304151
7
Zoom out
Zoom in
Previous page
1/18
Next page
26
WASHING PROGRAMME
Selecting the programme:
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Set the
Programme Selector
knob to the desired programme.
4.
Select additional
options
, if desired, pressing the corresponding button.The indicator lights up.
By a
further pressing
of the button this option can be turned off again.
5.
Press the
“Start/Pause”
button.
The indicator light will come on and the programme duration is shown on the display (if available).
The indicator lamps show the sequence reached in the programme. After starting the programme, the
sequence indication runs from left to right through Wash, Rinse, Spin.
When the sequence of the programme is finished the corresponding lamp goes out.
Options
(depending on model)
Easy Ironing
Can be used together with Cotton and Synthetics programmes to make ironing
easier.
Increases the water quantity and the clothes are spun very gently.
Energy save/
Eco
Increases the programme time and reduces the temperature. This reduces energy
consumption by about 30% without compromising the excellent results of the
wash.
Prewash
Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle
time increases approximately 15 min.
Quick wash /
Rapid
Select for quick, economical washes.
Especially suitable for small, lightly soiled loads.
Note:
If “Quick wash” is selected, only the “Rinse Hold” and “Spin speed reduction”
options can be activated.
Intensive
Rinse
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for areas with particularly soft
water, for baby clothes and to help people with allergies.
Rinse hold /
Spin delay
The laundry remains in the last rinse water without being spun, to avoid heavy creasing.
Especially suitable for the “Synthetics” or “Delicates” programmes, if the laundry
is not to be unloaded immediately after the end of the programme. This function
is particularly useful if you want to postpone spinning to a later time or when you
do not wish to spin the clothes.
Note:
The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the
programme flow indication is on.
Continuing wash cycle after rinse hold:
Press the Rinse hold button again; the load will be spun according to the selected
programme.
If you do not wish to spin the clothes, turn the programme selector knob to the
drain programme and press the
“Start/Pause”
button
Spin speed
reduction
Press this button to reduce the predetermined automatic maximum spin speed. In
some programmes the maximum final spin speed is limited to go easy on your
laundry items. Selection of a higher spin speed is not possible.
With the "Cotton" and "Synthetics" programmes a short spin cycle is provided in any case,
even if the exclusion has been selected, in order to optimize rinsing results.
If the spin speed “0” is selected, the final spinning is cancelled. The water is
drained out only.
3gb05030.fm5 Page 26 Monday, September 17, 2001 3:33 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Whirlpool awm 6141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Whirlpool awm 6141 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Whirlpool awm 6141

Whirlpool awm 6141 Quick start guide - English - 2 pages

Whirlpool awm 6141 User Manual - German - 19 pages

Whirlpool awm 6141 Quick start guide - German - 2 pages

Whirlpool awm 6141 Quick start guide - Dutch - 2 pages

Whirlpool awm 6141 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info