38275
29
Zoom out
Zoom in
Previous page
1/32
Next page
Home
Appliances
INSTALLATION
Remove the transit bolts
1.
Slacken the four bolts with the spanner supplied. In
addition, open the plastic loop wrapped round the
power cable.
Do not cut the loop.
2.
Unscrew the bolt by hand.
3.
Grip the bolt and remove it through the large aperture.
4.
Seal the resulting holes using the plastic caps supplied.
To do this, insert the caps in the wide part of the hole
in the direction of the arrow and push them into the
narrow groove until they click into place.
5.Keep the transit bolts for future use.
Whenever the appliance is transported, the transit bolts
must be refitted:
1.
Raise the plastic covers with a screwdriver, slide them
in the opposite direction of the arrow and remove.
2.
Insert the transit bolts in the reverse order.
7gb14811.fm Page 11 Tuesday, November 5, 2002 12:58 PM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool AWM9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool AWM9100 in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool AWM9100

Whirlpool AWM9100 Quick start guide - English - 3 pages

Whirlpool AWM9100 Quick start guide - German - 3 pages

Whirlpool AWM9100 User Manual - German - 12 pages

Whirlpool AWM9100 User Manual - Dutch - 12 pages

Whirlpool AWM9100 Quick start guide - French - 3 pages

Whirlpool AWM9100 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info