrates during
spin cycle
Transport bolts have not been removed;
before using the machine, it
is imperative that the transport bolts are removed.
Appliance is not level / not standing firmly on all four feet (see separate
“Installation Guide”).
Final spin results are poor
The appliance has an imbalance detection and correction system. If
individual heavy items are loaded (e.g. bathrobes), this system may reduce
the spin speed automatically or even interrupt the spin completely in order
to protect the washing machine.
Heavy item(s) prevented spinning; add smaller articles of laundry and
repeat spin cycle.
Excessive foam formation prevented spinning; select and start “Rinse &
Spin” programme. Avoid excessive detergent dosing (see “Detergents
And Additives”).
“Variable spin” button (if available on your model) has been set to a low
spin speed, or “No spin” option (if available on your model) has been
activated.
Programme time initially
displayed is lengthened /
shortened by a period of
time (only for appliances
having a display which
indicates the remaining
programme time)
Normal capacity of the appliance to adapt to factors that can have an effect
on the wash programme time, e.g.: Excess of foam formation, load
imbalance due to heavy items of laundry, prolonged heating time resulting
from reduced inlet water temperature.
Due to such influences, the programme time is recalculated and updated if
necessary.
On certain displays (depending on the model), an
animation appears during such update periods.
30105990GB.fm Page 10 Tuesday, February 13, 2007 11:13 AM
Black process 45.0° 100.0 LPI
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awo 866 6kg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awo 866 6kg in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool awo 866 6kg

Whirlpool awo 866 6kg Quick start guide - English - 2 pages

Whirlpool awo 866 6kg User Manual - English - 13 pages

Whirlpool awo 866 6kg Quick start guide - German - 2 pages

Whirlpool awo 866 6kg User Manual - German - 14 pages

Whirlpool awo 866 6kg Quick start guide - Dutch - 2 pages

Whirlpool awo 866 6kg User Manual - Dutch - 13 pages

Whirlpool awo 866 6kg Quick start guide - French - 2 pages

Whirlpool awo 866 6kg User Manual - French - 13 pages

Whirlpool awo 866 6kg User Manual - Turkish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info